• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.137-145
• /
• 1984

Tests for the physical and chemical properties on the dispersive soils from the 3 selected sites in the northeast region of Thailand were carried out in the field and laboratory. In oder to find out the relationship between c1ay contents and dispersivity of the soil, some specimens are artificially mixed with a certain amount of clay in the laboratory and tested by means of pinhole tests. The artificial soils are dispersed in pinhole tests regardless of their clay contents. Chemical properties on the soil saturation extract and reservoir water are also determined by means of sodium adsorption ratio (SA,R), exchangeable sodium percentage (ESP) and pH. The dispersive soils in the region have ranges of 1.8~6.7 SAR, 1.4~7.9 ESP and 5.4~9.0 pH value. Namely, the dispersive soils studied have somewhat higher SAR, ESP and pH value than those of ordinary soil.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.243-254
• /
• 1996

The main purpose of this study is to investigate the collection efficiency characteristics of a cylindrical ESP. To do that, it is necessary to analyze the electric field, gas flow field, and mechanism of particle movement by numerical simulation based on EHD model. For a gas flow field, Navier-Stokes equation involving the electric source term was solved by SIMPLE algorithm. In case of the electric field, the current continuity and electric field equations were solved by S.O.R. method. The analysis of particle movement was performed on the basis of PSI-CELL model from the Lagrangian viewpoint. The results showed that the influence on the gas flow field by the electric field is almost negligible in a cylindrical ESP. The particle drift velocity $V_P$ toward the collection surface is increased continuously by the electrostatic force due to the rise of particle charge as the particle is moving to the flow direction and the particle size becomes larger. The collection efficiency is to quitely higher with the increase of applied voltage for the same particle size, while becomes smaller as the inlet velocity is increased.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.1-6
• /
• 2022

In this paper, we will present the realization of a facial recognition system using the ESP32-CAM board controlled by an Arduino board. The goal is to monitor a remote location in real time via a camera that is integrated into the ESP32 IOT board. The acquired images will be recorded on a memory card and at the same time transmitted to a pc (a web server). The development of this remote monitoring system is to create an alternative between security, reception, and transmission of information to act accordingly. The simulation results of our proposed application of the facial recognition domain are very efficient and satisfying in real time.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.400-405
• /
• 2003

A gene (hpkA), encoding a histidine protein kinase homolog, has been identified in the upstream region of the espAB operon in Myxococcus xanthus. It encodes a 333 amino acid (35,952 Da) protein with a histidine protein kinase domain in the region from amino acid 90 to 317. Null mutations in the hpkA gene caused formation of loose irregular fruiting bodies, while wild-type strains developed tight hemispherical fruiting bodies under developmental conditions. Sporulation of the hpkA mutant was delayed by at least 12 h compared to that of the wild-type. It appeared that the hpkA mutation increased the expression of the espAB operon by more than 2-fold compared with the wild-type under developmental conditions. Expression of the hpkA gene was low under vegetative conditions, but was highly induced under developmental conditions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.641-649
• /
• 2011

The aim of this study is to understand the characteristics of exhausting particulate matters (PM) and to control emitted PM from meat cooking restaurants. We found that $PM_{2.5}$, $PM_{5.0}$ occupy 69.2% and 98.6% of total PM from pork cooking, respectively. Therefore, we can see that it is not easy to remove PM generated from a pork cooking process. The collection efficiencies of various control devices, which are a condensing scrubber, a cyclone, an impactor, an oil filter and an electrostatic precipitator (ESP), were measured and compared. ESP had the highest collection efficiency (88.6%) and condensing scrubber had the lowest one (68.0%). However, the system recovering property should be considered to choose a control device because PM from meat cooking process are extremely stickiness. Therefore, we can recommend that ESP following an impactor or a cyclone is the best combination to remove PM generated from meat cooking restaurants.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.3-8
• /
• 2009

Since 2001, the Building Energy Efficiency Rating and Certification System have been implemented in Korea. For rating the energy efficiency performance, the evaluation tool for Building Energy Efficiency Rating System has been used. In this study, the evaluation tool was compared with detailed analysis programs(Trnsys 16, ESP-r) through simulations of heating energy needs for apartment, and we checked the character of the evaluation tool.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.201-208
• /
• 2006

