• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.166-171
• /
• 2008

We cannot imagine any more the environment and energy problems are separated from our lives. The various attempts to solve these problems are made all over the world. In this study it was performed to analyze a different heating and cooling load depending on the earth-sheltering method and kind of soils by using TRNSYS 16 as the first step to establish the design guidelines for earth-sheltered architecture, one of the eco-friendly and low energy consuming building types. After performing this simulation, we found the result like this. It is the most lowest load in case of all of walls and roof being earth-sheltered. But considering of the load reduction rate, the effect of earth-sheltering the exterior vertical wall is more efficient for load reduction than the one of earth-sheltering a roof. And we got a lower thermal load in case of a lower heat conductivity of soil. Afterwards we will conduct a further study for boundary condition at earth-sheltered surface and the simulation analysis about the sensitivity variables. The final goal of this study is preparing the design guidelines for earth-sheltered architecture. so we will contribute to building energy saving.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.807-812
• /
• 2008

The various attempts is made to solve the energy and environment problems. In addition, people interested in their life quality want the more eco-friendly living space. So we suggested that the earth-sheltered house could be one of the eco-friendly and low energy consuming houses to meet the social interest. And we also made data for design of the earth-sheltered house to be applicable to climate of Korea. In this study, a simulation was performed to estimate a boundary temperature according to earth sheltering thickness at the earth-sheltered part(exterior wall) in the case of earth sheltering on the plane ground not using a sloped site. And we analyzed the reduction of a thermal load by using this boundary temperature. We also compared a case of earth sheltering at the vertical wall with a case of earth sheltering at the roof to know the thermal reduction effect of a case of earth sheltering at the vertical wall.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.337-348
• /
• 2021

Brillouin Optical Frequency Domain Analysis (BOFDA) is a distributed fiber optic sensing (DFOS) technique that has unique advantages for performance monitoring of piles. However, the complicated production process and harsh operating environment of offshore PHC pipe piles make it difficult to apply this method to pile load testing. In this study, sensing cables were successfully pre-installed into an offshore PHC pipe pile directly for the first time and the BOFDA technique was used for in-situ monitoring of the pile under axial load. High-resolution strain and internal force distributions along the pile were obtained by the BOFDA sensing system. A finite element analysis incorporating the Degradation and Hardening Hyperbolic Model (DHHM) was carried out to evaluate and predict the performance of the pile, which provides an improved insight into the offshore pile-soil interaction mechanism.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.743-749
• /
• 2009

In this study, the field test for suction drain method which does not require a surcharge load and a sealing sheet was performed at west seashore's site constructed by the dredged and reclaimed clay. The improvements of soft ground by suction drain method was analyzed by the results of real-time field measurement, SPT(Standard Penetration Test) and laboratory tests. The results indicated that the soft ground improvement is effective the vertical drain method used with vacuum pressure rather than surcharge load with considering settlements, dissipation of pore water pressure and shear strength.

• 항공우주기술
• /
• 제10권2호
• /
• pp.94-100
• /
• 2011

본 논문에서는 고성능 저궤도 지구관측위성의 예비연성하중 해석결과에 대하여 평가한다. 연성하중해석을 수행하기 위하여 위성체 모델을 Craig-Bampton 모델로 축약한 후 발사체 개발업체로 제공하였다. 제공된 Craig-Bampton 모델은 인공위성의 질량행렬, 강성행렬, 가속도변환행렬 및 변위변환행렬이다. 발사체 개발업체에서는 위성체 Craig-Bampton 모델과 발사체 모델을 결합하여 연성하중해석을 수행한 후 그 결과를 제공하였다. 제공받은 연성하중해석 결과를 바탕으로 발사시 위성체가 구조적으로 이상이 없는지를 평가하였다. 평가결과 위성체는 발사하중하에서 안전함을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.569-578
• /
• 2018

To minimize the negative alterations in hydrologic and water quality environment in urban areas due to urbanization, Low Impact Development (LID) techniques are actively applied. In Korea, LID facilities are classified as Non-point Pollution Reduction Facilities (NPRFs), and therefore they are evaluated using the performance evaluation method for NPRFs. However, while LID facilities are generally installed in small, distributed configuration and mainly work with the infiltration process, the existing NPRFs are installed on a large scale and mainly work with the reservoir process. Therefore, some limitations are expected in assessing both facilities using the same method as they differ in properties. To solve these problems, in this study, a new method for performance evaluation was proposed with focus on bio-retention LID facilities. EPA SWMM was used to reproduce the hydrologic and water quality phenomena in study area, and SWMM-LID module used to simulate TP interception performance by installing a bio-retention cell under various conditions through long-term simulations. Finally, an empirical formula for Load Capture Ratio (LCR) was derived based on storm water interception ratio in the same form as the existing method. Using the existing formula in estimating the LCR is likely to overestimate the performance of interception for non-point pollutants in the extremely low design capacity, and also underestimate it in the moderate and high design capacity.

