• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.116-124
• /
• 2015

The objective of this study is to evaluate the effects of the replacement levels of grinded fly-ash on the repaired mortar based on a polymer. The main parameters are the curing temperature and replacement levels of grinded fly-ash. The curing temperature and the replacement levels of grinded fly-ash are varied at $40^{\circ}C$, $20^{\circ}C$ and $5^{\circ}C$, and between 0% and 35% of the total binder by weight, respectively. The flow in fresh mortar and compressive strengths according to ages, the relationship of stress-strain, elastic modulus and modulus rupture in hardened mortar, as well as scanning the electron microscopy and the X-ray diffraction of mortar, were measured, respectively. The test results showed that the flow, elastic modulus and modulus rupture are great in mortar specimens with 20~30% of the replacement levels of grinded fly-ash. In addition, compressive strengths according to ages were affected by the replacement levels of grinded fly-ash and the curing temperature indicated that the strength development ratio of mortar with 20% of the replacement levels of grinded fly-ash was greater than others. In the prediction of the compressive strength specified by the ACI 209 code, the strength development at an early and late age can be generalized by the functions of the replacement levels of grinded fly-ash and the curing temperature. In the analysis of scanning the electron microscopy and the X-ray diffraction, the number and intensity of peaks increased and the form of CSH gels on the surface of the particle of grinded fly-ash was observed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.423-446
• /
• 1993

Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.

• Journal of Chest Surgery
• /
• v.40 no.1 s.270
• /
• pp.79-82
• /
• 2007

Tracheobronchial rupture due to blunt chest trauma is an uncommon injury although the incidence is increasing. Early diagnosis and primary repair of tracheobronchial rupture not only restore a normal lung function but also avoid the difficulties and complications associated with delayed diagnosis and repair We present one case of the tracheal transsection caused by traffic accident. Patient suffered from progressive dyspnea, subcutaneous emphysema on the neck and anterior chest wall and tension pneumothorax at both sides were noted. Although both closed thoracostomy were done, massive air leakage through the chest tube continued and subcutaneous emphysema spread to the anterior abdominal wall and scrotum and the degree of dyspnea aggravated. With the impression of tracheobronchial injury, we performed the emergency operation. Preoperative bronchoscopy at the operation room was proceeded, which revealed the trachea was near totally transsected in transverse direction. Operation was performed through collar incisiion on the anterior neck, and the trachea was anastomosed with 4-0 $Vicryl^{(R)}$ interruptedly. Postoperative course were uneventful and patient discharged without any complications.

• Journal of Radiation Protection and Research
• /
• v.29 no.3
• /
• pp.187-196
• /
• 2004

The health effects resulting from severe accidents of typical 1,000MWe KSNP(Korea Standard Nuclear Plant) PWR and typical 600MWe CANDU(CANada Deuterium Uranium) plants were estimated and compared. The population distribution of the site extending to 80km for both site were considered. The releaese fraction for various source term categories(STC) and core inventories were used in the estimation of the health effects risks by using the MACCS2(MELCOR Accident Consequence Code System2) code. Individuals are assumed to evacuate beyond 16km from the site. The health effects considered in this comparative study are early and cancer fatality risk, and the results are presented as CCDF(Complementary Cumulative Distribution Function) curves considering the occurrence probability of each STC's. According to the results, the early and cancer fatality risks of PHWR plants we lower than those of PWR plants. This is attributed the fact that the amount of radioactive mateials that released to the atmosphere resulting from the postulated severe accidents of PHWR plants are smaller than that of PWR plants. And, the dominating initiating event of STC that shows maximum early and cancer fatality risk is SGTR(Steam Generator Tube Rupture) for both plants. Therefore, the appropriated actions must be taken to reduce the occurrence probability and the amounts of radioactive materials released to the environment in order to protect the public for both PWR and PHWR plants.

