• 신재생에너지
• /
• 제17권2호
• /
• pp.24-31
• /
• 2021

Renewable energy has become more popular with the increase in the use of solar power. Consequently, the disposal of defective and old solar panels is gradually increasing giving rise to a new problem. Furthermore, the efficiency and power output decreases with aging. Researchers worldwide are engaged in solving this problem by developing eco-module technologies that restore and reuse the solar panels according to the defect types rather than simple disposal. The eco-module technology not only solves the environmental problem, but also has economic advantages, such as extending the module life. Replacement of encapsulants contributes to a major portion of the module maintenance plan, as the degradation of encapsulants accounts for 60% of the problems found in modules over the past years. However, the current International Electrotechnical Commission (IEC) standard testing was designed for the commercialization of solar modules. As the problem caused by long-term use is not considered, this method is not suitable for the quality assurance evaluation of the eco-module. Therefore, to design a new accelerated test, this paper provides an overview of EVA degradation and comparison with the IEC and accelerated tests.

• 한국실내디자인학회논문집
• /
• 제24권5호
• /
• pp.62-69
• /
• 2015

The purpose of this research is to analyze the methods of the decorations using module plants in interior spaces. This research produced 18 types of the module plant decoration: considering the classifications of module plants(soil, hydroculture, moss), directions of module plants (up, side, down), assembling ways of module plants (horizontal, vertical). Applying these 18 types to the interior space decoration (floor stand, wall attach, ceiling hanging), 54 types were classified. After that, 150 cases of the decoration using module plants in interior spaces were collected and analyzed. In result, the cases were belong to 25 types of 54 types. The important types were the types to be able to decorate wide area of walls or ceilings without occupying floor area: SOIL-UP-VERTICAL, HYDROCULTURE-UP-VERTICAL, MOSS-SIDE-VERTICAL. These types were the decorations with function of bio-filter for air cleaning. Special types were SOIL-SIDE-HORIZONTAL, SOIL-SIDE-VERTICAL with soil developed not to pour and SOIL-DOWN-HORIZONTAL, SOIL-DOWN-VERTICAL with lucks not to pour soil. Plants will be used widely in interior design because of the awareness of eco-friendly design. The strength that module plants are portable, changable, able to exchange parts helps users to maintain plants in interior spaces. For designers, module plants are flexible materials in order to make variety of forms to adjust to interior spaces. The results of this research about methods of the decorations using module plants in interior spaces are useful to designers who want to design interior spaces eco-friendly and user-friendly.

• 대한산업공학회지
• /
• 제34권1호
• /
• pp.79-89
• /
• 2008

An end-of-life strategy is concerned with how to disassemble a product and what to do with each of the resultingdisassembled parts. A sound understanding of the end-of-life strategy at the early design stage could improve theease of disassembly and recycling in an efficient and effective manner. Therefore, the end-of-life decisionmaking for environmental conscious design has become a great concern to product manufacturers.We introduce a novel concept ofeco-architecture which represents a scheme by which the physical componentsare allocated to end-of-life modules. An end-of-life module is a physical chunk of connected components or afeasible subassembly which can be simultaneously processed by the same end-of-life option without furtherdisassembly. In this paper, a method for analyzing the eco-architecture of a product at the configuration designstage is proposed. It produces an optimal eco-architecture under the given environmental regulations. To dealwith the case ofa complex product, the method is extended for analyzing hierarchical eco-architecture.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.474-479
• /
• 2016

친환경에너지에 대한 요구가 높아지면서 전기에너지의 사용은 계속 증가하고 있다. 최근 친환경, 에너지 절약을 위해서 유도가열을 이용한 여러 가지 가열방식에 대한 관심이 높아지고 있다. 본 논문에서는 전자유도현상을 이용한 유도가 열방식을 이용하여 보다 친환경적이고 에너지 절약이 가능한 전기온풍기를 설게 제작하였다. 온풍기는 송풍부, 유도가열부 및 전력변환부 등 3부분으로 구성하였다. 유도가열부는 송풍부에 결합되어 송풍부로부터 발생된 바람이 가열되어 분출되며, 전력변환부는 고주파를 인가하여 자속을 발생시킴으로써 유도가열부의 내부를 가열시킨다. 발열방식은 유도가열의 원리를 적용하고, 전력변환효율성을 높이기 위해 공진형 인버터를 사용하였다. 공진형 인버터는 풀브리지 전압형 직렬부하 공진형 인버터를 사용하였다. 유도가열부는 세라믹 계열의 절연체와 SUS40계열의 금속체를 사용했으며, 전력변환부는 정류부, 필터부 및 공진형 인버터부 등으로 구성 하였다. 본 연구에서 제안한 전기온풍기는 기존의 전기히터와 가스히터 등과 비교한 결과, 온도 상승속도가 빠르고, 사용에너지 비용이 절감되는 등 경제성도 있음을 보였다. 개발된 전기온풍기는 가정용, 상업용 및 농업용 등 여러 분야에 친환경 에너지절감형 온풍기로의 적용 가능성이 있다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.115-121
• /
• 2013

A number of urban renewal projects are currently being implemented around the world. Current project management tools are limited in effectively dealing with numerous issues regarding management of these projects (e.g., simultaneous execution of multiple projects). As an effort to address this deficiency, an Intelligent Program Management Information System (i-PgMIS) was developed for effective management of urban renewal projects. The i-PgMIS is a web-based system consisting of various modules including cost management, schedule management, risk management, change management, eco-value engineering (EVE) and so on. Based on the recognition of increasing awareness of creating sustainable built environment, this paper focuses on the EVE module that can support eco-value analysis at program-level management. The EVE module is expected to enhance value and sustainability of construction processes throughout the whole 'program' lifecycle and further to support program feasibility study based on life cycle costing.

