• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.1-19
• /
• 2012

According as gradually increasing the demand for eco-friendly at the printing process, it has been progressed fairly development. Especially, the inks are used by soy oil beginning of ink industry for preventing environment, it is possible to make eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents at all for preventing environment. These eco-friendly inks have a benefits they are able to use the renewable resource. But basically vegetable oils have that reduce the VOC(Volatile Organic Compound) and high viscosity, high solubility properties. So if the vegetable oils use in the ink, set off problem occur on the paper because of slow drying time. In case of vegetable ester, it has similar the molecular weight and kinetic viscosity with hydrocarbon solvent, it is able to control the power of dilution about the resin. So, it has benefit that solve the problem of the existing eco-friendly inks. In this study, different types of ester were made by six types of vegetable oils and used ester in the varnishes and inks properties are comparison with hydrocarbon solvent based ink. By considering the intrinsic properties of vegetable oil, ester used to analyze the changes in ink properties, using ester varnish is applied to study the rheology characteristics and emulsification with inks.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.65-65
• /
• 2011

천연염색에 대한 관심이 높아지고 있지만 색상의 재현성, 견뢰도의 취약성, 디자인의 제한성의 문제로 실용화의 한계에 부딪히고 있다. 이를 극복하기 위하여 본 연구는 침염 위주의 천연 염색에서 벗어나 키토산을 바인더로 이용하는 날염의 유효성을 검토하고자 한다. 본 연구에서는 키토산을 바인더로 이용한 방법을 제시하고자 키토산과 광물성, 동 식물성 안료를 혼합하여 날염호를 조제하여 날염하였다. 키토산의 점도와 농도, 키토산을 이용한 바인더와 안료의 비율 등을 변화시키고 날염직물의 색상과 염착량, 세탁 일광 마찰 견뢰도를 측정하여 적정조건을 도출하였다. 기존의 합성바인더와 구아검을 사용한 경우의 색상, 염착량, 견뢰도와 비교하여 키토산 날염 바인더로서의 유효성을 검토하였다. 키토산을 바인더로 이용한 날염방법에서 적정 점도는 저 중점도, 농도는 1.7%정도가 적절한 것으로 판단하였다. 날염호 제조시 안료의 비율을 증가시켜 진한 색상을 얻을 수 있었으며, 그 비율은 광물성 안료의 경우 1:4, 동 식물성 안료의 경우 1:10까지 변화시켜 명도의 차이를 나타낼 수 있다. 실험결과를 바탕으로 적정조건에서 날염한 직물의 견뢰도를 평가한 결과, 광물성 안료의 경우 4등급 이상, 동 식물성 안료의 경우 3등급 이상으로 우수하게 평가되었다. 안료의 비율이 높아지면 마찰 견뢰도는 감소하였다. 키토산, 구아검, 합성바인더의 색상과 견뢰도를 비교해 본 결과 색상은 동일한 계열로 나타났으며, 키토산을 바인더로 이용한 경우 세탁, 일광, 마찰 견뢰도는 구아검보다 우수하게 평가되었다. 합성바인더의 경우 세탁, 마찰 견뢰도는 비슷하게 나타났으며, 일광견뢰도의 경우 키토산이 더 우수하게 평가되었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2010

Printing technologies have been indicated as alternative methods for patterning conductive, semi-conductive or insulative materials on account of their low-cost, large-area patternability and pattern flexibility. For application of the printing technologies in manufacture of semiconductor or display modules, ink or paste composed of nanoparticles, solvent and additives are basically needed. Here, we report recent advances in eco-friendly nano-ink technology for semiconductor and display technology. Then, we will introduce an eco-friendly ink formation technology developed in our group with an example of manufacturing $SiO_2$ nanopowders and inks. We tried to manufacture ultrafine $SiO_2$ nanoparticles by applying a low-temperature synthetic method, and then attempted to fabricate the printed $SiO_2$ film onto the glass substrate to see whether the $SiO_2$ nanoparticles are feasible for the printing or not. Finally, the electrical characteristics of the films were measured to investigate the effect of the manufacturing parameters.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• Journal of the Korean Chemical Society
• /
• v.65 no.4
• /
• pp.260-267
• /
• 2021

Increasing the needs for eco-friendly natural materials, much attention on natural dyes has been attracted. Curcumin, one of abundant natural dyes available in nature, is an eco-friendly molecule found in turmeric. In this study, the colorimetric sensing behavior characteristics of ammonia and hydrogen chloride gases was analyzed using curcumin ink-printed paper and cotton fabric by inkjet printing method. The fabricated paper and fabric were utilized as a colorimetric sensor that can track food spoilage. The color changes of the samples printed on the paper and cotton upon exposure to the toxic gases, the reversibility of the color changes, and the water resistance were investigated. Both samples showed reversible reactions with NH3 and HCl, and small amount of ammonia produced by food spoilage was successfully sensed with naked eyes, confirming its capability to warn food spoilage in our daily life.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.209-216
• /
• 2011

This paper, the shielding material is suggested using by the korean paper, lacquer, and charcoal those can be used more eco-friendly materials for the interior design. Also, it is designed the image-wall for improving of the electromagnetic shielding and the beauty. Suggested shielding material is manufactured with the thickness of 2 mm by the printing method of the lacquer and charcoal on the korean paper. This material has the shielding effectiveness over 95% until 2 GHz. The application for the interior design using more eco-friendly material can be reduced the effect of electromagnetic wave and the chemical substances like as the formaldehyde and the volatile organic compound (VOC).

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.173-182
• /
• 2020

Since 2000, Korea has seen a big trend in the market, as the EU tightened regulations on environment due to global warming, high oil prices and aging rural population distribution, strengthening the need for multi-purpose electric moto vehicles for small farmers based on eco-friendly energy. Multi-purpose electric motor vehicles for rural small businesses will be a very innovative means of transportation, not only maintained at a low cost and to reduce greenhouse gases through the activation of eco-friendly energy, but also be a very innovative means of transportation for reducing the labor intensity of the aging farming industry and transporting night work and logistics. In this paper, with the implementation of eco-friendly energy policies, small and medium-sized rural small business owners can easily operate on unpaved roads and well-drawn farming environments, while the intensity of labor can be reduced when transporting crops also can simply replace parts at a low cost in the event of an accident. To propose rural multi-purpose modular electric vehicles, the existing literature is reviewed and 12 modular parts are presented by benchmarking electric vehicles at home and abroad. This paper is thought to be helpful for the research of the industry as well as the design industry of modular electric vehicles.