• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.93-94
• /
• 2013

최근 하이브리드 및 전기자동차에 대한 관심이 높이지는 가운데 전기자동차용 배터리 충전기술 또한 대두 되고 있다. 본 논문은 충전 기능 만을 고려한 단방향 충전시스템에서 방전 기능을 추가한 양방향 충전시스템에 대하여 서술한다. 양방향 시스템은 차량의 배터리를 저장매체로 활용하여 계통과 배터리간의 전력을 양방향으로 전달할 수 있기 때문에 주차된 차량등의 배터리의 잉여전력을 계통으로 전송 할 수 있다. 용량은 가정용으로써 3.3kW 탑재형 단상 양방향 충/방전기에 대한 시뮬레이션을 통해 결과를 도출했다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.163-164
• /
• 2012

본 논문에서는 EV 또는 PHEV용 탑재형 배터리 충전기에 대하여 기술한다. 역률개선을 위한 PFC는 전류연속모드의 부스트 컨버터를 적용 하였으며, 스위칭 손실의 저감을 위해 영전압 스위칭이 가능한 위상천이 풀-브리지 DC-DC 컨버터를 사용하여 전기적인 절연 및 소자의 스위칭 스트레스를 줄이고 효율 또한 향상 시키고자 하였다. PSIM을 사용하여 시뮬레이션 하였으며 실험세트를 구성하고 결과를 분석하여 시스템의 효용성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.317-319
• /
• 2019

In this paper, a three level duty cycle controlled half bridge LLC converter for EV charger application is presented. The topology and operating regions of the converter are discussed. The equations of the converter are derived in time domain. A small signal model of the converter is developed by perturbation and linearization of the steady state model about their operating point using Extended Describing function.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.56-65
• /
• 2013

The word is endeavoring to reduce greenhouse gases with the sense of crisis caused by the continuous climate change. As a method to decrease greenhouse gases, motors driven by fossil fuels are being substituted by EV in the field of transportation. Meanwhile, for the spread of EV, charging installations are divided into general charging type and quick charging type. Also, charging amount and time are main factors to decide charging pay. But, because the opportunity coast for the charging time varies depending on the private situations, it is very important to understand exact phenomenon for the spread of EV charging installations and charging pay policy. Therefore this paper suggested the choice model of charging installation and time value in various situations by using Logit model to make clear the relationship between a choice of charging installation, charging time and willingness to pay for charge.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.161-168
• /
• 2019

Recently, the development and dissemination of electric vehicles is increasing as a solution for carbon and emission reduction. In Korea, the supply of electric vehicles and the expansion of chargers are increasing rapidly every year under the supervision of the Ministry of Environment. In this paper, we study the portable smart test technology which enables quick check of charge related to faults in both electric car and charger to solve the problem of failure which is inevitable in the diffusion of electric car charger. To verify the normal operation of the communication protocol between the electric car and the charger, a hardware module and software were constructed, and a portable tester based on the international standard considering the V2G technology was developed and evaluated.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.141-142
• /
• 2011

The increase in oil prices and the rising environmental concerns are boost the electric vehicle supply. Vehicle manufactures understand this trend quite well and plan to increase the production of electric vehicle(EV) such as Nissan LEAF and GM VOLT etc.. The growth of intermittent renewable energy sources such as solar and wind power requires utilities to find additional grid coupled energy storage and regulation capacity. EVs have a battery pack and a charger. The charger can be able to deliver power back to the grid from the vehicle's battery as well as charge the battery. The concept of deploying EVs to stabilize the electric power grid is generally referred to as Vehicle-to-Grid(V2G). We present the grid service using V2G.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.975-984
• /
• 2018

This work presents a high efficiency phase shifted full bridge (PSFB) DC-DC converter for use in the second stage of a battery charger for neighborhood electrical vehicle (EV) applications. In the design of the converter, Lithium-ion battery cells are preferred due to their high voltage and current rates, which provide a high power density. This requires wide range output voltage regulation for PSFB converter operation. In addition, the battery charger works with a light load when the battery charge voltage reaches its maximum value. The soft switching of the PSFB converter depends on the dead time optimization and load condition. As a result, the converter has to work with soft switching at a wide range output voltage and under light conditions to reach high efficiency. The operation principles of the PSFB converter for the continuous current mode (CCM) and the discontinuous current mode (DCM) are defined. The performance of the PSFB converter is analyzed in detail based on wide range output voltage and load conditions in terms of high efficiency. In order to validate performance analysis, a prototype is built with 42-54 V / 15 A output values at a 200 kHz switching frequency. The measured maximum efficiency values are obtained as 94.4% and 76.6% at full and at 2% load conditions, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1860-1867
• /
• 2016

In this paper, first, a linearized modeling of a phase shift full-bridge converter used in chargers of electric vehicles is derived by using state-space approach and transfer functions from the duty ratio to output voltage and the inductor current are also verified. second, control systems for the output voltage and the inductor current are designed using the root locus technique. It is illustrated by experimental results that the control performance on the output variables is satisfied with the designed digital control system based on a automobile qualified 32-bit microcontroller.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.652-654
• /
• 2015

Integrated switched reluctance motor drive as an electric vehicle battery charger is presented in this paper. The SRM, which is used as the traction power in the driving mode, is used in the charge circuit to improve the power factor of charging system. The charging circuit can share the power switches of the asymmetric converter and phase windings of SRM to charge the battery, and can reduce the size and cost of the system in the plug-in system. To keep the rotor at standstill, zero torque control method is proposed. Since the inductances of the SRM windings are not same at any stop position, the charger controller controls the reference current to satisfy the total charging current with PFC and zero torque condition. A novel cubic equation method is proposed as a current reference distributor of the charging controller. Simulations are performed by MATLAB software and results satisfy the Effectiveness of proposed battery charging system.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2202-2211
• /
• 2016

In certain applications, such as IPT-based EV charger (IPTEC), any variation in alignment and distance between pickup and charger primary leads to a change in leakage and magnetic impedance magnitudes. The power transmission capacity is not always at the maximum level because of these variations. This study proposes a new low-cost tracking method that achieves the Maximum Inductive Power Transmission Capacity (MIPTC). Furthermore, in the proposed method, the exchange of information between load and source is not required. For an application such as IPTEC, the load detected by the IPTEC varies continuously with time because of the change in state of the charge. This load variation causes a significant variation in IPT resonant circuit voltage gain. However, the optimized charging output voltage should be kept constant. From the analysis of the behavior of the IPT circuit at different working frequencies and load conditions, a MIPTC operation point that is independent of load condition can be identified. Finally, the experimental results of a developed prototype IPT circuit test show the performance of the proposed method.