• Journal of Chest Surgery
• /
• v.47 no.2
• /
• pp.117-123
• /
• 2014

Background: Implanted venous access devices or permanent central venous access systems (PCVASs) are routinely used in oncologic patients. Complications can occur during the implantation or use of such devices. We describe such complications of the PCVAS and their management. Methods: Our retrospective study included 1,460 cases in which PCVAS was implanted in the 11 years between January 2002 and January 2013, including 810 women and 650 men with an average age of 45.2 years. We used polyurethane or silicone catheters. The site of insertion and the surgical or percutaneous procedure were selected on the basis of clinical data and disease information. The subclavian and cephalic veins were our most common sites of insertion. Results: About 1,100 cases (75%) underwent surgery by training surgeons and 360 patients by expert surgeons. Perioperative incidents occurred in 33% and 12% of these patients, respectively. Incidents (28%) included technical difficulties (n=64), a subcutaneous hematoma (n=37), pneumothoraces (n=15), and an intrapleural catheter (n=1). Complications in the short and medium term were present in 14.2% of the cases. Distortion and rupture of the catheter (n=5) were noted in the costoclavicular area (pinch-off syndrome). There were 5 cases of catheter migration into the jugular vein (n=1), superior vena cava (n=1), and heart cavities (n=3). No patient died of PCVAS insertion or complication. Conclusion: PCVAS complications should be diagnosed early and treated with probable removal of this material for preventing any life-threatening outcome associated with complicated PVCAS.

• Annals of Clinical Neurophysiology
• /
• v.12 no.1
• /
• pp.3-6
• /
• 2010

The British guideline for early management of persistent low back pain, published in 2009, indicated that physicians should offer exercise or medication, rather than radiological interventions or injections, as first choice of treatment in the patients with chronic low back pain (CLBP). However, there had been great controversies regarding the effectiveness of interventional treatment of patients with CLBP. Both somatic (discogenic, instability, etc) and psychosocial factors contribute to the pathophysiology of chronic low back pain (CLBP). Although it can be difficult in many occasions, thorough interview with the patients and specific diagnostic approaches can help us to identify which is the main etiology in individual patient. With the recent progress in medical radiology and development of new therapeutic modalities, some subgroups of patients of CLBP caused by somatic factors appear to be good candidates of interventional therapy. Interventional therapy can be considered in patients with CLBP caused by annulus rupture, facet joint degeneration, disc degeneration, and vertebral column instability. Among other subgroups of CLBP, carefully selected patients with disc degeneration show the most favorable result by interventional therapy. In this regard, discogenic pain, either as a form of CLBP or acute discogenic radiculopathy, seems to be a good indication of interventional therapy. Because many spine specialists generally consider those with radiculopathy are easier to be treated, patients with CLBP tend to be subjects of conventional conservative therapy. For these reasons, clinicians should make their best effort to identify every possible somatic cause in patients with CLBP before regarding them as hypochondriacs. In this review, some of the recent evidence on the role of interventional treatment in patients with CLBP will be discussed, and some of our cases who showed favorable results by interventional therapy will be presented.

• Advances in concrete construction
• /
• v.2 no.3
• /
• pp.177-192
• /
• 2014

One of the main applications of FRP composites is confining concrete columns. Hence identifying the cyclic and monotonic stress-strain behavior of confined concrete columns and the parameters influencing this behavior is inevitable. Two significant parameters affecting the stress-strain behavior are aspect ratio and corner radius. The present study aims to scrutinize the effects of corner radius and aspect ratio on different aspects of stress-strain behavior of FRP confined concrete specimens (rectangular, square and circular). Hence 44 FRP confined concrete specimens were tested and the results of the tests were investigated. The findings indicated that for specimens with different aspect ratios, the relationship between the ultimate stress and the corner radius is linear and the variations of the ultimate stress versus the corner radius decreases as a result of an increase in aspect ratio. It was also observed that increase of the corner radius results in increase of the compressive strength and ultimate axial strain and increase of the aspect ratio causes an increase of the ultimate axial strain but a decrease of the compressive strength. Investigation of the ultimate condition showed that the FRP hoop rupture strain is smaller in comparison with the one obtained from the tensile coupon test and also the ultimate axial strain and confined concrete strength are smaller when a prism is under monotonic loading. Other important results of this study were, an increase in the axial strain during the early stage of unloading paths and increase of the confining effect of FRP jacket with the increase and decrease of the corner radius and aspect ratio respectively, a decrease in the slope of reloading branches with cycle repetitions and the independence of this trend from the variations of the aspect ratio and corner radius and also quadric relationship between the number of each cycle and the plastic strain of the same cycle as well as the independence of this relationship from the aspect ratio and corner radius.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.2
• /
• pp.34-41
• /
• 2011

