• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• Korean Journal of Human Ecology
• /
• v.18 no.3
• /
• pp.729-740
• /
• 2009

This study is to research on the rate of expansion or contraction according to movement of the lower body of the man their twenties using Rapid Form software. And aim of this study is to get information of ease allowance in developing slacks pattern using 3D body surface scan data through comparison with existing slacks patterns. Considering on the contraction and expansion according to movement, it need to set the more ease allowance in hip circumference than waist circumference, and the more ease allowance in back hip width than front hip width in slacks. In crotch length, the length of front crotch is revealed contraction but the length of back crotch is revealed expansion. It is desirable lowering front waist line and raising back waist line to possess ease allowance in back crotch area. The length of side seam is revealed a little expansion but the length of inseam is showed a great expansion. To develop slacks pattern of scientific approach using 3D body surface scan data, it need to analysis the rate of expansion and contraction of the lower body based on the movement, shear deformation, slip in fabrics and skin, or in fabrics and fabrics, and slip down from waist line.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.684-688
• /
• 1993

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.45-59
• /
• 2016

This research is a study to develop basic block patterns for adult males. The subjects were 20 men in their 20s, and we tested 6 basic bodice blocks that are used in academia and industry. First, a comparative analysis of the patterns of the bodice blocks was conducted and the test garments were made, and then their appearances were evaluated during wearing tests. Based on the test results, we intended to select a bodice block that is a good fit when it is put on and to use it as basic data in order to design a man's bodice block for the future. The research results are as follows: First, a comparison of the 6 bodice block drafts showed that they used differently calculated ease allowances at chest circumference and width, waist circumference, shoulder length, etc. for which the upper chest circumference is used as a reference. Second, when the appearances of the test garments were tested, the average scores were high in the order of B> H> P> K> M> L. Pattern B was superior in the areas of the neck circumference and shape, ease allowance at the back of the neck, circumference of the front of the neck, location of side width, ease allowance at sides, armhole width and depth. But in the other test items, there were cases where other patterns were superior.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.1
• /
• pp.51-64
• /
• 2019

This study provides basic information for the convenient size selection of shirts in the online purchasing environment. The preferred shirt fit was compared according to body size group. The subjects were 111 students majoring in clothing. After setting a virtual model with her own body sizes, subjects chose the best preferred fit among four sizes shirts which included the shirt suitable to her bust circumference, one size smaller shirt, one size larger shirt, and a two size larger shirt. They generally preferred the original size, but the preferred shirt fit was different by the body characteristics such as stature, waist height, or the ratio of Biacromion and drop. Shirt length was affected by stature and sleeve length was affected by waist height. The shoulder ease was mostly affected by the ratio of the shoulder length. Waist fit and hip fit were influenced by waist and hip. Therefore, the body parts affecting the preferred fit of each shirt part were different and the effect of body shape was stronger than body size.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.586-606
• /
• 2023

This study initiated research aligned with the body positivity movement, aiming to explore size diversity for groups facing relative size discrimination due to their deviation from average body types. Using KS adult women's apparel dimensions as a reference, jackets were developed for women in their 20s to 30s who belong to the small petite-size (S[P]) category, which is characterized by a height under 155cm (petite) and a bust-circumference from 72cm to less than 82cm (small). Using 3D virtual-fitting, we conducted experiment-pattern production and refinement and subsequent real-fitting evaluations by participants to objectively validate aesthetics and comfort. The study's findings are as follows: First, utilizing a 3D virtual-fitting program by identifying 'creases' and 'garment pressure points' in the jacket appearance, experiment patterns were refined and real jackets were produced. This approach addressed challenges in recruiting participants with specific body types and allowed for efficient research in terms of cost and time. Second, through real-fitting evaluations, basic-fit and slim-fit jackets labeled as <79-88-150> were developed for the S(P) size. we presented 'size spec' and 'ease allowance' for jackets by waist fit. Both fits received positive evaluations with approximately 53.5cm sleeve length, and 11.7cm shoulder length. The ease allowances for the basic-fit jacket were approximately 9.2cm at the bust circumference, 12.8cm at the waist circumference, and 6cm at the hip circumference. Similarly, the slim-fit jacket exhibited ease allowances of about 4.8cm at the bust circumference, 4cm at the waist circumference, and 4cm at the hip circumference, receiving positive evaluations for aesthetics and comfort.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.336-345
• /
• 2019

