• 대한인간공학회지
• /
• 제31권6호
• /
• pp.785-791
• /
• 2012

Objective: The aim of this study was to investigate the correlation between 3D visual fatigue and physiological measures by canonical correlation analysis enabling to categorical correlation. Background: Few studies have been conducted to investigate the physiological mechanism underlying the visual fatigue caused by processing 3D information which may make the cognitive mechanism overloaded. However, even the previous studies lack validation in terms of the correlation between physiological variables and the visual fatigue. Method: 9 Female and 6 male subjects with a mean age of $22.53{\pm}2.55$ voluntarily participated in this experiment. All participants were asked to report how they felt about their health sate at after viewing 3D. In addition, Low & Hybrid measurement test(Event Related Potential, Steady-state Visual Evoked Potential) and for evaluating cognitive fatigue before and after viewing 3D were performed. The physiological signal were measured with subjective fatigue evaluation before and after in watching the 3D content. For this study suggesting categorical correlation, all measures were categorized into three sets such as included Visual Fatigue set(response time, subjective evaluation), Autonomic Nervous System set(PPG frequency, PPG amplitude, HF/LF ratio), Central Nervous System set(ERP amplitude P4, O1, O2, ERP latency P4, O1, O2, SSVEP S/N ratio P4, O1, O2). Then the correlation of three variables sets, canonical correlation analysis was conducted. Results: The results showed a significant correlation between visual fatigue and physiological measures. However, different variables of visual fatigue were highly correlated to respective HF/LF ratio and to ERP latency(O2). Conclusion: Response time was highly correlated to ERP latency(O2) while the subjective evaluation was to HF/LF ratio. Application: This study may provide the most significant variables for the quantitative evaluation of visual fatigue using HF/LF ratio and ERP latency based human performance and subjective fatigue.

• 인지과학
• /
• 제27권3호
• /
• pp.421-439
• /
• 2016

새로운 한자합성어의 학습에서 의미 투명성의 효과를 행동 실험과 ERP 실험을 통해 조사하였다. 참가자들은 구성형태소와 단어 의미의 관계가 투명한 조건(=투명 신단어)과 불투명한 조건(=불투명 신단어)에서 3회기에 걸쳐 새로운 단어-의미쌍을 학습하였다. 학습 단계에서는 자기 조절 의미 학습 시간과 ERP를 측정하고, 검사 단계에서는 학습한 단어에 대한 어휘판단시간과 의미 회상 점수를 측정하였다. 의미 학습 시간, 어휘판단, 의미 회상 검사 모두에서 의미 투명성의 효과가 유의하게 나타났다. 투명 신단어의 경우, 불투명 신단어에 비해 의미 학습 시간이 더 짧았음에도 불구하고, 어휘판단이 더 정확하고 빨랐으며, 의미 회상 검사 수행이 더 좋았다. 의미 투명성 효과는 ERP의 N400 성분의 진폭에서도 나타났다. 단어 의미가 투명한 조건에 비해 불투명한 조건에서의 N400 진폭이 더 컸다. 본 연구의 결과는 단어 재인 연구에서 발견된 의미 투명성 효과가 단어 학습에서도 나타남을 보여주며, 이는 단어 학습에서 형태소 정보가 중요한 역할을 한다는 것을 시사한다.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.43-57
• /
• 2021

Smart factories can be defined as intelligent factories that produce products through IoT-based data. In order to build and operate a smart factory, various new technologies such as CPS, IoT, Big Data, and AI are to be introduced and utilized, while the implementation of a MES system that accurately and quickly collects equipment data and production performance is as important as those new technologies. First of all, it is very essential to build a smart factory appropriate to the current status of the company. In this study, what are the essential prerequisite factors for successfully implementing a smart factory was investigated. A case study has been carried out to illustrate the effect of implementing ERP and MES, and to examine the extensibilities into a smart factory. ERP and MES as an integrated manufacturing information system do not imply a smart factory, however, it has been confirmed that ERP and MES are necessary conditions among many factors for developing into a smart factory. Therefore, the stepwise implementation of intelligent MES through the expansion of MES function was suggested. An intelligent MES that is capable of making various decisions has been investigated as a prototyping system by applying data mining techniques and big data analysis. In the end, in order for small and medium enterprises to implement a low-cost, high-efficiency smart factory, the level and goal of the smart factory must be clearly defined, and the transition to ERP and MES-based intelligent factories could be a potential alternative.