Wrought nickel-base superalloys are being considered as the structural materials in very-high temperature gas-cooled reactors. To understand the effects of impurities, especially oxygen, in helium coolant on the mechanical properties of Alloy 617, creep tests were performed in high temperature flowing He environments with varying $O_2$ contents at 800, 900, and $1000^{\circ}C$. Also, creep life in static He was measured to simulate the pseudo-inert environment. Creep life was the longest in static He, while the shortest in flowing helium. In static He, impurities like $O_2$ and moisture were quickly consumed by oxidation in the early stage of creep test, which prevented further oxidation during creep test. Without oxidation, microstructural change detrimental to creep such as decarburization and internal oxidation were prevented, which resulted in longer creep life. On the other hand, in flowing He environment, surface oxides were not stable enough to act as diffusion barriers for oxidation. Therefore, extensive decarburization and internal oxidation under tensile load contributed to premature failure resulting in short creep life. Limited test in flowing He+200ppm $O_2$ resulted in even shorter creep life. The oxidation samples showed extensive spallation which resulted in severe decarburization and internal oxidation in those environments. Further test and analysis are underway to clarify the relationship between oxidation and creep resistance.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.4
• /
• pp.151-155
• /
• 2015

Purpose: The purpose of this study was to analyze the frequency and patterns of intra-articular lesions detected during ankle fracture surgery using ankle arthroscopy. Materials and Methods: Thirty patients (31 ankles) who underwent open reduction and internal fixation combined with ankle arthroscopy for acute ankle fracture at Inje University Busan Paik Hospital from June 2011 to September 2013 were evaluated. The ankle fractures were classified according to the AO/OTA (AO Foundation and Orthopaedic Trauma Association) classification and the intraarticular injuries were identified by ankle arthroscopy. Osteochondral lesions of the talus were divided into nine subtypes based on their locations, and the ligament injuries were classified according to avulsion fracture and rupture. Results: Using arthroscopy, abnormality in the distal tibiofibular ligament was found in 21 cases and osteochondral lesions and defects of the talus larger than 5 mm were detected in 26 cases. Among ligament injuries, anterior inferior tibio-fibular ligament injury was found in 14 cases, posterior inferior tibio-fibular ligament injury was found in two cases, deep deltoid ligament injury was found in three cases, and deep transverse tibio-fibular ligament injury was found in five cases. The locations of the osteochondral lesions were on the antero-lateral, antero-medial, centro-medial, centro-central, centro-lateral, and postero-lateral talus in 11, one, two, one, two, and nine cases, respectively. Conclusion: With early diagnosis and treatment arthroscopy performed at the time of intra-articular fracture surgery is expected to result in a good outcome.

• Journal of Chest Surgery
• /
• v.10 no.2
• /
• pp.327-336
• /
• 1977

A chinical analysis was performed on 383 ases of hest injurjes eperienced at Department of thoraci Surgery, Seoul National University Hospital during 21 year period From 1957 to 1977. Of 383 patients o hest injuries, 209 cases were result from nonpenetrating injuries whereas 175 were from penetrating injuries, and there were 258 cases of hemothorax or/and pneumothorax, 162 of rib fracture, 33 of foreign body, 26 of clavicle frcture, 26 of lung contusion, 17 of diaphragmati laceration, 14 of hemoperiardium, 14 of flail chest and others. Stab wound was the most common in penetrating injuries and followed by gunshot and shell fragments. The majority of nonpenetrating chest injury paiens were traffi accident vitims and falls accounted for the next largest group of accidents. Chest injuries were frequently encountered in the age group between 16 and 50 years, and 321 patients were male comparing to 62 of female. In blunt hest injuries the patients with five or more rib fractures had a 85 per ent incidence of intrathoracic injury and 19 per cent had an intraabdominal organ damage, whereas those with four or less rib fractures had a 69 per cent and a 6 per cent incidence respectively. The principal associated injuries were cerebral contusion on 19 cases, renal contusion on 10, liver laceration on 7, peripheral vessel laceration on 5, spleen laceration on 3 and extremity fracture on 18 patients. The principles of therapy for early complications of chest trauma were rapid reexpansion of the lungs by thoracentesis (46 cases) and closed thoracotomy (125 cases) but open thoracotomy had to be done on 90 cases (23.5%) because of massive bleeding or intrapleural hematoma, foreign body, cardiac injury, diaphragmatic laceration and bronhial rupture. The over all mortality was 2.87 per cent (11 among 383 cases), 8 cases were from penetrating injuries and 3 from nonpenetrating injuries.