• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1182-1188
• /
• 2005

In this paper, various power delay profiles (PDP) are simulated to study the influence of the PDP shape on the bit error rate (BER) performance of Orthogonal Frequency Division Multiplexing (OFDM) communication systems. Assuming Rayleigh fading with 16-QAM modulation scheme, the simulation focuses on the investigation of the various shapes of the PDP which are often characterized by peaks, slope, attenuation and distance of an echo profile of waves. This yields information about the properties of the channel, and can be applied to decide the performance of the systems according to the channel.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.98.6-98
• /
• 2001

In the double-talk situation where both the near-end and far-end signal present, the performance of echo cancellation using the conventional LMS algorithm is easily degraded because it freezes the adaptation in this situation. Recently CLMS and ECLMS algorithms were proposed to solve this problem. These algorithms could be used to adapt the filter´s parameters continuously even in the double-talk situation. In this paper, we propose new recursion formulas to calculate the ECLMS algorithm. And we compare and analyze the performances of double-talk echo canceller according to changing the value of channel tracking factors ${\alpha}$, ${\beta}$ and forgetting factor λ. The computer simulation was performed and the results showed that, ...

• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.22-29
• /
• 2006

This paper proposes an efficient array beamforming method using spatial matched filtering for ultrasound imaging. In the proposed method, ultrasound waves are transmitted from an array subaperture with fixed transmit focus as in conventional array imaging. At receive, radio frequency (RF) echo signals from each receive channel are passed through a spatial matched filter that is constructed based on the system transmit-receive spatial impulse response. The filtered echo signals are then summed. The filter remaps and spatially registers the acoustic energy from each element so that the pulse-echo impulse response of the summed output is focused with acceptably low side lobes. Analytical beam pattern analysis and simulation results using a linear array show that the proposed spatial filtering method can provide more improved spatial resolution and contrast-to-noise ratio (CNR) compared with conventional dynamic receive focusing (DRF) method by implementing two-way dynamically focused beam pattern throughout the field.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.604-610
• /
• 2000

A stereo acoustic echo canceller has significant cross-correlation between each channel signal. As the result, the adaptive filter coefficient that estimates the acoustic echo path of a receiving room can misconverge to the path or converge slowly. In this paper, a new preprocessor using absolute difference in stereo signals is proposed to reduce cross-correlations and to improve the removal efficiency of the stereo acoustic echo. Compared to the previous preprocessor using a half wave rectifier, the newly proposed preprocessor showed better performance according to computer simulation. In addition, when the paths of transmitting room were changed the performance of the proposed preprocessor was not degraded.

• Korean Journal of Digital Imaging in Medicine
• /
• v.15 no.2
• /
• pp.55-61
• /
• 2013

The purpose of this study is to evaluate image blurring according to variation of the ETL and propose the clinically appropriate ETL range. SIEMENS MAGNETOM Skyra 3.0T and 20 channel head coil were used for the study. MRI phantom was kept the lines horizontally to three direction(X,Y,Z) of the coil and T1, T2 weighted images that used the fast spin echo technique acquired. The ETL with increase of 10 was applied from 10 to 80. In addition, the ETL with increase of 1 was applied in the interval statistically significant differences occurred. And T1, T2 weighted images that used the conventional spin echo technique acquired to compare image blurring of the images that used the fast spin echo technique. The slope of lattice in the images was measured using Image J 1.47v program to evaluate image blurring. And image blurring was determined by the degree of the slope. The statistical significance of both techniques was evaluated by the Kruskal-Wallis test of the SPSS 17.0v. And the correlation of the ETL and image blurring was evaluated quantitatively by regression analysis. The slope of the T1, T2 weighted images that used fast spin echo technique decreased as contrasted with conventional spin echo technique. In the result of the Kruskal-Wallis test, the T1, T2 weighted images that used fast spin echo technique made a significant difference with conventional spin echo technique. Particularly, in the Tomhane' T2 test, the T1, T2 weighted images made a significant difference from ETL 22 and 31 respectively. In the result of the regression analysis, the R-squared of the T1, T2 weighted images are 0.762 and 0.793. It is difficult to apply the long ETL in the T1 weighted image caused by the short TR and multi-slices study. Therefore, clinical impact according to variation of the ETL is very slight in the T1 weighted images. But the application of the proper ETL is demanded in T2 weighted images using the fast spin echo technique in order to prevent image blurring.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.59-66
• /
• 2021

