Browse > Article
http://dx.doi.org/10.11112/jksmi.2015.19.4.116

The Effect of the Replacement of Grinded Fly Ash according to Curing Temperature on Repair Mortar Based on Polymer Admixture  

Sim, Jae-Il (해평선(주) 기술연구소)
Mun, Ju-Hyun (지엘기술(주) 기술연구소)
Yun, In-Gu (지엘기술(주))
Jeon, Young-Su (경기대학교 일반대학원 건축공학과)
Publication Information
Journal of the Korea institute for structural maintenance and inspection / v.19, no.4, 2015 , pp. 116-124 More about this Journal
Abstract
The objective of this study is to evaluate the effects of the replacement levels of grinded fly-ash on the repaired mortar based on a polymer. The main parameters are the curing temperature and replacement levels of grinded fly-ash. The curing temperature and the replacement levels of grinded fly-ash are varied at $40^{\circ}C$, $20^{\circ}C$ and $5^{\circ}C$, and between 0% and 35% of the total binder by weight, respectively. The flow in fresh mortar and compressive strengths according to ages, the relationship of stress-strain, elastic modulus and modulus rupture in hardened mortar, as well as scanning the electron microscopy and the X-ray diffraction of mortar, were measured, respectively. The test results showed that the flow, elastic modulus and modulus rupture are great in mortar specimens with 20~30% of the replacement levels of grinded fly-ash. In addition, compressive strengths according to ages were affected by the replacement levels of grinded fly-ash and the curing temperature indicated that the strength development ratio of mortar with 20% of the replacement levels of grinded fly-ash was greater than others. In the prediction of the compressive strength specified by the ACI 209 code, the strength development at an early and late age can be generalized by the functions of the replacement levels of grinded fly-ash and the curing temperature. In the analysis of scanning the electron microscopy and the X-ray diffraction, the number and intensity of peaks increased and the form of CSH gels on the surface of the particle of grinded fly-ash was observed.
Keywords
Grinded fly ash; Repair mortar; Polymer; Mechanical property; Strength development factor;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 ACI 209R-92. (1994), Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures Practice Part 1: Materials and General Properties of Concrete, American Concrete Institute.
2 ACI Committee 318-11. (2011), Building Code Requirement for Structural Concrete and Commentary, American Concrete Institute.
3 Bae, W. M., Baek, D. I., Song, H. K., and Kim, M. S. (2003), A study on the characteristics of antiwashout underwater concrete with blended ratio of ground granulated blast furnace slag and fly ash, Proceedings of the Korea Society of Civil Engineer, 1176-1181.
4 Cheong, S. H., Ahn, S. K., An, T. H., and Jeon, Y. S. (2013), The hydration heat characteristics of mock-up concrete by replacement of modified flyash, Journal of the Korea Concrete Institute proceeding, 25(2), 347-348.   DOI   ScienceOn
5 Cheong, S. H., Ahn, S. K., Kang, H. J., An, T. H., and Jeon, Y. S. (2013), The characteristics of concrete compressive strength by replacement ratio of modified flyash, Journal of the Korea Concrete Institute proceeding, 25(1), 247-248.
6 Cheong, S. H., Ahn, S. K., Kang, H. J., An, T. H., and Jeon, Y. S. (2012), A study on characteristics of flyash by physical grinding, Journal of the Korea Concrete Institute proceeding, 24(2), 335-336.
7 Choi, Y. J., Kim, J. H., Jee, N. Y., and Kim, H. J. (1998), Study On The Rheological Properties of Cement Paste Using Fly Ash and Slag Powder, Journal of Architectural Institute of Korea, 14(6), 105-115.
8 Hong, S. G., Kim, D. Y., and Lee, D. S. (2013), Fundamental Properties and Hydration Characteristics of Mortar Based on MgO Added Industrial By-products, Journal of the Korea Concrete Institute, 25(5), 565-572.   DOI   ScienceOn
9 Jung, J. D. (2002), A Experimental study on Strength Development of Cement Mortar Using a Large Amount of Micro Grinding Fly-Ash, Journal of Architectural Institute of Korea, 18(9), 133-140.
10 Lee, Y. J., Shin, S. Y., and Kim, Y. S. (2013) A Study on the Compressive Strength Property of Mortar with Fly Ash using Water Eluted from Recycled Coarse Aggregates, Journal of Architectural Institute of Korea, 29(3), 89-96.
11 Lee, M. H., and Song, T. H. (2007), An Experimental Study on the Flexural Behavior of One-Way Concrete Slabs Using the Restorative Mortar and Crimped Wire Mesh, Journal of the Korea Concrete Institute, 19(5), 569-575.   DOI   ScienceOn
12 Lee, S. S., Song, H. Y., and Lee, S. M. (2009), An Experimental Study on the Influence of High Fineness Fly Ash and Water-Binder Ratio on Properties of Concrete, Journal of the Korea Concrete Institute, 21(1), 29-35.   DOI   ScienceOn
13 Malhotra, V. M., and Mehta, P. K. (2002), High-Performance, High-volume Fly Ash Concrete: Materials, Mixture Proportioning, Properties, Construction Practice, and Case Histories, Supplementary Cementing Materials for Sustainable Development Inc., Ottawa, Canada. 13-30.
14 Park, I. Y., Park, M. S., Lim, N. K., and Jung, S. J. (2000), An Experimental Study on the Application & Quality Control of General Structure Concrete Intermixing Fly-ash, Journal of Architectural Institute of Korea, 16(8), 67-74.
15 Song, H. S., Lee, C. Y., and Min, C. S. (2006), Effects of Polymer in Properties of Pre mixed Type Mortar for Concrete Repair, Korea Institute for Structural Maintenance and Inspection, 10(4), 153-159.
16 Whang, M. K. (2008), A Study on the Physical Properties of High Ductile Concrete using PVA Fibers, Master's Thesis, Daejeon University, Daejeon, Korea.
17 Yang, K. H. (2014) Development of Unit System Comprising of Formwork with Height Above 4m and Low-Heat Concrete to Strengthen Export Competition of Nuclear Power Plant, Technical Report, Kyonggi University.