• 한국환경과학회지
• /
• 제27권7호
• /
• pp.531-541
• /
• 2018

Road freezing caused by snowfall during wintertime causes traffic congestion and many accidents. To prevent such problems, we developed, in this study, a system to predict road freezing based on weather forecast data and the freezing generation modules. The weather forecast data were obtained from a high-resolution model with 1 km resolution for Jeju Island from 00:00 KST on December 1, 2017, to 23:00 KST on February 28, 2018. The results of the weather forecast data show that index of agreement (IOA) temperature was higher than 0.85 at all points, and that for wind speed was higher than 0.7 except in Seogwipo city. In order to evaluate the results of the freezing predictions, we used model evaluation metrics obtained from a confusion matrix. These metrics revealed that, the Imacho module showed good performance in precision and accuracy and that the Karlsson module showed good performance in specificity and FP rate. In particular, Cohen's kappa value was shown to be excellent for both modules, demonstrating that the algorithm is reliable. The superiority of both the modules shows that the new system can prevent traffic problems related to road freezing in the Jeju area during wintertime.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.105-106
• /
• 2008

In korea, PV business has been growing fast since 2000. There are many ways to build PV System. Among them, BIPV(Building Integrated Photovoltaic) System using PV Modules as external wall has been carried out research on and invested much. Thus I will suggest another way to apply the BIPV System. This System is Eco System designed to consume little energy working the blind by the power that the BIPV System generates. I will show you how to make and apply this BIPV System.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.281-291
• /
• 2022

Global warming is accelerating due to the use of fossil fuels that have been used continuously for centuries. Now, humankind recognizes its seriousness, and is conducting research on searching for eco-friendly and sustainable energy. In the field of solar energy, which is a kind of eco-friendly and sustainable, many studies are being conducted to enhance the output performance of the module. In this study, the output improvement for the shingled module structure was studied. In order to improve the output performance of the module, the thickness of the encapsulant was increased, and the lamination process conditions have been improved accordingly. After that, the crosslinking rate was analyzed, and the suitability of the lamination process conditions was judged using this. In addition, a peeling test was conducted to analyze the correlation between the adhesion of the encapsulant and the output performance of the module. Finally, the optimization for the encapsulant material and the lamination process conditions for high-power shingled modules was established, and accordingly, the market share of high-power shingled modules in the solar module market can be expected to rise.

• 한국수자원학회논문집
• /
• 제54권9호
• /
• pp.681-692
• /
• 2021

식생 프로세스는 증발산 제어를 통해 강우 유출 프로세스에 상당한 영향을 미치지만, 개념적인 집중형 수문 모형에서는 거의 고려되지 않는다. 본 연구는 인공위성에서 원격으로 감지된 엽면적지수 자료를 표현하는 생태 모듈을 수문 분할 모듈에 통합하여 합천댐 유역에 대한 모형 성능을 평가하였다. 제안된 생태 수문 모형은 습윤 지역의 생태수문 프로세스를 더 잘 표현하기 위하여 크게 세 가지 주요한 특징을 가진다. 1) 식생의 성장률은 유역의 물 부족 스트레스에 의해 제약을 받는다. 2) 식생의 최대 성장은 유역 기후에 의한 에너지에 의해 제약을 받는다. 3) 식생과 대수층의 상호작용이 반영된다. 제안된 모형은 유역 단위의 수문 성분과 식생 동역학을 동시에 모의한다. SCEM 알고리즘에 의해 추정된 모형 매개변수를 이용한 검증 결과로부터 아래와 같은 발견할 수 있었다. 1) 엽면적지수와 하천유량 자료를 이용하여 생태수문모형의 매개변수를 추정하는 것이 생태 모듈이 없는 수문 모형과 비슷한 정확도 및 견고함으로 하천유량을 예측할 수 있다. 2) 필터링이 안된 원격으로 감지된 엽면적지수를 그대로 입력자료로 이용하는 것은 하천유량 예측에 도움이 안된다. 3) 통합된 생태수문모형은 엽면적지수의 계절적인 변동성에 대한 우수한 추정치를 제공할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.122-127
• /
• 2011

Recently eco friendly energy is the most interested field and has been research actively. MCFC is a representative technology of eco friendly energy. Eco friendly energy shouldn't cause environmental problems like noise and vibration because that is the technology to solve environmental problems. The major noise and vibration source of MCFC is blowers. this project designed sound enclosure and isolator as the best way for blowers.