• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.79-86
• /
• 2014

이 연구는 표면매입 보강된 FRP 판과 콘크리트사이의 응력전달기구를 이론적으로 연구한 것으로서 이선형 부착모델을 이용하여 부착거동을 묘사하고 이를 실험 결과와 비교하여 신뢰성있는 해석방법을 제시하였다. 연구로부터, 표면매입된 FRP 판과 콘크리트사이의 계면특성을 고려한 미분방정식에 이선형 부착-미끄러짐 관계곡선을 사용하여 해석할 경우, 모델의 임계값인 최대전단강도와 미끄러짐 변위, 그리고 박락에 의한 연화거동이 시작될 때의 변위값 선정과정이 제시되었다. 또한 제안된 모델을 사용하여 부착길이가 다르게 보강된 표면매입 FRP 판의 미끄러짐 거동을 해석한 결과 실제 거동을 매우 근사하게 묘사할 수 있는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.89-98
• /
• 1997

Compression waves propagating in a high speed railway tunnel impose large pressure fluctuations on the train body or tunnel structures. The pressure fluctuations can cause ear discomfort for the passengers and increase the aerodynamic resistance of trains. As a fundamental research to resolve the pressure wave phenomenon in the tunnel, a steady theory of Chester-Chisnell- Whitham was applied to a simple shock tube with a sudden cross-sectional area reduction to model trains inside the tunnel. The results of the present theoretical analysis were compared with the experiments of the shock tube. The results show that the reflected compression wave from the model becomes stronger as the strength of incident compression wave and the blockage ratio increase. However, the compression wave passing through the model is not strongly dependent on the blockage ratio. The theoretical results are in good agreement with the experiments.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.211-217
• /
• 2011

This paper proposes a quasi-optimal linear DOA (Direction-of-Arrival) estimator which is necessary for the development of a real-time robot auditory system tracking moving acoustic source. It is well known that the use of conventional nonlinear filtering schemes may result in the severe performance degradation of DOA estimation and not be preferable for real-time implementation. These are mainly due to the inherent nonlinearity of the acoustic signal model used for DOA estimation. This motivates us to consider a new uncertain linear acoustic signal model based on the linear prediction relation of a noisy sinusoid. Using the suggested measurement model, it is shown that the resultant DOA estimation problem is cast into the NCRKF (Non-Conservative Robust Kalman Filtering) problem [12]. NCRKF-based DOA estimator provides reliable DOA estimates of a fast moving acoustic source in spite of using the noise-corrupted measurement matrix in the filter recursion and, as well, it is suitable for real-time implementation because of its linear recursive filter structure. The computational efficiency and DOA estimation performance of the proposed method are evaluated through the computer simulations.

• 대한한방내과학회지
• /
• 제43권4호
• /
• pp.503-513
• /
• 2022

Objectives: The antitussive, expectorant, and anti-inflammatory effects of Mahwangyounpae-tang (MHYPT) aqueous extracts were observed in appropriate animal models of various respiratory disorders. Methods: MHYPT aqueous extracts were orally administered once a day for 11 days at dose levels of 400, 200, and 100 mg/kg. The effect of MHYPT was determined by comparing its antitussive effect with theobromine (TB), its expectorant effect with ambroxol (AM), and its anti-inflammatory effect with dexamethasone (DEXA). Results: MHYPT aqueous extracts (400 mg/kg) showed favorable antitussive effects comparable to those of TB (50 mg/kg) in the NH₄OH-exposure coughing mouse model and expectorant effects comparable to those of AM (250 mg/kg) in the phenol red-secretion mouse model, but MHYPT (400 mg/kg) showed less anti-inflammatory activity compared to DEXA (1 mg/kg) in the xylene-induced acute inflammatory mouse ear model under the experimental conditions used. Conclusion: MHYPT aqueous extracts administered at dosage levels of 400, 200, and 100 mg/kg induced dose-dependent and favorable antitussive, expectorant, and anti-inflammatory activities that occurred by simultaneous modulation of the activity of mast cells and respiratory mucous production under the experimental conditions used in this study.