• 디지털콘텐츠학회 논문지
• /
• 제13권2호
• /
• pp.205-211
• /
• 2012

본 논문은 기업의 마케팅 캠페인 실행 성과를 향상시키기 위한 디지털 마케팅 모델에 대한 연구 결과를 제시하고 있다. 최근 ERP, CRM, SCM 등 비즈니스 가치 사슬 프로세스를 개선하기 위한 프로젝트를 마친 기업들은 마케팅 프로세스를 전사적으로 개선하기 위한 작업을 진행하고 있다. 기존 마케팅 기법의 한계를 극복하기 위해서 디지털 마케팅 기법을 활용하기 위한 시도가 많다. 특히 마케팅 프로세스의 실행 단계인 캠페인 수행성과를 향상시키기 위해 디지털 마케팅 기법들을 적용하고 있다. 이에 본 논문에서는 디지털 마케팅 연구 모델과 연구 가설을 수립하고, 마케팅 전문가 설문 조사를 통한 통계적 분석 방법을 통해 검증하고자 하였다. 연구를 통해서 디지털 마케팅 모델 중에서 웹 분석, 소셜 분석, 개인 맞춤형 고객 관계 분석, 캠페인 실행 자동화, 실시간 캠페인 관리 등의 기법이 기업의 마케팅 캠페인 실행 성과에 영향을 미치는 것을 실증적으로 검증하였다.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.639-648
• /
• 2016

Purpose: Existing precedent studies include success factors of individual management innovation activities constantly. However, those studies have limitations about the common key success factors of individual management innovation activities. Methods: For this study, we investigate the key success factors using literature research of the most typical management innovation activities adopted and implemented by many companies in Korea, such as 6sigma, TQM, Lean 6sigma, ERP, TPM, BPR, Project Management, System Engineering. Factors emerging repeatedly was combined into common factors and inherent factors that are necessary for the success of individual management innovation activities are designated to essential factors. Results: 'Essential factors for Six Sigma' consist of 5 items. Black belt operating system, personnel management system linkage, the correct management of the data, perform improvement projects associated with financial performance financial result, linked to financial performance improvement project, project progress management. 'Essential factors of TQM' are arranged 4 items. Quality team's independence and role, goal-setting, Quality Information System, corporate's philosophy of quality first. 'Essential factors of Lean Six Sigma' are the selection of value stream which is based on the customer needs and the value creation and identify the project based on the selected value in the company. 'Essential factors of ERP' are investigated 6 items. Ongoing system maintenance and upgrades, the measurement and support of user satisfaction, the operating systems and the policies for the maintenance, IT infrastructure, change adaption condition monitoring, focusing on improving business performance. 'Essential factors for TPM' are arranged 4 items. Motivated and energetic Bottom-Up, CEO's recognition of the importance facility management, long-term perspective of necessity and ongoing patience. 'Essential factors for BPR' are the pursuit of change process and the staff's sense of crisis management. 'Essential factors for Project Management' are the strategy that reduce the risk management skills through risk management and the understanding and organized management for the project participant's needs. 'Essential factors for System Engineering' consist of 2 items. The first is the design for the best balanced system with pre-analysis about the compromise the cost, schedule and the performance. The second is the analysis of large problem into small problems which can solved. We have found the solution considering components of the interface through the systematic perspective. Conclusion: Common factors and essential factors presented in this study will properly help to introduce the individual management innovation activities for the each business sector and implement management innovation. After this study, new literature research that reflect new studies should accomplish steadily.

