• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.173-177
• /
• 2009

A total of 3 epiphytic macroalgae were collected from eelgrass bed in Jindong Bay, and Scytosiphon lomentaria and Colpomenia sp. in Phaephyta, Gracilaria sp. in Rhodophyta occurred during study periods. For epiphytic microalgae (diatoms), Cocconeis scutellum and Cocconeis placentula were common species. Seasonal variations of epiphytic algal biomass were marked: the higher epiphytic macroalgae was 3.3 g $DW/m^2$ in November 2003; whereas epiphytic diatoms were 43,153 $cells/m^2$ in June 2003. Diversity and number of epiphytic macroalgae species were the lowest in the study area, compared with those of in other areas such as Koongyang Bay, Dongdae Bay, and Aenggang Bay. These results were therefore likely due to the severe physical characteristics of the intertidal mudflat eelgrass biological characteristics, and the deterioration of water quality.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.84-95
• /
• 2006

This study begins by examining the reason for the lack of urban planning that takes the water cycle into consideration. While there are institutions that support environmentally friendly development or smooth water circulation, these designs are not reflected in planning nor in the real world. After reviewing foreign case studies, policy suggestions and possible policy implications for Korea are derived. In Korea, there is not a sufficient level of relevant laws or institutions systematically established to make it possible to deal with rainwater in a decentralized way. Instead, facility standards or guidelines are considered separately for the control of water and for preventing natural disasters. And even though an environmentally friendly approach is stipulated in relevant laws in terms of spatial planning, there are no planning systems or implementation tools to actualize this kind of approach. The factors that make decentralized rainwater management possible in urban planning are analyzed based on the case study of Germany. Germany requires developers to plan in order to achieve ecological urban development. In addition, as a detailed implementation tool to promote conservation of the water cycle, the law provides for various kinds of measures such as restrictions on the proportion of impervious surface area according to the use of the land, required compensation measures for environmental degradation following development, introduction of a fee for rainwater runoff and the establishment of ecological landscape planning. The actual reason these measures can be implemented however is the provision of planning guidelines and design criteria for rainwater utilization, absorption and containment, and the construction of a database for various environmental information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.64-72
• /
• 2004

The research was carried out to define the environmental characteristics and vegetation structure of the evergreen fern habitat in Jejudo. The growth conditions of evergreen fern in various habitats was surveyed, including topographical features, vegetation structure, air temperature, humidity, intensity of light, water content and organic matter content in the soil. In the direction of the native habitat, 70% of research area was located in the southeast-facing slopes, 30% was located in southern slopes. The gradient ranged from $0^{\circ}$ to $30^{\circ}$. Temperature ranged from $16^{\circ}C$ to $28^{\circ}C$, and $22.3^{\circ}C$ was the average. Humidity ranged from 20 to 68%, and 36% was the average. In the native habitat, the highest light intensities reached 60,000 to 80,0001ux, but in general ranged from 300 to 40001ux. Water content in the soil ranged from 32% to 59%, organic matter content ranged from 8 to 13%. Within a unit of 25$m^2$, there were tall-tree layer such as Quercus galuca and Castanopsis cuspidata with a covering of rate 40~80%, a sub-tall-tree layer such as Camellia japonica, Staphylea bumalda and Sambucus williamsii with the covering rate of 3~5%, a shrub layer with the covering rate of 5~20%, and a grass layer with the covering rate of 40~95%. This research provides the basic data about the native habitat environment of the evergreen fern plant. Continuous monitoring and accumulation of data is necessary for the use of evergreen fern as vegetation materials.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2011

The purpose of this study is to derive the actually applicable directions and measures for conservation and restoration according to biotope types. Recently biotope project-installing eco-river, restoring damaged area, protecting habitate for flora and fauna- is processed according to being interested in making and restoring the biotope. But it is lack of study to estimate and systematize which biotope preserve and restore primary. For this purpose, the direction and measures of conservation and restoration be applicable to actuality are drafted by a review on the preceded case studies until now at the inside and outside of the country. And then this study proposed the concept, direction and measures for the effective systematic biotope management through continual feed back such as field applications in selected case study areas and consultations. First, the applicable directions and measures for conservation and restoration according to biotope types is suggested with the 'conservation' divided into two parts; protection and maintenance, the 'restoration', and the 'enhancement' divided into two parts; improvement and creation. Second, for the effective biotope management, the biotope types are classified into urban type, agricultural types and natural types according to the naturalness and dominant landscape. However, this study suggests that the direction and measures suitable to the regional conditions should be reviewed enough and selected and also the detail measures should be supplemented with the foundation of directions and measures for biotope conservation and management proposed in this study because the biotope management should consider regional characteristics.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.89-104
• /
• 2011

This study was carried out to the development of ecological planting model to make up of coastal windbreak forest on the Suncheon-bay in Sucheon-si, Korea. Make up of coastal windbreak forest in this site was needed for appropriate bioresource, biodiversity and ecological structure, and for conservation of the eco-tour resource and protection of human life and property by the unforeseen disaster from the coast. Based on the plant-social principle, the planting model of windbreak forest was developed to facilitate growth of trees, considering planting locations. The ecological planting model for the coastal windbreak was composed of warm temperate evergreen and windbreak forest which is spreading around the inland area in Korea. The horizontal forest style was composed of forest edge community and inner forest community, and the vertical forest style was composed of upper, middle, low and ground planting class. The target of the present model was quasi-natural forest, and the species of tree were selected based on the adaptability to surroundings depending on a goal to create a forest and forest style. To achieve both functions of wind break forest and visual effect in short period of time, small trees and seedlings were planted with high-density of 40,000/ha in an expectation of easy natural maintenance in the future. The significance of the present study is a suggestion for a guideline to create ecological coastal windbreak forest in the Suncheon-bay in which the harmony of human life and the ecological conservation is of great importance. Also, the ecological coastal windbreak forest model should be developed further through the long term monitoring after construction of forest.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.5
• /
• pp.47-57
• /
• 2016

