• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.246-252
• /
• 2016

Since thermal power plant (TPP) equipment is operated under very high pressure and temperature, failures of the equipment give rise to severe losses of life and property. To prevent the losses, fault detection method is, therefore, absolutely necessary to identify abnormal operating conditions of the equipment in advance. In this paper, we present Mahalanobis distance (MD) based fault detection method for steam boiler tube in TPP. In the MD-based method, it is supposed that abnormal data samples are far away from normal samples. Using multivariate samples collected from normal target system, mean vector and covariance matrix are calculated and threshold value of MD is decided. In a test phase, after calculating the MDs between the mean vector and test samples, alarm signals occur if the MDs exceed the predefined threshold. To demonstrate the performance, a failure case due to boiler tube leakage in 200MW TPP is employed. The experimental results show that the presented method can perform early detection of boiler tube leakage successfully.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.163-191
• /
• 1989

The accident of the midair collision, passengers' falling or goods' dropping occurs or supersonic aircraft make a sonic boom during their conveying passengers or goods to the destination. The accident in transmit damages the their parties on the surface or their properties. In these cases, the third parties who were harmed to their lives or properties have the right to claim damages against the air carrier who caused them. These matters have become one of the important things since aircraft conveyed passengers and goods. Therefore, it is a great concern to settle these matters by law. But the Safety of the present aircraft has been much increased and the aircraft have become larger in size. Its flight altitude became higher than before. So the relationship of the aircraft to the third parties is much different from that of the earlier aircraft. The air transport is now indispensable to our life. It is not so easy to control these matters. In the early part of 20th century, when the third parties suffered the damage, many European countries made laws on the basis of the principle of liability without fault. But each country had a variety of its own law, and different kinds of difficulties have been brought about. Accordingly, the Rome Convention on Surface Damage (1933, 1952, 1978) has been made and revised. In spite of being revised, it contains many problems, and is not carried into effect world-wide. On the other hand, there are no regulations about the compensation of the third parties damaged in Korean existing laws. In case the damage is brought about to them, it is obviously true that the settlement of the liability of compensation for damage should be made by the general principle on the tort in domestic laws. At this point, it is urgent that we make a special law though the domestic legislation as a preliminary measure before we sign the international convention to save third damaged. It is desirable that we should, for the responsibility of the air carriage for the demage of the third parties on the surface, bring in the theory of the absolute liability in view of the legislation of many conutries. As the aircraft fly in the sky, their flight always contains some danger. It is very difficult to prove the fault, and the operator should suffer the principle of liability without fault or the similiar one. In case the liability without fault will be imposed upon the operator for the damage of the third parties, it is necessary to bring in the liability protection system for the protection and up upbringing of the air carriage. The Burden of danger of the air carriage will be reduced by introducing the system. A domestic legislation measure should be necessarily taken as soon as possible as a legal security measure on these matters.

• Journal of KIISE:Software and Applications
• /
• v.37 no.7
• /
• pp.536-547
• /
• 2010

Relative importance and complexity of recent software is getting increased because the software is needed to provide considerable amount of functions and high performance. Therefore, developing reliable software is importantly issued. In order to develop reliable software, it is necessary to manage software reliability at the early phases, but most reliability estimation models are used at system or operational test phases. In order to develop highly reliable software, it is necessary to manage software reliability at the early test phases based on characteristic of the phases that is developers and testers are not separated and developers perform test and debug activities together. Therefore, a new reliability estimation model considering test and debug time together is necessarily needed. In this paper, we propose a new reliability estimation model to manage reliability of individual units from the early test phases and in order to show how to fit the model to actual data and usefulness, we collected industrial data and used it for the experiment.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.485-505
• /
• 2022

On November 15, 2017, a Mw 5.4 Pohang Earthquake occurred at about 4 km hypocenter in the Heunghae area, and caused great damage to Pohang city, Korea. In the Heunghae area, which is the central part of the Pohang Basin, the Cretaceous Gyeongsang Supergroup and the Late Cretaceous to Early Paleogene Bulguksa igneous rocks as basement rocks and the Neogene Yeonil Group as the fillings of the Pohang Basin, are distributed. In this paper, structural and geological researches on the crustal deformations (folds, faults, joints) in the Pohang Basin and the coseismic ground deformations (sand volcanoes, ground cracks, pup-up structures) of Pohang Earthquake were carried out, and the deformation history of the Pohang Basin and characteristics of the coseismic ground deformations were considered. The crustal deformations were formed through at least five deformation stages before the Quaternary faulting: forming stages of the normal-slip (Gokgang fault) faults which strike (N)NE and dip at high angles, and the high-angle joints of E-W trend regionally recognized in Yeonil Group and the faults (sub)parallel to them, and the conjugate normal-slip faults (Heunghae fault and Hyeongsan fault) which strike E-W and dip at middle or low angles and the accompanying E-W folds, and the conjugate strike-slip faults dipped at high angles in which the (N)NW and E-W (NE) striking fault sets show the (reverse) sinistral and dextral strike-slips, respectively, and the conjugate reverse-slip faults in which the NNE and NNW striking fault sets dip at middle angles and the accompanying N-S folds. Sand volcanoes often exhibit linear arrangements (sub)parallel to ground cracks in the coseismic ground deformations. The N-S or (N)NE trending pop-up structures and ground cracks and E-W or (W)NW trending ground were formed by the reverse-slip movement of the earthquake source fault and the accompanying buckling folding of its hanging wall due to the maximum horizontal stress of the Pohang Earthquake source. These structural activities occurred extensively in the Heunghae area, which is at the hanging wall of the earthquake source fault, and caused enormous property damages here.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.209-212
• /
• 1994

