• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.30-37
• /
• 2009

Early enamel caries is commonly remineralized by the patient‘s improved oral hygiene or fluoridation, however the result is clinically unreliable. As an alternative, we tried to seal the lesions with low-viscosity light-curing resin. The aim of the present study was to search the proper methods of the adequate pretreatment prior to applying adhesive resin on natural proximal caries lesions. Thirty nine extracted deciduous molar teeth showing proximal early caries lesion were used for this study. They were divided into 5 groups : Group 1; only carefully cleaned with water, group 2; etched with 15% HCl for 15s, group 3; etched with 35% phosphoric acid for 15s, group 4; etched with 35% phosphoric acid for 30s, and group 5; cleaned with 0.5% NaOCl. Following results were obtained by evaluating with SEM and CLSM after applied with adhesive resin. 1. As a result of SEM evaluation, group 2 showed clearly removed surface layer, group 3,4 showed partially removed surface layer irregularly, group 5 showed slightly removed surface layer. 2. Group 2 showed the deepest infiltration depth, followed by group 4, group 3, group 5, group 1 and besides group 5, other groups showed significantly deep infiltration depth. (p < 0.01) In conclusion, the best methods of the adequate pretreatment on natural proximal caries lesion for deep infiltration of adhesive resin was to etch with 15% HCl for 15s.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.207-220
• /
• 2006

The newly developed equipments for the early detection of carious lesion are LFD (laser fluorescence device), Ultrasonic diagnostic system, CLSM(confocal laser scanning microscopy), QLF(quantitative light-induced fluorescence) and DIFOTI (digital imaging fiber-optic trans-illumination) system. In this study, DIFOTI system and LFD were used for the detection of early enamel caries. Twenty five primary teeth extracted from twenty one children at around the dentitional exchanging period were selected as samples. The results obtained from DIFOTI imaging and LFD measurement were compared with those of CLSM and comprehensive evaluations were made for the diagnostic capacity of each device. In vitro test, 40 sample teeth with their buccal & lingual surface formed by a window of $2{\times}3mm$ in diameter were immersed in artificial demineralizing solution for the period of 4, 8, 12 and 16 days. The results obtained from the experimental groups (DIFOTI, LFD) were compared to control group (CLSM) and we have reached to the following conclusions. 1. The sensitivity and specificity of DIFOTI system operated in oral environment was 88.2% and 76.9% respectively. 2. The sensitivity and specificity of LFD measured in oral environment was 76.5% and 69.2% respectively. 3, Regression analysis on the light transparent rate of DIFOTI showed its decrease according to the length of primary enamel decalcification performed in vitro(r=-0.96, p<0.05). 4. No statistically significant difference between LFT measurement and the length of in vitro decalcification was found in regression analysis (p>0.05). 5. The correlation coefficient of DIFOTI image transparent rate and the lesion depth of CLMS was -0.6988 (p<0.05), whereas no statistically significant difference was found for LFD measurement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.199-208
• /
• 2009

This study was performed to improve the conventional $DIFOTI^{TM}$ system(EOS Inc., USA) by developing the prototype of DIFOTI system which consists of light emitting diode(LED) and digital camera. The images of enamel surfaces treated under Carbopol 907 de-mineralizing solution were taken daily during 7 days of experimental periods by both DIFOTI systems. The results of comparative analyses of obtained images can be summarized as follows: 1. Trans-illumination indices of images taken from sample enamel surfaces were decreased with time in both systems. 2. The difference of intensity of luminance between sound and de-mineralized enamel surface in prototype DIFOTI system was shown to be relatively smaller than conventional $DIFOTI^{TM}$ system. The application of LED light source in prototype DIFOTI system could possibly reduce the amount of current consumption and that could ultimately lead us to the successful development of wireless model with battery. The innovative development of digital camera is undoubtedly expected to create much clearer image despite of wireless transfer. LED and digital camera can be combined into a smaller size but a very important task of improving image manager and analyzing program into a simpler and easier one to manipulate has to be solved.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.1
• /
• pp.26-30
• /
• 2014

Prader-Willi syndrome (PWS) is a rare neurodevelopmental disease caused by abnormality of chromosome 15q11-13. The estimated prevalence of PWS is 1/10,000-30,000. Most common features of this disease are feeding problems characterized by poor sucking habit related with neonatal or infantile hypotonia and obesity due to early childhood hyperphagia involved with lack of satiety. In the orodental findings, enamel hypoplasia, rampant caries, delayed eruption, poor oral hygiene, hypodontia, supernumerary teeth, increased tooth wear, decreased salivary flow and change in saliva composition were reported. This case report describes the dental treatment of 3-year-9-months-old male patient with PWS. Periodic check-ups and conservative treatments were followed, however, rapid dental caries progression caused by estimating hyposalivation was observed. Because of lack of patient cooperation, dental procedures were performed under general anesthesia.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.1001-1013
• /
• 2020

