• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.232-237
• /
• 2009

본 연구는 일반적으로 이용되는 EVA 필름과 비교하여 폴리올레핀(PO), 불소, 방적, 방무, 보온필름 등의 기능성필름이 토마토의 품질에 어떤 영향을 미치는 가를 구명하고자 하였다. 분광투과특성에 있어 자외선은 불소필름이 가장 많았고 PO필름이 가장 적었으며, PAR는 불소, 보온, PO필름 등이 많았으며, 근적외선도 EVA에 비해 기능성필름이 많은 경향이었다. 전체광선의 투과율은 불소, 방무, 방적, PO, 보온, EVA 순으로 높았다. 하우스 내 주간온도는 광투과율 차이에 의해 불소필름이 가장 높고 EVA가 가장 낮았으며, 야간온도는 필름이 두꺼운 방적 및 PO필름이 가장 높게 유지되었다. 기능성필름은 EVA에 비해 과실 당도가 $0.2{\sim}0.5^{\circ}Bx$ 더 높았고, 과실 내 라이코펜 함량이 $15{\sim}30%$ 높게 나타났다. 따라서 토마토의 당도, 라이코펜 함량 등의 품질향상을 위해서는 일반필름 대신에 기능성필름을 이용하는 것이 효과적일 것으로 판단되었다.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.24-31
• /
• 2008

본 연구에서는 EVA 에멀젼에 내수성 및 기계적 특성을 향상시키기 위하여 금속 이온 가교제인 calcium hydroxide 및 magnesium carbonate를 사용하여 이온성 가교결합을 도입하였다. EVA 에멀젼 필름의 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다. 금속 이온 가교제 양이 증가함에 따라 EVA 에멀젼의 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 그러나 EVA 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Calcium hydroxide 0.4% 그리고 magnesium carbonate 0.5%를 첨가한 경우가 EVA 에멀젼에 강한 이온성 가교결합이 형성되어 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였다. 그러므로 본 연구에서 calcium hydroxide 및 magnesium carbonate와 같은 금속 이온 가교제가 EVA 에멀젼의 내수성과 기계적 물성을 향상시킴을 확인하였다.

• 생물환경조절학회지
• /
• 제10권3호
• /
• pp.141-147
• /
• 2001

주요 플라스틱 필름하우스 피복재의 광학 및 물리적 특성을 구명하고자 시설재배농가에서 일반적으로 이용하는 EVA(ethylene vinyl acetate, 0.08 mm) 필름을 비롯하여 기능성 피복재인 PO 방무필름(polyorefine antifog film. 0.1 mm), 불소필름(fluoric film, 0.06 mm), 산광필름(diffused film, 0.15 mm), PO 방적필름 (polyorefine antidrop film, 0.15 mm) 등과 경질 소재인 PET(polyethylene terephthalate, 0.5 mm)등 6종의 필름을 1997년에 폭 5.4m 길이 18.5m, 높이 2.9m의 소형 플라스틱필름 하우스에 각각 피복하고 3년간 (1997~1999) 필름들의 주요 특성을 조사하였다. 피복 후 30개월 경과시의 필름의 분광투과특성은 UV(300~400nm)가 산광 및 PET 필름에서 25~26% 밖에 투과되지 않은 반면, 불소필름에서는 76%, 기타 필름에서는 63~66% 투과되었다. PAR(광합성유효광, 400~700 nm)의 투과율은 불소(86.5%), 방적(80.5%), PET(76.3%), 방무(75.5%), EVA(74.1%), 산광필름(61.9%) 순으로 투과량이 많았다. 피복 후 7일경과 30개월경간의 PAR 투과율의 감소는 EVA가 12%로 가장 컸으며 방적필름이 6%로 가장 작았다. 토마토 작물군락하의 광도는 EVA 필름에 비해 산광필름에 비해 산광필름이 2.5배, 방적필름과 PET가 1.4배 각각 높았다. 필름의 인장저항력은 불소필름이 경질 소재이므로 월등히 강하였으며 다음으로 방적과 산광필름도 강한 경향이었다. 한편 충격저항력은 불소필름이 가장 약했고 방적과 산광필름은 강한 편이었다. 하우스내의 주간온도는 광투과율의 경향과 비슷하였으나, 야간온도는 PET, 불소, 방적, 산광, 방무, EVA 순으로 높았는데 특히 PET는 EVA보다 평균 4$^{\circ}C$ 높게 유지되었다. 하우스내로 투입된 일사량은 EVA 보다 불소필름 32%, 방적필름 15% PET 11%, 방무필름 4% 각각 많았는 반면, 산광필름은 7% 적었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.97-101
• /
• 2005

