• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.62-66
• /
• 1984

One row of pollen parent to two rows of seed parent (1:2), 2:4 and solid (1:2) planting patterns (PP) were compared in seed parent densities of 3,500, 5,000 and 6,500 plants per 10 ares to determine effects of PP and plant density on growths of seed and pollen plants, and seed yield of seed parent of modified single cross corn hybrid. Planting pattern did not significantly affect agronomic characteristics of seed plant except ear number per 100 plants and seed yield which were greater in solid and 1:2 PP than in 2:4 PP. Significant PP x plant density interaction did not exist for agronomic characteristics of seed parent. In the seed parent, plant height and 100 kernel weight were not affected by plant density, but ear height, ear number per 100 plants, and kernel number per ear were linearly decreased with increased plant densities. Seed yield ranged from 330 to 460 kg per 10 ares and overall yield response to plant density was quadratic. Tassel length and spikelet number per tassel of the pollen parent were significantly affected by PP and plant density. Significant PP x plant density interaction existed for tassel length and spikelet number per tassel. Tassel length and spikelet number per tassel were greater in 1:2 and 2:4 PP compared to solid PP and were greatly reduced with increased plant densities in solid and 1:2 PP. The results indicated that 1:2 or 2:4 PP at around 5,000 plants per 10 ares for seed parent would be suitable for seed production of modified single cross com hybrid.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.870-871
• /
• 2009

• Korean Journal of Oriental Medicine
• /
• v.18 no.3
• /
• pp.87-93
• /
• 2012

Objectives : The present study is to verify whether the deformation of ear acupuncture needle tips that are currently on the market is caused during the process of initial packaging. Methods : Ear acupuncture needles distributed from three different companies were collected to measure the size of the groove on the transparent plate which is used in for the intial packaging. Then the tolerance range for off-centered tips, which represent the range of the groove size that is safe from damaging the needle tip, was determined based on the vertical length measured from tip to handle. 200 ear acupuncture needles were dipped in alcohol and scanned to confirm the position of the needles. Stereo-microscope was used to observe the needle tips that were located outside the tolerance range. Results : The increased number of ear acupuncture needle tips placed outside the tolerance range were seen from in the order of C company, A company and B company. The increased deformation of the needle tips caused by initial packaging was observed in the order of A company, C company and B company. Conclusion : Only the ear acupuncture needles from B company showed the strong correlation between needle tip deformation and initial packaging. It has been observed that the deformation of the ear acupuncture needles is mainly due to manufacturing process, not the packaging process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.178-184
• /
• 1992

Five varieties of silage corn were cultivated to compare the growth characteristics and productivity. Corn varieties were Pioneer 3144(P 3144), 3160(P 3160), 3282(P 3282), 3352(P 3352) and Suweon 19 (S 19). The corns were seeded on May 2 and harvested on August 15, and measured the plant height, leaf length, leaf width, stem diameter, and yields of fresh and dry matter. The results obtained were as follows: 1. Plant height of P 3352 and P 3144 grown about 280cm throughout the experimental period was the tallest(P<.Ol), and those of P 3160, P 3282 and Suweon 19 ranged from 246.3 to 256.0 cm. 2. Leaf length is the longest in P 3352 and the shortest in P 3282(97.63cm vs 84.17cm), and there was significant(P<.Ol) difference between corn varieties. 3. Stem diameter was the longest in P 3144 and the shortest(P<.Ol) in P 3352(3.28cm vs 2.66cm). 4. P 3144, P 3282 and P 3352 had the greatest(P<.Ol) fresh matter yields per 10a in leaf, stem, and ear and whole plant, respectively. 5. Dry matter yield of P 3282 was the greatest(P<.Ol) in stem(1,080.6 kg/lOa) and leaf(304.5 kg/lOa), and that of P 3352 was the greatest in ear(864.1 kg/lOa) and whole plant yield(2,021 kg/lOa). 6. Ratios of respective part of corn to total dry matter were ranged from 12.7 to 17.8 76 for leaf, 44.5 to 66.9% for stem and husks, and 16.9 to 42.8 % for ear, and the highest in P 3160, P 3160 and P 3352, respectively. Consequently, P 3352, P 3144 and P 3282 shown high productivity in dry matter yield could be recommended as a reliable corn varieties for silage.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.62-69
• /
• 2015

Pressure change inside cabin as well as in tunnel has been calculated to assess the passenger pressure comfort of high-speed train. $C-STA^{TM}$, a CFD program based on axi-symmetric Navier-Stokes equation and Roe's FDS has been used to simulate the pressure change in tunnel during a high-speed train passing through it. To present the relative motion between the train and the tunnel, a modified patched grid scheme based on the structured grid system has been employed. The simulation program has been validated by comparing the simulation results with field measurements. Extensive parametric study has been conducted for various train speed, tunnel cross-sectional area and tunnel length to the pressure change in cabin. KTX-Sancheon(KTX2) high-speed train has been chosen for simulation and the train speed have been varied from 200 km/h to 375 km/h. The tunnel length has been varied from 300 m to 7.5 km and tunnel area from $50m^2$ to $120m^2$. Total 504 simulations have been conducted varying the parameters. Based on the database produced from the parametric simulations, minimum tunnel cross-sectional area has been surveyed for various train speeds based on Korean regulation on pressure change in cabin.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.47-54
• /
• 1988

The growth characteristics and yield per unit area of two cultivation systems of forage, corn (Zea mays L.) monoculture and corn-cowpea (Vigna sinesis King) inter-cropping were compared and obtained follow results. 1. The two cultivation systems were not significantly different in leaf length, leaf width and length of internode with harvesting time. 2. The weight of stalk and leaves of a plant were decreased with maturity, while weight of ear was markedly increased. The patterns of relative ratio of each components was essentially same in each cultivation system. In corn monocrop., the percentages of stalk, leaf and ear at final harvesting stage were 22.9, 13.7 and 63.4, respectively. 3. Dry matter yield per unit area (33kgIlOa) of intercropped corn at yellow stage was similar to that of monocropped corn ( l,482.8kg/ 10a vs 1 ,SO8.9kg/ 10a). At ripe stage, however, the DM yield of intercrop. was higher than that of monocrop. (1,810.4kg/lOa vs 1,660.4 kg/ 1 Oa). 4. The same pattern was observed in organic matter yield.

• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.32-37
• /
• 2005

Hose bands, which are used in LPG (Liquefied Petroleum Gas) or LNG (Liquefied Natural Gas) facilities for home use to join low pressure hoses with fuse-cocks (or regulators), should give a tight connection to prevent a gas leakage from hose connection parts. In this paper, hydraulic pressure tests and pull force tests were carried out to evaluate the performance and swaging length of hose bands. Experimental results showed that the swaging force of ear type bands were higher than those of spring bands and also showed that the optimal swaging length was about 1${\~}$2 mm from the hose end.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.158-164
• /
• 1988

The growth characteristics and yield per unit area of two cropping systems, corn monoculture and 'wrnsoybean intercropping, were compared and the obtained results were as follows; 1.The two cultivation systems were not significantly different in leaf length, leaf width and length of internode at harvesting time. 2.The weight of stalk and the leaves of a plant were decreased with maturity, while the weight of ear was markedly increased. The patterns of relative ratio of each components were essentialy same in each cultivation systems. In corn monoculture, the percentages of stalk, leaf, and ear at final harvesting stage were 22.9, 13.7, and 63.4 and in corn-soybean intercropping, they were 21.8, 10.9, and 67.3 respectively. 3.Dry matter yield per unit area (kg/lOa) of intercropped corn at yellow stage was similar to that of monocultured corn (1, 483 kg/ 10a vs 1, 509 kg/ 10a). At ripe stage, however, the dry matter yield of intercropped plant was more than that of monocultured (1, 679 vs 1, 660 kg/ 10a). 4.The same pattern was observed in organic matter yield.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.397-400
• /
• 2006

The objectives of this experiment was to evaluate the effect of seeding and transplanting date on yield and quality of rapeseed experiment were conducted in the research field of Chungcheongnam Do(Taejun) Agricultural Research and Extension Services with Yudal, one of the rapeseed cultivar of different growth characteristics among the six treatments were examined and recorded. Results showed that yield components such as plant height, length of ear and pod, number of branches and pods and percentage of pod setting and seed set were highest at the plot with direct seeding in Sep. 10. In this treatment yield of seed, 1,000 grains weight and weight of $1{\ell}$ were highest. On the basis of vegetative and yield parameter of direct seeding in Sep. 10 was the best sowing date of rapeseed crop in Chungcheongnam Do region of Korea. Experiments were conducted in the research field of Chungcheongnam Do(Taejun) Agricultural Research and Extension Services with Yudal variety, which showed different growth characteristics. Yield components such as plant height, length of ear and pod, number of branches and pods and percentage of pod setting and seed set were highest at the plot with direct seeding in Sep. 10. Yield of seed, 1,000 grains weight and weight of $1{\ell}$ were highest at the direct seeding in Sep. 10. Judging from the results reported above, seemed to be direct seeding in Sep. 10.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.312-318
• /
• 2014

We evaluated the morphological characteristics of 156 maize inbred lines, which were developed to breeding normal maize variety at Maize Experiment Station, Gangwon Agricultural Research and Extension Services, by examining 11 quantitative and three qualitative characteristics. On the evaluation of three qualitative traits for 156 maize inbred lines, most inbred lines showed yellow (85 and 84 inbred lines) at tassel color (QL1) and silk color (QL2), and showed semi erect (105 inbred lines) at plant type (QL3). While, the evaluation of 11 quantitative traits for 156 maize inbred lines, they showed the morphological variation in days of tasseling (QN1, 56.5 to 76.0 days), days of silking (QN2, 59.0 to 85.5 days), stem thickness (QN3, 12.7 to 42.9 mm), plant height (QN4, 111.8 to 239.8 cm), ear height (QN5, 48.2 to 126.5 cm), 100 kernel weight (QN6, 14.9 to 36.4 g), ear length (QN7, 10.0 to 79.0 cm), setted kernel length (QN8, 8.0 to 70.5 cm), ear thickness (QN9, 4.0 to 22.0 cm), total kernel weight (QN10, 22.0 to 490.0 kg) and water content (QN11, 9.3 to 11.9%), respectively. As a result, 11 inbred lines (00hf3, 00hf19, 00hf30, 00hf36, 02S8069, 02S8072, 02S8090, 02S8099, 05S10011, 06S8085-6, 07S8011) in the 156 normal maize inbred lines have showed comparatively high values. While, the results of PCA (principal component analysis) indicated that the ear length (QN7), setted kernel length (QN8), ear thickness (QN9) and total kernel weight (QN10) greatly contributed in positive direction on the first principal components. And also, days of tasseling (QN1), days of silking (QN2), plant height (QN4) and ear height (QN5) contributed in negative direction on the second principal component. Thus these morphological characters, which were greatly contributed in the first and second principal components, might be considered to be useful for discrimination among 156 normal inbred lines. Specifically, this study's assessment of morphological characteristics of 156 normal inbred lines will be helpful useful for normal maize breeding programs such activities as planning crosses for hybrid and line development at Maize Experiment Station, Gangwon Agricultural Research and Extension Services.