Humans mainly recognize surrounding objects using visual and auditory information among the five senses (sight, hearing, smell, touch, taste). Major research related to the latest object recognition mainly focuses on analysis using image sensor information. In this paper, after emitting various chirp audio signals into the observation space, collecting echoes through a 2-channel receiving sensor, converting them into spectral images, an object recognition experiment in 3D space was conducted using an image learning algorithm based on deep learning. Through this experiment, the experiment was conducted in a situation where there is noise and echo generated in a general indoor environment, not in the ideal condition of an anechoic room, and the object recognition through echo was able to estimate the position of the object with 83% accuracy. In addition, it was possible to obtain visual information through sound through learning of 3D sound by mapping the inference result to the observation space and the 3D sound spatial signal and outputting it as sound. This means that the use of various echo information along with image information is required for object recognition research, and it is thought that this technology can be used for augmented reality through 3D sound.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.57-62
• /
• 1997

Two psychoacoustic models used in MPEG-1 employ different masking patterns, different masking indexes, and different computational procedures. As a result, Model 1 is inferior to Model 2 due to its worst case approach in computing the SMR even though it determines tonality and masking levels accurately. In this study, we investigate the performances of psychoacoustic models when we modify the MPEG-1 audio coder for variable bitrates. Simulation results show that Model 2 has a gain of 30 kbps in the dual channel mode and 20 kbps in the joint stereo mode. It is generally known that the joint stereo mode has a gain in bitrate compare to the dual channel mode. For signals with frequent attacks, this gain becomes larger in Model 1 than in Model 2. This is due to the fact that Model 1 uses the worst case approach in computing the SMR to reduce pre-echo

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.301-309
• /
• 2022

Protective coatings are most widely used anticorrosive structures for steel structures. The corrosion under the coating damages the host material, but this damage is completely hidden. Therefore, a field-applicable under-coating-corrosion visualization method has been desired for a long time. Laser ultrasonic technology has been studied in various fields as an in situ nondestructive inspection method. In this study, a comparative analysis was carried out between a guided-wave ultrasonic propagation imager (UPI) and pulse-echo UPI, which have the potential to be used in the field of under-coating-corrosion management. Both guided-wave UPI and pulse-echo UPI were able to successfully visualize the corrosion. Regarding the field application, the guided-wave UPI performing Q-switch laser scanning and piezoelectric sensing by magnetic attachment exhibited advantages owing to the larger distance and incident angle in the laser measurement than those of the pulse-echo UPI. Regarding the corrosion visualization methods, the combination of adjacent wave subtraction and variable time window amplitude mapping (VTWAM) provided acceptable results for the guided-wave UPI, while VTWAM was sufficient for the pule-echo UPI. In addition, the capability of multiple sensing in a single channel of the guided-wave UPI could improve the field applicability as well as the relatively smaller size of the system. Thus, we propose a guided-wave UPI as a tool for under-coating-corrosion management.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.496-503
• /
• 2013

In an orthogonal frequency division multiplexing system, conventional interpolation techniques cannot correctly balance performance and overhead when estimating dynamic long-delay channels in single frequency networks (SFNs). In this study, classical filter analysis and design methods are employed to derive a complex interpolator for maximizing the resistible echo delay in a channel estimator on the basis of the correlation between frequency domain interpolating and time domain windowing. The coefficient computation of the complex interpolator requires a key parameter, i.e., channel length, which is obtained in the frequency domain with a tentative estimation scheme having low implementation complexity. The proposed complex adaptive interpolator is verified in a simulated digital video broadcasting for terrestrial/handheld receiver. The simulation results indicate that the designed channel estimator can not only handle SFN echoes with more than $200{\mu}s$ delay but also achieve a bit-error rate performance close to the optimum minimum mean square error method, which significantly outperforms conventional channel estimation methods, while preserving a low implementation cost in a short-delay channel.