• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.9-20
• /
• 2015

A strainmeter goes through a period of instability immediately after installation. To determine the stability of strainmeters installed around the Andong fault zone, South Korea, an x-MR control chart analysis and a T² control chart analysis were conducted. The x-MR control chart analysis used an empirically determined 3σ control limit line to identify abnormal data in recently installed strain gauges. In the T² control chart analysis, the control limit line was set at a confidence of 95%. A comparison of the early stage of measurement with the terminal stage of measurement for three months after installation indicates that stabilization depends on the location and direction of each strain gauge in x-MR control chart analysis. In the T² control chart analysis, the number of values exceeding the control limit line decreased as the terminal stage was approached. Based on these results, it is suggested that the 3σ control limit line of an x-MR control chart can be used as a standard for single gauge stability, and that the 95% confidence limit of a T² control chart analysis could be used as the standard for the stability of multi-gauge strainmeters.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.503-510
• /
• 2016

In recent years, owing to the growing user demand for the two-way internet service based on the move global broadband communications, a new type of satellite terminal has developed, known as earth station in motion (ESIM). This service was required by Resolution 158 (WRC-15) to study on the coexistence with the co-primary fixed service (FS) in 27.5-29.5 GHz as a FSS uplink. In this paper, four scenarios was introduced to account for the antenna pointing error and the azimuth for an analysis on the sharing between ESIM and FS. From analysis results, the required separation distance between two systems should be about 32~52 km according to the elevation angles of $20^{\circ}{\sim}40^{\circ}$ using thresholds of 5% and 10% outage probability. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the pointing error of ESIM to minimize the required separation distance and to protect the co-primary FS.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.428-434
• /
• 2017

In recent years, owing to the growing user demand for the two-way internet service based on the mobile global broadband communications, a new type of satellite terminal has been developed, known as ESIM(Earth Station in Motion). This service was required by Resolution 158(WRC-15) to study on the coexistence with the co-primary FS(Fixed Service) in 27.5-29.5 GHz as a FSS(Fixed Satellite Service) uplink. In this paper, the average received power on ESIM within -10 dB of beam width of FS and its outage probability was analyzed theoretically and also simulated to account for the azimuth angle with uniform distribution. From the results, it can be concluded that this theoretical analysis is very useful to analyze the interference from ESIM into FS based on the statistical and probabilistic method. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the inclination angle of moving path, the operation hours, and the speed of ESIM to protect the co-primary FS.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.1-15
• /
• 2020

Monitoring and assessing terminal electron accepting processes (TEAPs) are one of the most important steps to remediate contaminated sites via various in-situ techniques. TEAPs are a part of the microbial respiration reactions. Microorganisms gain energy from these reactions and reduces pollutants. Monitoring TEAPs enables us to predict degradability of contaminants and degradation rates. In many countries, TEAPs have been used for characterization of field sites and management of groundwater wells. For instance, US Environmental Protection Agency (EPA) provided strategies for groundwater quality and well management by applying TEAPs monitoring. Denmark has also constructed TEAPs map of local unit area to develop effective groundwater managing system, particularly to predict and assess nitrogen contamination. In case of Korea, although detailed soil survey and groundwater contamination assessment have been employed, site investigation guidelines using TEAPs have not been established yet. To better define TEAPs in subsurface environments, multiple indicators including ion concentrations, isotope compositions and contaminant degradation byproducts must be assessed. Furthermore, dissolved hydrogen concentrations are regarded as significant evidence of TEAPs occurring in subsurface environment. This review study introduces optimal sampling techniques of groundwater and dissolved hydrogen, and further discuss how to assess TEAPs in contaminated subsurface environments according to several contamination scenarios.