Cheju Island was formed by volcanic activity probably related to the inferred geodynamics in the early Quaternary times. Paleostress analysis, in spite of a few fault slip data collected near Sanbangsan trachyte dome (dated 0.87 Ma) represents an extentional tectonic event with the direction ENE-WSW. Joint anayses in the vicinity of Seahwa reveal three extensional tectonic events of directions NW-SE, NE-SW and ENE-WSW. Especially the extensional event with the direction ENE-WSW affected the whole Cheju area during the most recent time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.486-490
• /
• 2003

Software qualify models can predict the risk of faults in the software early enough for cost-effective prevention of problems. This paper introduces a least squares support vector machine (LS-SVM) as a fuzzy regression method for predicting fault ranges in the software under development. This LS-SVM deals with the fuzzy data with crisp inputs and fuzzy output. Predicting the exact number of bugs in software is often not necessary. This LS-SVM can predict the interval that the number of faults of the program at each session falls into with a certain possibility. A case study on software reliability problem is used to illustrate the usefulness of this LS -SVM.

• Economic and Environmental Geology
• /
• v.53 no.5
• /
• pp.631-643
• /
• 2020

The central-western Korean Peninsula contains records of an Early Mesozoic collisional event related to the final amalgamation of the East Asian continent. Here, we present a renewed geologic map of the Deokjeok and Soya islands in the central-western Korean Peninsula and its explanatory note. Our geologic map was based on a detailed investigation of the northeastern area of both islands, which is characterized by a complex fault and shear zone system that accommodated the crustal deformation related to the Mesozoic post-collisional orogenic collapse and the subsequent structural inversion. We suggest future directions of study aiming at addressing issues regarding the deformational responses of crust to the Mesozoic tectonic transition and orogenic cycles.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.81-90
• /
• 2004

This paper presents new testability measure based on learning, which can be useful in the deterministic process of test pattern generation algorithms. This testability measure uses the structural information that are obtained by teaming. The proposed testability measure searches for test pattern that can early detect the conflict in case of the hardest decision problems. On the other hand in case of the easiest decision problem, it searches for test pattern that likely results in the least conflict. The proposed testability measure reduces CPU time to generate test pattern that accomplishes the same fault coverage as that of the distance-based measure.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.635-637
• /
• 1998

시험 단계나 운용 단계에서 발견된 소프트웨어의 오류를 수정하기 위해서는 많은 비용을 투자해야 한다. 시스템 개발 초기 단계인 설계 단계에서 소프트웨어 시스템의 신뢰도에 영향을 많이 미치는 부분을 찾아 오류를 사전에 방지하는 연구가 많이 진행되고 있다. 모듈의 신뢰도를 설계 단계에서 예측할 수 있다면 프로젝트 관리자는 결함 경향이 강한 모듈 개발에 더 많은 자원을 할당함으로써 보다 신뢰성 있는 소프트웨어를 생산 할 수 있다. 본 논문에서는 실시간 소프트웨어의 설계 결과에 대한 복잡도 측정치를 토대로 신뢰도를 예측하는 모델을 제안하다. 유전자 알고리즘으로 찾아낸 이 모델을 사용하여 결함 경향이 강한(fault prone) 모듈과 그렇지 않은 모듈은 96%의 정확도로 선별해 낼 수 있다.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.199-208
• /
• 1999

In this paper, KOMPSAT satellite launch and deployment operations are discussed. The U.S. Taurus launch vehicle delivers KOMPSAT satellite into the mission orbit directly. Launch and deployment operations is monitored and controlled by several international ground stations including Korean Ground Station (KGS). After separation from launch vehicle, KOMPSAT spacecraft deploys solar array by on-board autonomous stored commands without ground inter-vention and stabilizes the satellite such that solar arrays point to the sun. Autonomous ground communication is designed for KOMPSAT for the early orbit ground contact. KOMPSAT space-craft has capability of handing contingency situation by on-board fault management design to retry deployment sequence.