• 한국CDE학회논문집
• /
• 제14권1호
• /
• pp.33-41
• /
• 2009

Triangular mesh models are widely used in reverse engineering, computer graphics, rapid prototyping and NC(numerical controller) tool-path generation. Triangular mesh models are generated from point clouds, surface models and solid models. A halfedge-based triangular mesh data structure is proposed and the development considerations are presented. In the presented data structure, halfedge is the key data structure. Halfedge stores its triangle index and the order in the triangle. Triangles do not store the halfedge lists explicitly. Halfedge is referred by value and defined when it is required. Proposed data structure supports four design requirements: efficient rendering, compact memory, supporting efficient algorithms and easy programming.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1396-1403
• /
• 2011

It is not easy to analyze the strong nonlinear time series and effectively design a good prediction system especially due to the difficulties in handling the potential uncertainty included in data and prediction method. To solve this problem, a new design method for fuzzy prediction system is suggested in this paper. The proposed method contains the followings as major parts ; the first-order difference detection to extract the stable information from the nonlinear characteristics of time series, the fuzzy rule generation based on the hierarchically classifying clustering technique to reduce incorrectness of the system parameter identification, and the IT2TSK fuzzy logic system to reasonably handle the potential uncertainty of the series. In addition, the design of the multiple predictors is considered to reflect sufficiently the diverse characteristics concealed in the series. Finally, computer simulations are performed to verify the performance and the effectiveness of the proposed prediction system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.296-298
• /
• 1993

In this paper, a new design procedure is proposed for constructing the observer for linear discrete-time systems with unknown inputs. An existence condition for the suggested observer is also presented. The observer design procedure does not use any transformation technique, augmentation technique and has a clear physical meaning, so it is easy to understand and to design the observer. It directly estimates the unknown inputs from that outputs only, so it is different from other pre-works in which the reconstruction of the unknown inputs arc performed with the additional output derivatives.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.150-155
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• 연구논문집
• /
• 통권22호
• /
• pp.5-19
• /
• 1992

An aerodynamic design technique of a centrifugal impeller is developed. The design procedure consists of a preliminary design, a three-dimensional blade surface generation, a flow analysis of impeller passage and a compatibility analysis for the designed impeller. To get a higher efficiency, the backswept impeller which has a lean angle and a parabolic blade surface is designed. In the present analysis of flow in an impeller, an inviscid quasi-three-dimensional method and a viscous three-dimensional method are used. Compatibility of the designed impeller is decided with the results of the analyses. The quasi-three-dimensional method is easy to use, but limited to a few conditions in real application for the prediction of the actual flow in the impeller. Since the viscous three-dimensional method proved to predict the real flow in the impeller relatively well, it can be used as a means for the decision of compatibility of the designed impeller.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.782-794
• /
• 2006

Classical finite element programs are not well suited to the design of composite structures, because they are primarily analysis tools and need much time for the data input and as well as for the interpretation of the results. The aim of this paper is to develop a program which allows very fast analyses and reanalyses for design process, thanks to a fast reanalysis method with changes of data and conditions. Speed in the analysis Is obtained by simplification of the analysed structure and limitations in its geometrical generality and improvements in numerical methods. The use of the program is made easy with interactive user-friendly facilities.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.108-118
• /
• 2006

Reusing is one of the most environmentally friendly recycling methods. For the economical remanufacturing of used cellular phone, the cellular phones should be design for easy disassembly. In this paper, we analyzed the components and connecting elements of cellular phones and developed a guideline for the design of the cellular phones. A software for the disassembly assessment was also developed. Redesigned cellular phone by the developed guideline and its original phone was analyzed by the disassembly assessment software. Disassembly time could be reduced about 40% and reusing rate could be improved about 37%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.657-660
• /
• 2005

It is net easy to predict the shrinkage rate of a plastic injection mold in its design process. The shrinkage rate should be considered as one of the important performances to produce the reliable products. The shrinkage rate can be determined by suing the CAE tools in the design produces. However, since the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. Therefore this study was carried out to presume for mutual relation of analysis condition to get the optimum average shrinkage by regression analysis. The results shown that coefficient of determination of regression equation has a fine reliability over 88.3% and regression equation of average shrinkage is made by regression analysis.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.139-143
• /
• 2001

본 연구는 사출성형에서의 리브설계를 합리적으로 수행하기 위한 방법론과 프로그램에 관한 것이다. 리브는 몰드금형에 있어서 복잡한 코아와 캐비티 형상을 초래하게 되는 원인이 된다. 리브는 조림, 보강, 유동성 중대 등의 목적으로 사용되며 이를 적절하게 설계하기 위해서는 고분자 재료 물성, 사출성형공정에서의 열기계적 변화, 성형성 등 많은 지식을 필요로 한다. 이러한 리브의 설계를 합리적으로 수행하기 위한 프로그램 제작에 관한 사항을 논의하였다.

• Computers and Concrete
• /
• 제10권1호
• /
• pp.19-33
• /
• 2012

The performance of a concrete is significantly influenced by its mixture proportion and the coating thickness on aggregate surface. The concrete in this study is designed by estimating the blending ratio of aggregate using a densified mixture design algorithm (DMDA) based on an ideal grading curve and estimating the paste volume as the sum of the amount of paste needed to provide an assigned coating paste thickness. So as to obtain appropriate concrete amount, and thus can accurately estimate the property of concrete. Deduction of this mix design formula is simple and easy understanding, and meanwhile to obtain result is fast. This estimation model of mix design is expected to reward to industry and effectively upgrade concrete quality.