• Journal of The Korean Astronomical Society
• /
• v.26 no.1
• /
• pp.1-12
• /
• 1993

In order to explore the time dependence of the closure parameters of the two-fluid calculations for supernova remnants and the terminal shocks of stellar winds, we have considered a simple model in which the time evolution of the cosmic-ray distribution function was followed in the test-particle limit using the Bohm diffusion model. The particles are mostly accelerated to relativistic energy either in the free expansion phase of the SNRs or in the early phase of the stellar winds, so the evolution of the closure parameters during these early stages is substantial and should be followed correctly. We have also calculated the maximum momentum which is limited by either the age or the curvature of these spherical shocks. We found that SNRs expanding into the medium where the gas density decreases with the distance from the explosion center might be necessary to explain the observed power-law distribution of the galactic cosmic rays. The energy loss due to the escaping energetic particles has been estimated for the terminal shocks of the stellar winds.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.85-93
• /
• 2012

In this paper, I designed the satellite system, using the MF-TDMA (Multi Frequency-Time Division Multiple Access) DAMA (Demand-Assigned Multiple Access) method, that allocates the satellite resources more effectively to prevent a large quantity data discard when Earth Terminals (ETs) request their satellite network resource to Network Controller (NC) by using their history information, such as traffic pattern or traffic class which have been receiving, and the network controller allocates the satellite network resource and send to earth terminals by using his history information that earth terminals have been requested already. The U.S. Military Warfighter Information Network-Tactical (WIN-T) community has selected the L-3 Linkabit MF-TDMA DAMA Network Centric Waveform (NCW) as the networking standard for full-mesh IP over SHF satellite communications. In the MF-TDMA DAMA satellite network, network controller allocates the satellite network resources and enables maximum 255 earth terminals to communicate each other for periodic satellite network resource requests of earth terminals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.444-451
• /
• 2007

The design parameters of transmitter and receiver channel systems for COMS, which provides meteorological and ocean data services, were analyzed and the channel design parameters for a proper design of a small user-terminal were proposed in this paper. The COMS transmits the oceanic observation data by using the S/L-band link to the earth station. The meteorological data also are transmitted to the earth station, the meteorological data services, which are processed in the earth station, are provided to user. The sensor data are transmitted as digital signal type and are received by bilateral small-sized user terminals. So the optimal channel system for transmission and reception of sensor data should be designed on the basis of the channel modeling and analyzed results for primary technologies.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.72-80
• /
• 2020

This paper describes the design and fabrication of a BUC(Block Up-converter) which is a component of a FST (Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. BUC is physically composed of an up-converter module, a high power amplifier module, a receive band suppression filter, a housing, and a cable assembly. It was designed using simulator AWR to satisfy the electrical characteristics of BUC's such as maximum output power, gain, unwanted signal, and intermodulation. The maximum output power and gain characteristics were measured at 43.4dBm and 51.8dB, respectively. The unwanted wave and intermodulation characteristics were -73.5dBc and -31.9dBc, respectively. Of the electrical requirements of Table 1, not only the above four but also all of the items were confirmed to be satisfied.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2020

This paper describes the design and fabrication of a LNB(Low Noise Block downd-converter) which is a component of a FST(Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. LNB is physically composed of an down-converter module, a low noise amplifier module, a transmit band suppression filter, a isolator, a housing, and a cable assembly. It was designed using simulator (AWR) to satisfy the electrical characteristics of LNB's such as gain, noise figure and unwanted signal. The gain and noise figure characteristics were measured at 61.4dBm and 1.37dB, respectively. The unwanted wave was measured at -66.79dBc. Of the electrical requirements of Table 1, not only the above three but also all other items were confirmed to be satisfied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1341-1347
• /
• 2000

For the DRT satellite transponder system, BER and total SNR to be required in the earth terminal are evaluated under the condition of HPA nonlinearity in the FBJ(full-band jamming) or PBJ(partial-band jamming) of uplink and downlink. In case that the satellite Inter bandwidth( Ws) is same to the earth terminal bandwidth($W_r$),in conditions of uplink JSR 10[dB], downlink JSR 10[dB] and processing gain 30[dB], linear transponder system shows that uplink SNR needs to be 14.2[dB] to achieve the total SNR 10[dB] requirement in downlink SNR 14[dB]. However, Nonlinear transponder system with OBO(output backoff) 2[dB] requires 20.1 [dB] uplink SNR. From the above results, the nonlinearity of HPA in the satellite transponder causes the degradation of BER performance so that it is of interest to consider the power increase.