• 한국정보시스템학회지:정보시스템연구
• /
• 제30권1호
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.3-10
• /
• 2010

The present study aims to investigate neural activations according to the level of code switching in English proficient bilinguals and to find the relationship between the performance of language switching and proficiency level using ERPs (event-related potentials). First, when comparing high-proficient (HP) with low-proficient (LP) bilingual performance in a native language environment, the activation level of N2 was observed to be higher in the HP group than in the LP group, but only under two conditions: 1) the language switching (between-language) condition known as indexing attention of code switching and 2) the inhibition of current language for L1. Another effect of N400 can be shown in both groups only in the language non-switching (within-language) condition. This effect suggests that both groups completed the semantic acceptability task well in their native language environment without the burden of language switching, irrespective of high or low performance. The latencies of N400 are only about 100ms earlier in the HP group than in the LP group. This difference can be interpreted as facilitation of the given task. These results suggest that HP showed the differential activation in inhibitory system for L1 in switching condition of L1-to-L2 to be contrary to inactivation of inhibitory system for the LP group. Despite the absence of an N400 effect at the given task in both groups, differential latencies between the peaks were attributed to the differences of efficiency in semantic processing.

• 대한불안의학회지
• /
• 제16권1호
• /
• pp.41-48
• /
• 2020

Objective : There have been limited scientific studies differentiating those who attempt suicide from those who think about suicide but do not attempt suicide. Altered event-related potential (ERP) performance, such as GoNogo ERP has been regarded as the neurocognitive processes associated with behavioral inhibition and poor impulse control. The purpose of this study was to investigate the association between Nogo ERP and suicide attempt. Methods : A total of 63 participants (33 participants with suicide ideation and 30 with suicide attempt) were recruited, and performed GoNogo tasks during the electroencephalogram measurement. Depression, anxiety, emotional regulation and impulsivity were evaluated by self-rating scales. The clinical measures and Nogo P3 component were compared between the groups. The correlational analyse was conducted to evaluate the relationship between the clinical characteristics and the Nogo P3 component. Results : Participants with suicide attempt significantly decreased the Nogo P3 amplitudes at the frontal-central electrode than participants with suicide ideation (p=0.004, FDR adjusted p=0.032). In the correlation analysis, the Nogo P3 amplitude at frontal-central electrode was correlated with the total score of the Barrett impulsivity scale (r=-0.383, p=0.002), attentional impulsivity (r=-0.365, p=0.003) and motor impulsivity (r=-0.389, p=0.002) subscales of the Barrett impulsivity scale. Conclusion : These findings suggest that the decreased Nogo P3 amplitude may be one of the candidates of biological marker for poor impulse control in those who attempt suicide.

• 유통과학연구
• /
• 제15권1호
• /
• pp.123-130
• /
• 2017

Purpose - This research aims to examine the effect of e-business adoption on firm's growth and profitability in the distribution industry. The value added from the distribution industry acts as the cost of other industries. As the distribution industry develops, its stage becomes shorter and the distribution margin becomes smaller. Therefore, e-business is expected to have a different effect on the distribution industry than other industries. Research design, data and methodology - The previous research generally used e-business adoption as an independent variable and firm's performance as a dependent variable. This study elaborated the model using a dynamic panel model that includes the performance variable of the previous year as an independent variable. By employing system GMM (Generalized Method of Moments), the endogeneity problem in the dynamic panel model can be solved. For the analysis, I extracted the distribution companies as the raw data in the National Statistical Office's Business Activity Survey over the period 2006 to 2012. Results - The growth rate of firms adopting e-business was 0.299%p higher than that of the non-adopter. However, only ERP (Enterprise Resource Planning), KMS (Knowledge Management System) and SCM (Supply Chain Management) contributed positively to the growth rate. In the case of profitability, it was 0.04%p higher than the distribution companies that did not adopt e-business. ERP and LMS (Learning Management System) improve profitability, while SCM reduces profitability. Consequently, while ERP improves both growth and profitability, SCM improves growth but reduces profitability. In addition, KMS improves firm's growth only, and LMS does only profitability, showing that each e-business has a differentiated effect. Conclusions - Since the distribution industry has different characteristics from manufacturing and other service industries, the introduction of e-business may not guarantee the growth and profitability of distribution companies. Careful introduction considering the characteristics of the distribution industry is required. In particular, it is necessary to select an e-business meeting the characteristics and needs of a distribution company, and thereafter, it is required for the company's own efforts to internalize it within the system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.143-150
• /
• 2000

A field test performance of FRP-Grouting method at a collapsed slope were carried out to verify the improving effect. The results are summerized in this paper.