In the recent years, the incidence of abandoned concrete roads have been increasing rapidly due to road improvements and facilities route construction, these abandoned expressway and unused roads are scattered throughout the country but the management system is not clear, they does not be an effectively managed because there is no maintenance cost. In response to these social concern and expectation, the Korea Expressway Corporation that is management authority of the expressway is developing policy initiatives and various projects to restore the closed road to ecological for eco-friendly projects of the existing expressway. And as part of these projects, Hwanggan IC unmanaged abandoned concrete roads restoration project was done and it was conducting monitoring for ecological restoration that is not one-off but sustainable. After test construction over seven years at the time, test construction of four ways enforced but the boundaries have become blurred over time. And Pinus koraiensis, Callicarpa dichotoma and Sorbaria stellipilla var. typica planted in the site are dominating, else Amorpha fruticosa and Indigofera pseudotinctoria sowed are dominating. Invasive species is that Robinia pseudoacacia was growing in the colony. Over monitoring result time, the vegetation was taking root and the ecosystem was being restore. But the disturbance of vegetation happens due to planting of tree species that doesn't fit in the restoration area and advent of ecosystem Disturbing Species. The study will be providing a basic data that identify change of plant environment by monitoring of the site and soil environment during June to November 2016 and secure an objective evaluation data by analyzing the effects of ecological restoration for revegetation test bed evaluation for ecological restoration of expressway in ecological restoration construction in later.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.439-445
• /
• 2017

Transplant production in a plant factory with artificial lighting provides several benefits; (1) rapid and uniform transplant production, (2) high production rate per unit area, and (3) production of disease free transplants production. To improve the growth of runner plants when strawberry transplants are produced in a plant factory, we conducted two experiments to investigate (1) the effect of different light intensity for stock and runner plants on the growth of runner plants, and (2) the effect of different container volume for runner plants on their growth. When the stock and runner plants were grown under nine different light conditions composed of three different light intensities (100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPF) for each stock and runner plants, increasing the light intensity for stock plants promoted the growth of runner plants, however, the growth of runner plants was not enhanced by increasing the light intensity for runner plants under same light intensity condition for stock plants. We also cultivated runner plants using plug trays with four different container volumes (21, 34, 73, and 150 mL) for 20 days after placing the stock plants, and found that using plug trays with lager container volume did not enhance the growth of runner plants. These results indicate that providing optimal condition for stock plants, rather than the runner plants, is more important for increasing the growth of the runner plants and that the efficiency of strawberry transplant production in a plant factory can be improved by decreasing light intensity or container volume for runner plants.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.548-559
• /
• 2016

Recent interests in both vehicle emissions and public health have facilitated the development of more eco-friendly transportation systems. This study proposed an integrated simulation approach for evaluating the effectiveness of speed management strategies from the various perspectives including safety, operational efficiency, and environmental compatability. Those simulation methods include driving simulation, traffic flow simulation, emissions simulation, and air dispersion simulation. An essence of the proposed simulation framework is to create the systematic connection of each simulation method toward the evaluation of effectiveness of speed management strategies. As an example, chicane and speed hump in residential area were evaluated by the proposed method. It is expected that the proposed simulation-based approach would be effectively used for the decision-making process in selecting better alternatives considering both safety and public health.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.959-971
• /
• 2007

The three-dimensional eco-hydrodynamic model was applied to estimate the autochthonous COD caused by production of phytoplankton in Jinhae Bay. A residual current was simulated, using a hydrodynamic model, to have a sightly complicated pattern in the inner part of the bay, ranging from 0.001 to 5 cm/s. In the outer part of the bay, the simulated current flowed out to the south sea with a southward flow at a maximum of 25 cm/s. The results of the ecological model simulation of COD levels showed high concentrations, exceeding 4 mg/L, in the inner bay of Masan, an area of wastewater discharge, and lower levels, approaching less than 1 mg/L, closer to the outer part of the bay. The simulation results of Autochthonous COD by two methods using ecological modeling, showed high ratio over 70% of total COD. Therefore, it is more important to consider nutrients than organic matters in the region for control COD standard.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.5-9
• /
• 2013

Recently, eco-friendly sources of energy by fuel cells that use hydrogen as an energy source has emerged as the next generation of energy to solve the problem of environmental issues and exhaustion of energy. A solid oxide fuel cell(SOFC) classified based on the type of ion transfer mediator electrolyte has actively being researched. However, the reliability according to the thermal cycle is low during the operation of the fuel cell, and deformation problem comes from the difference in thermal expansion coefficient between the electrode material, the components made of ceramic material is also brittle, which means disadvantages in terms of the strength. Therefore, in this study, considering the states of the manufacturing and operating of SOFC single cells, the stress analyses in the each of the interfacial layer between the anode, electrolyte and the cathode were performed to get the basic data for reliability assessment of SOFC. The obtained results show that von Mises stress according to the thickness direction on operating state occurred maximum stress value in the electrolyte layer. And also the stresses inside the active area on a distance of 1 ${\mu}m$ from the electrode interface were estimated. Futhermore the evaluation was done for the variation of the stress according to the stage of the operation divided into three stages of manufacturing, stack, and operating.