The formation of biofilms on the enamel surface of teeth by Streptococcus mutans is an important step in dental plaque formation, demineralization, and early caries because the biofilm is where other bacteria involved in dental caries attach, grow, and proliferate. The objectives of this study were to determine the effect of phosvitin (PSV) on the biofilm formation, exopolysaccharides (EPS) production, adherence activity of S. mutans, and the expression of genes related to the compounds essential for biofilm formation (quorum-sensing inducers and components of biofilm matrix) by S. mutans. PSV significantly reduced the biofilm-forming activity of S. mutans and increased the degradation of preformed biofilms by S. mutans. PSV inhibited the adherence activity of S. mutans by 31.9%-33.6%, and the production of EPS by 62%-65% depending upon the strains and the amount of PSV added. The expressions of genes regulating the production of EPS and the quorum-sensing-inducers (gtfA, gtfD, ftf, relA, vicR, brpA, and comDE) in all S. mutans strains were down-regulated by PSV, but gtfB was down-regulated only in S. mutans KCTC 5316. Therefore, the anti-biofilm-forming activity of PSV was accomplished through the inhibition of biofilm formation, adherence activity, and the production of quorum-sensing inducers and EPS by S. mutans.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.662-670
• /
• 2008

The purpose of this in vitro study was to evaluate the effect of fluoride containing adhesive film on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 25: (1) APF gel applied ; (2) CavityShield$^{TM}$ applied; (3) 3% fluoride film applied; (4) 5% fluoride film applied; Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 72 hours. Then lesion of the surface microhardness were measured by the Vicke's hardness test and the lesions depth were measured by polarizing light microscope. The results of the present study are as follows: 1. Difference of microhardness value ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group IV, III, I but, no significant difference was between group II, III and IV. 2. Difference of mean lesion depth ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group III, IV and I but no significant difference was between group III and IV. The results of the present study indicate that the fluoride film application is more effective than APF gel and is similar to fluoride varnish application for prevention of dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.152-157
• /
• 2005

Hypophosphatemia rickets, also known as Vitamin D-resistant rickets(VDRR) and refractory rickets, is a form of rickets which is resistant to the usual doses of vitamin D. VDRR is characterized by decreased renal tubular reabsorption of inorganic phosphate and is easily diagnosed by a normal blood calcium, hypophosphatemia, and slightly elevated alkaline phosphatase. Clinical features of Hypophosphatemia rickets included lateral bowing deformities of the legs, short stature, scoliosis, and enlargement of wrist and ankles. Dental finding in patient with VDRR were spontaneous dental abscesses in caries free teeth and other dental findings included delayed eruption, delayed apical closure, thin and hypoplastic enamel, absent or poorly defined lamina dura, enlarged pulp chambers, and numerous accessory canals and pulp horns that extend up and into the dentinoenamel junction. we reported the clinical feature and treatment of VDRR child who was referred from the department of pediatrics for early loss of primary teeth and its treatment.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.151-161
• /
• 2007

Dental caries is the most common disease in the oral cavity However, the mechanism and treatment of dental caries is not completely understood since many complex factors are involved. Especially the effect of pH on remineralization of early stage of dental caries is still controversial In this study, dental caries in dentin was induced by using lactic acidulated buffering solutions and the loss or inorganic substance was measured. Also decalcified specimens were remineralized by three groups of solution with different pH (group of pH 4.3, 5.0, and 5.5). Then, the amount and the area of inorganic substance precipitation was quantitatively analyzed with microradiograph. Also a qualitative comparison of the normal phase the demineralized phase, and the remineralized phase of hydroxyapatite crystal was made under SEM. The results were as follows, 1. In microradiograghic analysis, as the pH increased, the amount of remineralization in decalcified dentin tended to increase significantly As the pH decreaced, deeper decalcification, however, occurred along with remineralization. The group of pH 5.5 had a tendency to be remineralized without demineralization (p<0.05). 2. In SEM view, the remineralization in dentine caries occurred from the hydroxyapatite crystal surface surrounding the mesh of organic matrix, and eventually filled up the demineralized area. 3. 5 days after remineralization, hydroxyapatite crystal grew bigger with deposition of inorganic substance in pH 4.3 and 5.0 group, and the crystal in the remineralized area appeared to return to normal. After 10 days, the crystals in group of pH 4.3 and 5.0, which grew bigger after 5 days of remineralization, turned back to their normal size, but in group of pH 5.5, some crystals were found to double their size. In according to the results of this experiment, the decalcifying and remineralizing process of dentine is neither simple nor independent, but a dynamic process in which decalcification and remineralization occur simultaneously. The remineralization process occurred from the hydroxyapatite crystal surface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2006

The purpose of this study were to evaluate the efficacy of the newly developed Digital Imaging Fiber-Optic Trans-illumination (DIFOTI) system in detecting carious lesions in vivo as gold standard with confocal laser scanning microscopy and compared the efficacy of traditional radiography and DIFOTI system in vito as gold standard with confocal laser scanning microscopy, too. For the in vivo study, the subject pool consisted of 23 grammar school age patients just prior to entering the mixed dentition phase Each patient was given a DIFOTI examination of the anterior and posterior teeth. During $6{\sim}8$ months, the naturally expire primary teeth were collected and the efficacy of DIFOTI system was compared with confocal laser scanning microscopy. For in vitro study, 40 primary teeth were collected and decalcified by Carbopol decalcification solution for 1, 2, 4 and 8 days. Every experiment period, all teeth were DIFOTI examined and sectioned to take an image of confocal laser scanning microscopy Sensitivity and specificity were calculated from the result of DIFOTI examine and confocal laser scanning microscopy analysis. The results are as follows : 1. From the in vivo study, the sensitivity of DIFOTI examine was 0. 61 and specificity was 0.63. 2. From the in vivo study, the sensitivity of DIFOTI examine was 0.71 and specificity was 0.75.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.