High strength concretes utilizing EVA with micro particles were prepared by varying polymer/binder mass ratio and curing conditions with a constant water/binder mass ratio of 0.3. The EVA modified concretes on the compressive and flexural strength, microstructure, ultrapulse modulus in curing condition(dry and water curing) were studied. Also, scanning electron microscope analysis(SEM) was performed to reveal the presence of polymer film and cement hydrates in the concrete. The compressive strength of the EVA modified concretes cured at water conditions ere higher than that of the EVA modified concretes cured at dry conditions. But, the flexural strength of the specimens cured at dry conditions were higher than that of the specimens cured at water conditions. Due to the interaction of the cement hydrates and polymer film, an interpenetrating network originated in which the aggregates were embedded. The curing of the polymer modified concrete involves two step of cement hydrates and polymer modification, and cement hydrates was promoted in water conditions and polymer film formation take place when water evaporates and was thereby was favored in dry conditions. By SEM analysis, influences of polymer modification was strengthening of the transition zone between the aggregate and the paste, and the porosity of transition zone decreases. By spring analysis, it could known that polymer film affects in porosity decrease and strengthening of transition zone.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.206-211
• /
• 2016

Experimental error sources for thermogravimetric analysis (TGA) of poly(ethylene-co-vinyl acetate) (EVA) were investigated and sample preparation method to reduce the experimental error was suggested. Maximum dissociation temperatures of EVA for the first and second dissociation reactions ($T_{m1}$ and $T_{m2}$, respectively) were measured. By decreasing the weight of raw EVA, the $T_{m1}$ increased but the the $T_{m2}$ decreased. When weight of the raw EVA was over 10 mg, the TGA curve showed abnormal behaviors. The abnormal TG behaviors were explained by gathering and instantaneous evaporation of acetic acid formed by deacetylation of the VA unit. When TGA analysis of EVA was performed using untreated (raw) EVA, the experimental errors were about 1%. In order to eliminate the abnormal TG behaviors and to reduce the experimental errors, EVA film made by solvent casting was used. For the treated EVA (EVA film), the abnormal TG behaviors did not appear, the $T_{m1}$ decreased by about $2^{\circ}C$ but the $T_{m2}$ increased by about $6^{\circ}C$, and the experimental errors were reduced by 0.5%.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.190-198
• /
• 2018

We fabricated high transmission and high scattering poly(ethylene-co-vinyl acetate)(EVA) films embedding $SiO_2$ nanoparticles to improve outcoupling efficiency in organic display. The 800nm diameter $SiO_2$ nanoparticles aggregated and formed $1.56{\mu}m$ (with ${\pm}0.853{\mu}m$ standard deviation) diameter microparticles in EVA. The total transmission of scattering film was 83.3% on Polyethylene terephthalate(PET), which was higher than reference 82.8% PET substrate. The diffuse transmission and haze of the $SiO_2$ embedded EVA film were 76.1% and 91.4%, respectively. The optimized condition was 1:1 weight ratio of $SiO_2$ nanoparticles to EVA in Tetrahydrofuran(THF) solution. When the ratio of $SiO_2$ was larger than 1, the total transmission decreased by the increase in backscattering of light due to high scattering. With the optimized condition, we could succeed to fabricate a large scale film(35m in length) with a roll-to-roll process.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.123-127
• /
• 2005

EVA Powder modified high strength concretes were prepared by varying polymer/binder mass ratio with a constant water/binder mass ratio of 0.3. The effect of EVA powder on the slump, hydration heat, compressive and flexural strength, toughness and water absorption ratio was studied. In hydration heat test, temperature of hydration reaction displayed almost fixed level regardless of containing rate of EVA powder, but peak time of hydration reaction displayed late inclination as containing rate of powder increases. With the same water/binder mass ratio, the compressive strength and water absorption of EVA powder modified concretes decreased slightly when EVA powder was added and the flexural strength of EVA powder modified concretes rised slightly when EVA powder was added. Also, the toughness of the modified concretes can be improved markedly. The interpenetrating structure between the polymeric phase and cement hydrates formed at a $2{\sim}6%$(containing rate of EVA powder). The properties of the polymer modified concretes were influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• 한국포장학회지
• /
• 제27권1호
• /
• pp.41-48
• /
• 2021

본 연구에서는 EVA/LDPE 복합소재에 OSP의 함량비를 달리한 EVA/LDPE-OSP 복합 필름을 이축압출기로 제조하였다. 제조한 복합 필름의 액티브 포장 소재로의 적용가능성을 평가하기 위해 FT-IR, DSC, TGA, OTR, WVTR, SEM, UTM 및 항균성을 분석한 결과 다음과 같은 결론을 도출하였다. EVA/LDPE-OSP 복합 필름 내 OSP 첨가는 열 안전성을 개선할 수 있었으며, OSP 함량이 높아질수록 항균성은 증가하였다. 그러나, OSP의 응집, EVA/LDPE 폴리머와 OSP 사이의 낮은 상호작용 등의 이유로 OSP의 첨가는 상대적으로 낮은 항균성과 기계적 물성, 차단특성의 저하를 확인할 수 있었다. 결론적으로 EVA/LDPE-OSP 복합 필름은 미생물에 의해 발생할 수 있는 식품의 부패를 방지하는 측면에서 긍정적인 효과를 가져올 수 있지만, 포장재로써 적용을 위해 무기입자인 OSP의 입자크기 조절, 표면처리, 상용화제 도입 등을 통한 분산성을 향상시키는 것이 필요하며 이를 통한 항균성 증진 및 필름의 물성 개선에 관한 추가 연구가 필요할 것으로 판단된다.