• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.371-377
• /
• 2009

Objectives: The aim of this study was to evaluate the differences in the polysomnography data between positional and non-positional obstructive sleep apnea (OSA) patients. Methods: Forty-seven patients diagnosed with OSA were evaluated using full night polysomnography. According to the criteria of Cartwright et al., the patients were classified into two groups with 37 positional (supine apnea-hypopnea index [AHI] $\geq$ 2x's the lateral AHI) and 10 non-positional (supine AHI < 2x's the lateral AHI) OSA patients, and the differences of polysomnography data between the two groups were evaluated. Results: There were no significant differences in demographic variables (age, gender, and BMI), daytime sleepiness, overall AHI, total arousal index, and percent time of snoring between two groups. However, AHI, arousal index, and mean oxygen saturation ($SpO_2$) of the REM sleep stage were significantly more severe in the positional OSA group than the non-positional OSA group. Mean $SpO_2$ and the lowest $SpO_2$ during overall sleep stage were also significantly lower in the positional OSA group than the non-positional OSA group. Conclusions: Our results of differences in the polysomnography data of REM sleep stage suggest that non-positional OSA patients may have higher collapsibility of the oropharyngeal airway during sleep than positional OSA patients.

• Journal of Oral Medicine and Pain
• /
• v.32 no.2
• /
• pp.137-150
• /
• 2007

Trees emit phytoncide into atmosphere to protect them from predation. Phytoncide from different trees has its own unique fragrance that is referred to as forest bath. Phytoncide, which is essential oil of trees, has microbicidal, insecticidal, acaricidal, and deodorizing effect. The present study was performed to examine the effect of phytoncide on Porphyromonas gingivalis, which is one of the most important causative agents of periodontitis and halitosis. P. gingivalis 2561 was incubated with or without phytoncide extracted from Hinoki (Chamaecyparis obtusa Sieb. et Zucc.; Japanese cypress) and then changes were observed in its cell viability, antibiotic sensitivity, morphology, and biochemical/molecular biological pattern. The results were as follows: 1. The phytoncide appeared to have a strong antibacterial effect on P. gingivalis. MIC of phytoncide for the bacterium was determined to be 0.008%. The antibacterial effect was attributed to bactericidal activity against P. gingivalis. It almost completely suppressed the bacterial cell viability (>99.9%) at the concentration of 0.01%, which is the MBC for the bacterium. 2. The phytoncide failed to enhance the bacterial susceptibility to ampicillin, cefotaxime, penicillin, and tetracycline but did increase the susceptibility to amoxicillin. 3. Numbers of electron dense granules, ghost cell, and vesicles increased with increasing concentration of the phytoncide, 4. RT-PCR analysis revealed that expression of superoxide dismutase was increased in the bacterium incubated with the phytoncide. 5. No distinct difference in protein profile between the bacterium incubated with or without the phytoncide was observed as determined by SDS-PAGE and immunoblot. Overall results suggest that the phytoncide is a strong antibacterial agent that has a bactericidal action against P. gingivalis. The phytoncide does not seem to affect much the profile of the major outer membrane proteins but interferes with antioxidant activity of the bacterium. Along with this, yet unknown mechanism may cause changes in cell morphology and eventually cell death.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.4
• /
• pp.95-113
• /
• 2009

Objectives : Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) is a hair care product which is composed of ten plant extracts used in oriental medicine. This study was carried out to investigate the effects of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) on hair regrowth and cytokine changes in a shaving model of C57BL/6 mice. Materials and Methods : Five-week-old mice were acclimated for 1 week at a temperature between $21-23^{\circ}C$, 40-60% relative humidity, and 12h of a light/dark cycle before beginning of the experiment. There were three experimental groups including 50% ethanol (EtOH, control), a positive control of 3% Minoxidil, and 30% Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) in 50% ethanol in 18 female mice. The test compounds were topically treated once a day over 12 days. The hair regrowth was photographically and histologically determined during the experimental period of 12 days. Revelation of EGF, $TGF-{\beta}1$ and IL-6 in hair follicle were also determined using immunohistochemistry. In addition to that, IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue were determined using enzyme-linked immunosorbent assay(ELISA). Results : Hair regrowth in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups was promoted earlier and faster than the control group. Concentrations of hairs and thick-hair ratio in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups were promoted than the control group. EGF was moderately positive in hair follicle of 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups, but negative in the control group. $TGF-{\beta}1$ was not significantly difference between the groups. IL-6 in hair follicle of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group was negative, but weakly positive in 3% Minoxidil and control group. IL-6 and $IL-1{\beta}$ in skin tissue were significantly decreased in Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group, but there was not significantly decreased in 3% Minoxidil and control group. $TNF-{\alpha}$ in skin tissue was significantly decreased in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups. Conclusions : These results suggest that Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) has hair growth promoting activity and it can be used for treatment of alopecia. And these effects relate to EGF revelation of hair follicle and a decrease IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.259-268
• /
• 1988