• 전자공학회논문지SC
• /
• 제41권5호
• /
• pp.71-78
• /
• 2004

체내에 이식되는 완전 이식형 인공중이 시스템의 제어를 위해 저전력 마이크로프로세서인 MSP430을 이용한 적외선 리모컨형 외부제어기를 설계하였고, 수신된 신호 해석을 위한 제어 알고리즘을 설계하여 전원 ON/OFF와 소리크기 UP/DOWM 동작을 수행하도록 하였다. 먼저 피부 투과시 발생하는 적외선 신호의 반사 및 투과모델을 이용하여 시스템에 필요한 적외선 LED 방사강도를 계산하고, 인반 적외선 리모컨과의 오작동을 방지하기 위해 고유의 데이터 프로토콜을 설정하였다. 이식되는 수신부의 적외선 수신모듈은 자체 소비전류를 줄이기 위해 마이크로프로세서의 내부 타이머에 의한 25% 듀티비를 갖는 출력신호를 전원으로 사용하였다. 4mm 두께의 돼지피부를 이용한 피부투과 전송실험을 실시하여 구현된 송수신 장치로 신호가 전달됨을 확인하였다.

• Archives of Plastic Surgery
• /
• 제42권2호
• /
• pp.150-158
• /
• 2015

Background Fat is widely used in soft tissue augmentation. Nevertheless, it has an unpredictably high resorption rate. Clinically, external expansion with negative pressure is used to increase fat graft survival. In this study, fat graft recipient sites were preconditioned by external application of negative pressure in order to test for improvements in vascularity and fat graft survival. Methods Negative pressure was applied randomly to either the left or right dorsal ear of 20 New Zealand male white rabbits at a pressure of -125 mm Hg. The negative pressure was removed one week after the skin perfusion was measured. The skin flap at each ear was elevated, and 1 g of fat was grafted above the dorsal perichondrium. After one week, the fat weight, microvessel density, mature vessel density of the skin and fat, and amount of glycerol released were measured. Three months after the grafting, the same measurements were performed, with the exception of glycerol release. Results The fat survival rate of the experimental group ($75.4%{\pm}3.9%$) was higher than that of the control group ($53.1%{\pm}4.3%$) (P<0.001). Skin perfusion was higher in the experimental group. The glycerol release in the experimental group was significantly higher than in the control. The microvessel density of the skin and fat was significantly higher in the experimental group. Three months after the grafting, the skin and fat mature vessel density was significantly higher in the experimental groups. Conclusions Negative pressure prior to fat grafting increased the vascularity of the recipient site, and, accordingly, enhanced fat graft survival.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.592-600
• /
• 2006

Purpose: Numerous materials, both autologous and nonautologous, have been used for augmentation of sunken areas, but they have their own limitations. The purpose of this study is to determine the histologic response and volume change of the xenogenic collagen-based scaffold($Terudermis^{(R)}$) to the transfer into a subcutaneous soft tissue location in vivo rabbit model. Methods: Eighteen New Zealand white rabbits were used. Three $1.2{\times}1.2cm$ sized subcutaneous pockets were created on the dorsal surface of each ear. $1{\times}1cm$ sized collagen matrix($Terudermis^{(R)}$) and autologous dermal graft were implanted into each pocket. Full thickness of ear was harvested in 3 days, 1, 2, 4 weeks, 3, 6 months after implantation. Results: Histological analysis of implants demonstrated progressive neovascularization, fibroblast infilteration, neocollagen bundle synthesis and organization, and few foreign body reaction. The thickness of the collagen matrix in 3 days after the operation was 87.69% of the thickness of the collagen matrix in wet state. Then it decreased to 30.17% in 6 months after the operation. The rate of decrease was similar at all points at the same time compared with autologous dermal graft. Conclusion: Our experimental study suggests that $Terudermis^{(R)}$ could be a safe material as an implant for permanent augmentation in subcutaneous tissue. However the choice of graft for augmentation should be remained to the clinical situations.