• 광물과 암석
• /
• 제35권1호
• /
• pp.65-73
• /
• 2022

지구/행성 내부의 다양한 지질학적 과정을 이해하기 위해서는 고온-고압 환경에서 지구 내부 구성물질의 특성을 이해하는 것이 필수적이다. 이러한 고압환경을 생성하기 위하여 사용되는 멀티 앤빌 프레스(multi-anvil press)는 주로 상부맨틀조건의 극한 상황을 재현하는데 사용된다. 멀티 엔빌프레스의 지질학적 사용을 위한 필수 보정 과정 중 하나는 압력을 생성하기 위한 프레스의 유압과 실제로 시료에 가해지는 압력 사이의 관계인 압력-부하 보정(pressure-load calibration)이다. 압력-부하 보정은 일반적으로 고온-고압 조건에서는 결정질 물질의 상전이를 이용해서 이루어지는데, 고온에서의 경우와 달리 저온(상온)의 경우 상전이 과정이 상대적으로 비효율적이므로 압력-부하 보정의 다른 방법론이 요구된다. 본 연구에서는 파이로프 조성(Mg₃Al₂Si₃O₁₂)의 비정질(비정질 파이로프)의 상온에서의 압축(cold compression)에 따라 발생하는 영구적인 고밀도화 현상(permanent densification)과 그 기원이 되는 알루미늄 배위 환경의 변화를 고해상도의 ²⁷Al MAS 및 3QMAS NMR 분광분석을 통해 정량화하고, 이로부터 압력에 따른 알루미늄의 배위수 변화를 이용해 14/8 HT 조립세트(assembly set)와 1,100톤 멀티 앤빌 프레스에 대한 상온에서의 압력-부하 보정을 수행하였다. 본 연구는 NMR분광분석을 이용하여 압력보정을 수행한 최초의 연구결과이며, 비정질 파이로프의 압축-감압에 따른 원자 단위에서의 비가역적 구조 변화는 섭입대 환경과 같은 저온 고압 환경에서 비정질 물질이 겪는 변화와 그에 따른 지질학적 현상의 이해고양에 실마리를 제공한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.467-472
• /
• 2010

Individual vacuum pressure method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or pre-loading method. In this study, given the inner displacement of the ground where the individual vacuum pressure is applied, this dissertation aimed to reproduce the state of stress in the ground that is subject to the constraints created by the depth of improvement area. Modified Cam Clay theory which made it possible to take into account the isotropic displacement of the ground was applied to the NAP-IVP used simulation; the conception of equivalent permeability proposed by Hird was also applied so that the 3-dimensional real construction effect of drain materials could be reflected in the analysis.

• KIEAE Journal
• /
• 제4권2호
• /
• pp.65-72
• /
• 2004

Ecological architecture enables people to recycle and reuse architectural resources within the category of ecosystem and also to minimize the effect on environment in a whole process, including architectural planning, usage and exhaustion to use sustainable energies. Rammed earth wall construction method utilized in EcoCenter located in Crystalwaters ecological village in Austrailia is a good example, which maximizes its advantages and also covers its limits to use soil and wood as structural resources. In a case of wood, they used non-treated timber to minimize environmental load and utilized used materials in openings. In the roofs, aluminum coated steel which is plated with zinc collects rain effectively even though it is not regenerable. Nontoxic finishes and insulation in floor and ceiling with used papers are able to minimize its environmental load. Solar energy system applied in EcoCenter enables them to market extra energy with electricity companies as well as support needs of its own buildings to utilize photovoltaic panel system with PV panels. Passive solar system is planned effectively in heating and cooling to apply regenerative walls in a use of rammed earth wall construction and natural ventilation systems through openings.