For the purpose of examining the effects of simulated acid rain on nutrient contents of plant tissues in Pintos densiflora seedlings and Forsythia koreana rooted cuttings, the experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agricultural Junior College. One-year-old Pinus densiflora seedlings and Forsythia koreana cuttings were planted in the pots filled the mixed soils(nursery soil : forest soil of siliceous sandy loam=1 : 1 v/v) in the early spring of 1986. The regime of artificial acid rain, in terms of spray frequency per month and spray amount at single treatment per plot, was simulated on the basis of climatological data averaged from 30 years records. Simulated acid rain(pH 2.0, pH 4.0, and pH 5.5 as control) containing sulfuric and nutric acid in the ratio of 3 : 2(chemical equivalant basis) diluted with ground water were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season(May 1 to August 31) in 1986. The results obtained in this study were as follow : (1) As for the nitrogen contents in plant tissues, P. densiflora increased significantly in one-year-old stembranch and root tissues, and F. koreana increased significantly in leaf and root tissues, as the pH levels of acid rain decreased. (2) The available phosphate contents in root tissues of P. densiflora, and in leaf and root tissues of F. koreana were significantly decreased, as the pH levels of acid rain decreased. (3) $K_2O$, CaO and MgO contents in plant tissues were significantly decreased in the both species as the pH levels decreased. And the effects of acid rain on F. koreana were higher than those of P. densiflora. (4) Sulfur contents of plant tissues in the both species were increased at pH 2.0 treatment. There were significant differences among three acid rain treatments in leaf and root tissues of P. densiflora, and in all parts of F. koreana. (5) In the effects of simulated acid rain on the both species and the tested soils, in general, F. koreana revealed higher sensitiveness than P. densiflora, and the lower pH levels of simulated acid rain were treated, the more sharp reaction was showed.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.571-576
• /
• 1998

Experiments were conducted to evaluate the efficacy of the application of low concentration insecticides by sprinkler system for control of the pine needle gall midge, Thecodiplasis japonensis, by killing the adults emerging and copulating near the ground. For ground spray, 2 insecticides of fenitrothion and deltamethrin, dilutions of $2,000{\times}$ and $3,000{\times}$ deltamethrin, and 3 spray intervals of 1-3 day were tested at the peak time of adult emergence during the day time. The results are as follows ; 1. Ground spray of fenitrothion 50% EC and deltamethrin 1% EC were found to be highly effective for control of the pine needle gall midge. Average gall formation by fenitrothion, deltamethrin and untreated ones were 3.40%, 5.23% and 45.69%, respectively ; control value of both insecticides exceeded 88%. 2. As a ground spray of deltamethrin 1% EC, dilution $2,000{\times}$ was significantly different from $3,000{\times}$ in gall formation rates. Average gall formation of $2,000{\times}$ plots and $3,000{\times}$ treated ones were 5.23% and 18.00% ; control values were 89.44% and 63.66%, respectively. 3. Diurnal treatment of ground spray was found to be highly effective for control of pine needle gall midge. 4. In particular, control by ground application of dilutions $2,000{\times}$ and $3,000{\times}$ of deltamethrin is suggested because it does not have an adverse effect on arthropods of the ground surface such as ants and spiders.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.549-556
• /
• 1998