• 한국작물학회지
• /
• 제36권1호
• /
• pp.52-56
• /
• 1991

인산흡착력이 매우 크고 유효인산함량이 낮은 제주도 화산회토에 있어서 단옥수수 적정인산시비량을 밝히고자 1986년 제주(제주통)와 서귀포(남원통)에서 인산시비량( 0, 8, 16, 24, 32kg/10a)에 따른 단옥수수 교잡종 Golden Cross Bantam 70의 생육 및 수량을 조사한 결과를 요약하면 다음과 같다. 1. 출사일수는 무인산구에서 보다 인산 16kg/10a 이상 시용에 의하여 1～2일 단축되었다. 2. 간장, 착수고, 10a당 생간엽 수량은 두 지역간 유의한 차이가 없었고, 인산시비량이 많을수록 직선적으로 증가하였다. 3. 상품성 있는 이삭의 정균 길이 및 무게는 서귀포에서 보다 제주에서 컸었고, 인산시비량이 많을수록 큰 경향이었다. 4. 주당 또는 10a당 상품성 있는 이삭수, 10a당 이삭수량은 두 지역간 유의한 차이가 없었고, 인산시비량이 많아짐에 따라 이차곡선적인 증가를 보였다. 인산시료와 단옥수수 가격을 고려한 적정인산시비량은 약 26kg/10a로 추정되었다.

• Environmental Engineering Research
• /
• 제21권4호
• /
• pp.384-392
• /
• 2016

The aim of this study was to investigate the removal efficiency of $17{\alpha}$-methyltestosterone (MT) from aqueous solution by Salvinia cucullata Roxb. ex Bory in an active plant-based reactor with a specific focus on linear regression analysis for the sorption phenomena of MT onto the plant roots. A high performance liquid chromatographic method using UV detection (245 nm) was used to analyse the samples. The batch experiments of the active plant reactor (APR) were established to investigate the ability of Salvinia cucullata to remove MT from the liquid phase. The results revealed that 40% and 60% removal of MT from the liquid phase was observed at 5 min. and at 4 h, respectively. Salvinia cucullata can effectively remove MT from the aqueous solution in APRs. Kinetic studies revealed that the sorption phenomena of MT by Salvinia is best described using a linearized pseudo - second order model. Based on the kinetic parameters, it is likely that during the first 4 h of the contact (t = 0 to t = 4 h) sorption is the major driving mechanism of the disappearance of MT from aqueous solutions. However, at higher MT concentrations, diffusivity of MT has a significant effect on the migration of MT from the bulk stream to the root surface. The isotherm analysis revealed that the sorption kinetics favourably followed pseudo second-order. The results of isotherm analysis have indicated that the sorption of MT onto the root surfaces of Salvinia cucullata was favourable and almost irreversible.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.89-98
• /
• 2015

PURPOSES : The objective of this study is to evaluate the performance properties of chip seals and fog seals with polymer-modified emulsions. METHODS : The performance of chip seals and fog seals was evaluated on the basis of common issues in surface treatments. Granite aggregate and four types of asphalt emulsions (one of the unmodified and three of the modified emulsions) were used considering the usage in field. A Vialit test was performed to determine the aggregate retention, and the MMLS3 (Third Scale Model Mobile Load Simulator) test was conducted to determine the aggregate retention, bleeding, and rutting. In addition, the fog seal specimens were tested by the BPT (British Pendulum Test) to evaluate skid resistance. RESULTS AND CONCLUSIONS : Overall, the polymer-modified emulsions (PMEs) showed better aggregate retention and bleeding resistance for both chip seals and fog seals. When comparing the performance of the PMEs, the difference was not considerable. In addition, PMEs present significantly better rutting resistance than unmodified emulsions. For skid resistance, if the recommended mix design is applied, the specimens do not cause issues with skid resistance. Although all of the fog seal specimens were over the criteria for skid resistance, the specimen fabricated by the high emulsion application rate (EAR) of the unmodified emulsion was nearly equivalent to the skid value criteria. Therefore, the use of an unmodified emulsion with a high EAR should be carefully applied in the field.