• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.206-209
• /
• 2016

High end commercial communication system, such as contemporary mobile technology (CDMA, LTE, Wi-FI, etc.) and extension of frequency band, may affect the performance of the shipborne electronic support measurement system in modern battle field. In this paper, we suggest a way to improve the performance of electronic warfare system based on direction finding algorithm simulation after discussing the limits of traditional system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.369-378
• /
• 1993

현대의 극심한 경쟁체제속에서 제조업체의 생존여부는, 얼마나 좋은제품을 신속히 시장에 출시하느냐에 달려있으며, 이러한 경쟁력을 갖추기 위해서는 제품개발에 관련된 각종정보의 부문간 공유 및 흐름의 제어가 그 성패의 관건이라 할 수 있다. 따라서 본 연구의 목적은 삼성전자의 제품개발과정에서 발생되는 모든 기술정보를 효율적으로 관리할 수 있는 체계를 확립하고, 이 체계를 System적으로 구현하여 각종 기술정보를 생성하고, 조회하는 개발자들의 현업에 이 System을 적용하고자 하는데 있다. 본 연구에 사용된 개발 Tool은 X-terminal과 HP EWS이었고, 실제 사용자들의 운용기종은 선진각국의 Server & Client추세에 따라, DB Server로는 HP9000/865S를 채택하고, Client로는 HP EWS, X-terminal, PC386등의 기종을 적용하였다. 또한 개발언어는 'C'language를 사용하였고 DBMS는 IBM MIS와의 연계를 위해, Oracle을 이용하였다. 본 연구의 결과로써 나타나는 효과는, 외형적으로 각종 기술정보의 공유로 인한 설계품질향상과 개발 납기 단축이라 할 수 있으며, 그 내면에 있는 개발관련 각종자료 및 업무의 표준화와 도면관리System의 개발 기술확보 또한 중요한 성과라 할 수 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.366-368
• /
• 2006

Electronic warfare Support(ES) system measures pulse characteristics for received RF signals that received from all directions. ES system discriminates the pulse trains that have a rule, correlationship, continuance from collected data and analyze the characteristics of the data, and identify the emitters by comparison with emitter identification data(EID). Because pulse density is very high and various signal source exists at modem signal environments, high-speed and accurate signal analysis is needed for realtime countermeasure to emitters. Grouping alleviates the load of signal analysis process and supports reliable analysis. In this paper, we suggest an adaptive clustering scheme regarding signal patterns.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.137-144
• /
• 2016

In this paper, the performance of ranging measurement, which is generated using two receiver clock offsets in one receiver, was analyzed. A spoofer transmits a counterfeited spoofing signal which is similar to the GPS signal with hostile purposes, so the same tracking technique can be applied to the spoofing signal. The multi-correlator can generate two receiver clock offsets in one receiver. The difference between these two clock offsets consists of the path length from the spoofer to the receiver and the delay of spoofer system. Thus, in this paper, the ranging measurement was evaluated by the spoofer localization performance based on the time-of-arrival (TOA) technique. The results of simulation and real-world experiments show that the position and the system clock offset of the spoofer could be estimated successfully.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.839-840
• /
• 2013

In most EW ES equipment, S/W is developed before H/W development. The important thing is the validity of S/W algorithm should be tested before the integration between H/W and S/W. For S/W-alone test, the digital threat signal generation for the signal analysis system is needed. This paper is proposing the simulated IF signal generation which is similar with the real signal.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.83-94
• /
• 2008

The Pungcheon-myeon, Andong, consists mainly of Precambrian metamorphic rocks, Jurassic igneous rocks, Cretaceous sedimentary rocks (Hasandong, Jinju and Iljik Formations) and Cretaceous igneous rocks (gabbroic rocks, dykes), in which several major faults are developed; Andong fault of ENE trend, which is the boundary fault of the Cretaceous Gyeongsang Basin and the Precambrian-Jurassic basement (Yeongnam Massif), Namhu fault parallel to it, Maebong fault of NNW direction, bow-shaped Gwangdeok fault of ENE direction which is convex toward SSE direction, and Hahoe fault of NNE direction. This paper is researched the geological structures around these major faults by means of the detailed geometric analysis on beddings, joints, faults and drag folds. As a result, a reverse slip faulting of top-to-the SSE movement accompanied with a regional drag folding is recognized from the arrangement of bedding poles measured around the Gwangdeok and Hahoe faults at its northeastern extension, and a zone of Gwangdeok drag fold of 150-300 m width, which is wider at the central and eastern parts of Gwangdeok fault and narrower at its western part and Hahoe fault, is also defined. It indicates that the Hahoe and Gwangdeok faults are a single fault and their movements are coeval unlike the results of earlier reasearchers. And, In this area are recognized two types of faults [(E)NE${\sim}$EW(fault I), WNW${\sim}$NNW (fault II), trending faults] and four types of joints [EW (I), (N)NW (II), NNE (III), NE (IV) trending joints]. These fractures were formed at least through four different events, named as Dn to Dn+3 phases. (1) Dn phase; the formation of joint (I) (Gwangdeok joint) and the intrusion of acidic dykes of EW trend under the compression of EW direction. (2) Dn+1 phase; the formations of joint (II) (Maebong joint), lens-shaped boudinage of acidic dykes, oblique-slip reverse fault (Fault I-Gwangdeok fault) under the compression of (N)NW direction, and the formation of regional zone of Gwangdeok drag fold accompanying the Gwangdeok faulting. (3) Dn+2 phase; those of joint (III), Fault II (Maebong fault) by dextral strike-slip movement of Maebong joint under the compression of NNE direction, and the extension cutting of Dn+1 structures due to the Maebong faulting. (4) Dn+3 phase; the jointing (IV) and the reactivation of Fault II as oblique-slip type with predominant dextral motion which took place under the compression of NE direction. It also suggests that the Maebong fault is not a tear fault deveolped during thrust tectonics of the Andong and Gwangdeok faults but is a post-fault during different tectonic event.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.241-247
• /
• 2016

This paper proposes the design and measurement of a 6-18 GHz front-end receiver module that has been combined into a one- channel output from a two-channel input for electronic warfare support measures (ESM) applications. This module includes a limiter, high-pass filter (HPF), power combiner, equalizer and amplifier. This paper focuses on the design aspects of reducing the noise figure (NF) and matching the phase and amplitude. The NF, linear equalizer, power divider, and HPF were considered in the design. A broadband receiver based on a combined configuration used to obtain low NF. We verify that our receiver module improves the noise figure by as much as 0.78 dB over measured data with a maximum of 5.54 dB over a 6-18 GHz bandwidth; the difference value of phase matching is within $7^{\circ}$ between ports.

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.97-103
• /
• 2010

It has been recognized that the risk from the vulnerability of GPS can lead to the extreme damage in the infrastructure of the civil and military in recent years. As an example, the intentional interference to GPS signal, named GPS jamming, was really performed to misguide GPS guided weapons during Iraq war in 2003, and the fact has also followed by the serious issues on GPS in civilian community. In the modernized military society, the navigation warfare(NAVWAR) based on the GPS jamming has been emerged and introduced as a military operation. The intentional interference to the future global navigation satellite system(GNSS) involving GPS must be also an important issue to civilian users in near future. This study is focused on the fundamental research prior to the research on "Potential principle of NAVWAR" under NAVWAR of the future warfare. In this paper, we would study on the investigation of NAVWAR based on electronic warfare(EW) and analyze characteristics of the jamming against GNSS's receivers. Then the general mechanism on GNSS jamming is proposed.