To develop the effective methods of flowering stimulation, Hinoki cypress (Chamaecyparis obtusa Sieh. et Zuec.) grafts growing in a seed orchard and in a clone bank in Southern Breeding Station of Cheju were applied with gibberellin treatments, and predicted the seed production potential. In the seed orchard, $GA_{4/7}$ 1.5cc was injected into the stem of drafts and sprayed whale tree crown with $GA_3$ 300ppm and $GA_{4/7}$ 300ppm. Un the other hand, in the clonal archives, drafts were given intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark wind $GA_3$ 20mg and sprayed with $GA_3$ 300ppm. Additionally, grafts growing in the seed orchard were treated with gibberellins at 3 different periods of time and 3 different treatments during the growing season. The results obtained here are summarized as follows : 1. All of the applications of Gilbberellin promoted female flower formation. Among these, the treatment of intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark was racist effective, followed by the spraying of $GA_3$ 300ppm. Similarly, the applications of gibberellin promoted male flower formation. 2. Regarding the time of applications, treatment on August 15 was more effective than those of August 31 and September 11 in the stimulation of female flowers. On the contrary, there was no significant difference in the number of male flowers among 3 different time treatments. 3. It was supposed that the application of the intrusion of $GA_{4/7}$ 1.5cc into the excised and open inner part of bark on August 15 showing the best effect in female flower formation can produce 22.12kg seeds per ha. 4. Considerable significant difference existed among clones for both female and male flower formations. 5. Flower formation, especially female flower formation, seemed to be partially associated with the genetic potential of individual trees.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.73-85
• /
• 1999

This study was conducted to reveal the characteristics of the early growth by locality for Korean white pine planted in Gapyung and Kwangju, Kyunggi-Do and Youngdong, Choongchungbuk-Do. The effects of local climatic conditions as one of environmental factors on the growth were also analyzed. For this, several stand variables such as number of trees survived, mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, periodic annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique, for the estimation of local climatic conditions, which makes use of empirical relationships between the topography and the weather in study areas was applied to produce reasonable estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine over remote land area where routine observations are rare. From these monthly estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc. which affect the tree growth, were computed for each locality. The periodic annual increments were then correlated with and regressed on the weather variables to examine effects of local weather conditions on the growth. Gapyung area provided the best conditions for the growth of Korean white pine in the early stage and Kwangju area ranked second. On the other hand, the growth pattern in Youngdong ranked last overall as expected. It is also found that the local growth patterns of Korean white pine in juvenile stage were affected by typical weather conditions. The conditions such as low temperature, high relative humidity, and large amount of precipitation provide favorable environment for the growth of Korean white pine. Especially, the diameter growth, basal area growth, and volume growth are mainly influenced by the amount of precipitation. However, it is proved that the height growth is affected by both the precipitation and temperature.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.41-60
• /
• 2006

The system of teaching culinary practice needs drastic modification to catch up with dietary life and education curriculum changes. To reflect such changes, it is necessary to instill a strong will and interest as well as educational environment improvement in teachers. In this sense, this study researched the teachers' stages of concerns, levels of use, innovation configuration, and intervention demands, based on the CBAM(Concerns Based Adoption Method) developed by Hord et. al. For the survey, 500 questionnaires sent by mail and 187 were analyzed by SPSS/win 10.0 program. The results are summarized as follows. 1) The teachers stages of concerns on culinary practice is assessed to be in the lowest level of perceptual stage, which indicates a state of indifference. 2) In terms of the levels of use, routine use was the highest, followed by refinement use, integrated use, research use, and reinvent use in descending order. Mechanical use posted the lowest level. Even though the stages of concern showed the beginning stage, the Level of use was relatively high. 3) About the innovation configuration, approximately 30% of the teachers were not accomodate the culinary practice referred to the 7th National Education Curriculum. 4) According to the intervention demands on culinary practice education, it was found that teachers generally wanted more interventions in every component. Among the intervention components, the highest demand was on the support for facility. Demand on the financing is the second highest. Teachers in the level of routine use demanded more information and materials supply and individual encouragement, but teachers in the level of preparation needed study opportunity for training on operation skills more.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.239-240
• /
• 2008

As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.