• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1600-1602
• /
• 2007

TPS (Temperature Programmed Sublimation) technology is known to research for the plane evaporation of the organic film.[5] Using TPS technology, the plane source evaporation of NPB organic film has been studied for the first time. The NPB organic film consists of nano scale film phase and bulk phase on a substrate. The 400 ${\AA}$ in film phase thickness of NPB sublimates at the $175^{\circ}$ of the Ta made metal plate. It was proved that the sublimation temperature of the organic film has much lower than that of the organic powder. ($130^{\circ}$ is lower for Alq3 and $90^{\circ}$ is lower for NPB.)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1171-1174
• /
• 2008

We studied the properties of vapor flux distributions of nozzle shaped thermal evaporation sources and the factors, which can change the flux distributions such as nozzle structure. We used a simulation and experiment methods for this study. By using the results of our study, we improved the Circular Nozzle Source, which can make uniform thin films without substrate rotation, into more efficient source.

• Water for future
• /
• v.5 no.2
• /
• pp.44-48
• /
• 1972

This article includes hydrometeorological analysis of evapotranspiration and precipitation, which are used available basic data for a certain basin water budget. Evapotranspiration on water surface, bare soil and rice fields is directly measured by Thornthwaite's type Lysimeter and on water surface and vegetables computed using the Penman's equation. Areal precipitation is analized through the Thiessen method and arithmatic mean method. It is interested fact that the correlation coefficient for Class A Pan's evaporation vs. the actual evapotranspiration is the highest value among the coefficients for different type evaporimeter and Penman equation, and evaporation ratio on rice field's evapotranspiration vs. Class A Pan's evaporation is 1. 5-2. 3.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.34-34
• /
• 1993

세라믹 분리막은 유기질 막에 비하여 열적, 기계적 및 화학적으로 안정하기 때문에 기존의 유기질 막을 사용하기 어려운 작업 조건 하에서도 응용의 잠재성을 가지고 있다. 본 실험은 disk형태의 다공성 $Al_2O_3$ 담체위에 CVD 법과 Evaporation Oxidation 법에 의해 $Al_2O_3$를 코팅하여 세라믹 분리막을 제조하였다. CVD법에 의한 제조는 Al-isopropoxide를 350$\circ$C에서 담체위에 증착시켜 제조하였으며, Evaporation-Oxidation 법에 의한 제조는 Al을 담체위에 evaporation 시킨 후 dry oxidation 시켜서 제조하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.930-932
• /
• 2007

In order to understand the doping control for the belt source evaporation, the Alq3 and NPB were codeposited on the Ta plate to re-sublimate. The very slow heating $(0.1^{\circ}C/s)$ of the Ta plate shows the separated rate signals of Alq3 and NPB sublimated from the Alq3-mixed NPB organic film on Ta plate. The ratio of the vapor rates of Alq3 and NPB was measured as same as that of each sublimation rates. Therefore, the doping control of the belt source evaporation is of the ratio of the vaporization rates of host and dopants.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.186-189
• /
• 2007

The organic deposition chamber has been developed using belt source evaporation techniques for the first time. The deposition chamber is consisted of the belt source, organic vapor source, and the mask alignment assembly. The rollers operate for the thin metal belt to continuously move with the automatic tension control. It has been proved for the belt source evaporation easy to operate and the alignment of the substrate/shadow mask becomes so simple to use in AMOLED manufacturing industry.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.12-13
• /
• 2007

OLED는 유기물을 이용한 진공 증발 증착법(Evaporation)에 의해 제조하고 있으며, 2세대 기판을 사용하고 있는 현재의 개념으로는 유기물 증착 효율이 수 %에 그치고 증착속도도 수 A/s로 상당히 낮다. OLED 제조의 생산성을 향상하기 위해서 증착속도로 10A/s이상, 제조 단가를 줄이기 위해 재료의 효율도 30% 이상으로 향상시킬 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1246-1252
• /
• 1993

Coal-Water slurry (CWS) is a new potential form of fuel for use in power plants and industrial furnaces. The evaporation and ignition characteristics of CWS have been studied in the post-flame region generated by a flat flame burner. Individual droplets with initial diameters of 1-3mm were supported around the thermocouples and raidly exposed to a hot gas stream. The gas temperature ranged between $950^{\circ}C$ and 1600.deg. C at atmospheric pressure. The effect of droplet size, gas temperature and radiative heat transfer by screen were studied experimentally. The ignition criterion was either a rapid temperature rise in time-temperatuire curves or onset of visible flame in experiment. Incresing the gas temperature or decreasing the droplet size reduced the time required for evaporation and ignition.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.169-174
• /
• 2000

TAO system was applied to treatment of piiggery slurry. In the experiments, the volume of influx was differentiated in four types. The features of operation, evaporation rate, and efficiency of successive treatment were drawn. The results are; 1. During the operation, the inside temperature was maintained at over $60^{\circ}C$ with the highest $70.2^{\circ}C$. 2. The evaporation rate of influx volume was 31.4%. And the evaporation volume of per square meter was $108{\;}\ell/\textrm{m}^2$; slightly different from $120{\;}\ell/\textrm{m}^2$ of batch type. 3. The VFAs was decreased by 95% (from $1,538lmg/{\ell}$ in influx to $72.9mg/{\ell}$ in Efflux). Thus, successive operation of TAO system is considered to be possible.

• Journal of ILASS-Korea
• /
• v.1 no.3
• /
• pp.29-36
• /
• 1996

The present study systematically investigates the effect of evaporation rate on the combustion characteristics and the flame stabilization in a gasoline engine. A constant volume combustion chamber was used to elucidate a basic combustion characteristics and the premixer was installed to control temperature and equivalence ratio. And the maximum pressure, combustion duration and flame propagation according to the evaporation rate were measured to determine the optimal temperature range for evaparating a gasoline fuel. These experimental results indicate that the combustion characteristics such as combustion chamber pressure and combustion duration were deteriorated by decreasing surrounding temperature of fuel injected. It was also found that the overall gasification process for gasoline fuel was strongly influenced by a combustion chamber temperature rather than a premixer temperature.