This paper describes the control philosophy of ESP(Electronic Stability Program) which consists of the stability control the fault diagnosis and the fault tolerant control. Besides the functional performance of the stability control, robustness of control and fault diagnosis is focused to avoid the unnecessary activation of the controller. The look-up tables are mentioned to have the accurate target yaw rate of the vehicle and obtained from vehicle tests for the whole operation range of the steering wheel angle and the vehicle speed. The wheel slip control with a design goal of wheel slip invariance is implemented for the yaw compensation and the target wheel slip is determined by difference between the target yaw rate and actual yaw rate. Since the ESP has a high severity level and the robust control is required, the robustness margin for the stability control is determined according to several uncertainties and the robust fault diagnosis is performed. Both computer simulation and test results are shown in this paper.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.92-99
• /
• 2000

To compare the effect of food waste compost(FWC) application on the sodicity of paddy and upland soil, laboratory experiment was conducted. Six kinds of FWC made of various mixing ratio of food waste and pig slurry as raw material were applied to paddy soil under submerged condition and to upland soil in field water capacity, and were kept at $25^{\circ}C$ under laboratory incubation. The higher the mixing ratio of food waste on making FWC, the higher the FWC showed Na content and EC. Mineralized ratio of cations in FWC during incubation showed no difference between paddy and upland soil. It was high in the order of Na>K>Mg>Ca as 99, 94, 71, and 71%, respectively. NaCl contents of FWC applied to soils against SAR and ESP were fitted well to first linear regression with extremely high significance($R^2=0.99$). Increasing rate of SAR and ESP was higher in upland soil than paddy soil by 2.3 times. The difference was considered to be caused by dilution effect which was exerted by the application of more soil to water ratio to paddy soil than to upland soil on SAR analysis in consideration of cultivating condition. The calculated values of $([Ca^{2+}+Mg^{2+}]/2)^{1/2}$ used as a denominator on SAR calculation showed a little difference among FWC treatments by 2.1~2.4, while [$Na^+$] used as a numerator showed much variance by 3.1~9.5. Therefore, as a parameter for the assessment of FWC quality affecting soil sodicity, the use of only Na content in FWC was proposed without regarding Ca and Mg contents. Soil Ex. Na contents showed extremely high correlation($R^2=0.99$) with ESP. Moreover, because the former can be more easily determined than the latter, soil Ex. Na content was proposed as a new sodicity index.

• Journal of the Korean Geographical Society
• /
• v.40 no.6 s.111
• /
• pp.671-693
• /
• 2005

This paper is to explore critically environmentalism, especially in terms of environmental justice, suggested or implied in theory of liberalism which has been the ideological foundation of contemporary society. It begins with a brief look at liberal perspective in a broad sense, then interprets in-depth the classical liberalism of J. Locke, libertarianism (esp. R. Nozick) and utilitarianism (including cost-benefit analysis) from the environmental point of view. And finally it considers liberal pluralism and other alternative theories of pluralism, especially communitarianism (esp M. Walzer), postmodern pluralism (esp. I. Young), and cultural pluralism (esp. C. Taylor) in order to overcome limitations of liberal environmentalism and to find out some clues for theory of environmental justice. In conclusion, this paper argues that we need to transfer from liberalism (including liberal pluralism) to critical pluralism in oder to develop a proper understanding of environmental problems and to conceptualize a desirable theory of environmental justice.

• Particle and aerosol research
• /
• v.9 no.2
• /
• pp.103-110
• /
• 2013

The electrostatic precipitator (ESP) has been used for degrading atmospheric pollutants. These devices induce the electrical forces to facilitate the removal of particulate pollutants. The ions travel from the high voltage electrode to the grounded electrode by Coulomb force induced by the electric field when a high voltage is applied between two electrodes. The ions collide with gas molecules and exchange momentum with each other thus inducing fluid motion, electrohydrodynamic (EHD) flow. In this study, for the simulation of electric field and EHD flow in ESPs, an open source EHD solver, "espFoam", has been developed using open source CFD toolbox, OpenFOAM(R) (Open Field Operation and Manipulation). The electric potential distribution and ionic space charge density distribution were obtained with the developed solver, and validated with experimental results in the literature. The comparison results showed good agreement. Turbulence model is also incorporated to simulate turbulent flow; hence the developed solver can analyze laminar and turbulent flow. In distributions of electric potential and space charge, the distributions become distorted and asymmetric as the flow velocity increases. The effect of electrical drift flow was investigated for different flow velocities and the secondary flow in a flow of low velocity is successfully predicted.