This study evaluated the preference and wearing characteristics of existing fitness compression wear for elderly women and identified the problems and improvements of existing fitness apparel. Preference and wearing characteristics for 6 types (A-F) of upper and lower fitness compression wear were evaluated. Photos and drawings as well as the preferred designs and details were investigated after presenting the evaluation clothing. Evaluations were made on a 5 point Likert scale for the fitness, allowance, pressure, ease of movement, fabric material, and overall satisfaction after wearing. The design preference indicated that B type (26.6%) and C type (23.4%) were preferred in the top with C, E and F type preferred to the same ratio of 19.4% in the slacks. The fitness and allowance amount of the top B type were the most appropriate (${\geq}4$), the C type was in close contact (2.86), and the F type was inadequate in the neck circumference (1.77). The feeling of pressure was high in the waist, abdomen, thighs, and knees. The area where the elderly people want to improve their strength was the legs; in addition, a pattern design was needed to strengthen leg muscles when designing fitness compression wear. However, a design with excessive adhesion due to a muscle support band was shown to be not preferred. Therefore, depending on the activity, it is necessary to develop a fitness compression wear that applies an optimum stretching ratio of fabric based on body surface area changes.

• Journal of the Korean Society of School Health
• /
• v.7 no.1
• /
• pp.9-28
• /
• 1994

This study is to investigate the status and problems in the anual physical examination in elementary & secondary schools. The study helps the introduction of health assessment. Two hundreds and forty nurse teachers of elementary & seconcary school in Seoul received in-service traomong fpr 20 daus frp, September 7 to September 27, 1992. Questionnaires were given to the 240 teachers and the number of collected questionnaire is 112. The result of the questionnaire analysis is like the following. First, the answered teachers aged 35~39, 36.6%; experience 6~10 years 37.5%; the number of class 31~40, 28.6%. Among the answered of the school doctors is practicioners. The doctors major subjects are 26.8% of internal medicine and 35.7% of surgery. Second, in elementary & secondary school nurse teachers received in-service training for the primary health assessment. And then 37.5% of schools practiced the health assessment. The term of the health assessment is largely a-year-length, occurately its rate of schools have practiced the assessment reaches 81.0%. The number of health assessment are consist of eyes, nose, ear, throat, skin, spine, heart and other abnormal regions and diseases all over the body. And 83.3% of the rate of the health assessment includes all these contents. The period of the health assessment is 7 to 28 days. Third, the physical examination conducted by school doctors is 91.0%. The method is various; one is 56.6% of the students who checked first by he nurse teacher. The number of 15.1% of the schools is directly checked by the school doctor. The invited medical doctors are divided into two categories. The number of general physician is 61.9%. Contrary to that school doctors are 38.1%. The contents of the medical examination is all the items printed on the medical examination sheet. To follow the medical examination sheet the number of school is 59.6%. Eyes, throat, skin and heart etc. partly medical examination is 40.4%. The rate of schools that used only stethoscope, tongue pressor as the medical instruments reaches 53.4% and 87.1% of elementary & secondary school give the invited doctors the allowance a nurse teachers conference decided. The number of 8.9% schools pay the doctors independent allowance. The medical examomatopm allowance is 200 to 250 won per capita. The rate is 56.1%. Forth, after the medical examination 72.1% of school sends letter to the parents to notice the result of the examination. The number of response from parent is 12.5%. The observation record in secondary school is 70.6% for junior, and 80.0% for senior respectively, and 65.5% is for the elementary school children. To conclude the regular physical examination in elementary & secondary school is very important. Because the students are in the stage of rapid growth and development. Early finding of the students diseases can help to cure with ease. In the light of public health the management of health program in the elementary & secondary school is of consequence.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.151-163
• /
• 1981

This study was to investigate the changes of shape of the surface square measurements, the rate, measurements of expansion and contraction and correlation. In this study was found the following: 1. According to the developmental illustration of the shell it was revealed that there was a great change in the thigh area of the body. When the leg was raised and the waist bent forward the front sections of the abdomen were contracted and the center back of the hip was expanded. 2. It was found that the contraction was present in the girth of the back section and front section was expanded in the rate of the body surface. In the length from the middle waist to hip the front area showed a great deal of contraction the back area of the hip & thigh revealed a great deal of expansion. 3. By the somatometry, the measurements of the expansion and contraction of the body surface, there was a great change in waist and hip. It revealed that the maximum expansions of waist and hip line in the chair were 1.8cm and 4.08cm respectively. Therefor, when slacks are made at least the amount of ease of 1.8cm of waist line and 4cm of hip line must be made and the allowance of the center back of hip area must be made. 4. It revealed that there was a correlation between waist and hip girth.