• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.68-71
• /
• 2011

Purpose: To analyze relation between age or parameters measured before operation and cartilage erosion of the first metatarsal head measured during operation. Materials and Methods: The study was targeted at 56 patients and 79 feet, who underwent Scarf osteotomy or Scarf and Akin osteotomy from November 2009 through November 2010, and whose cartilage lesion of the first metatarsal head referred to the cartilage grade III or IV of the International Cartilage Repair Society. The measurement parameters were age, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle. The cartilage erosion of the first metatarsal head was measured by one surgeon using cellophane. Occupancy rate and frequent involved sites of the cartilage erosion were recorded using Auto$CAD^{(R)}$ and adobe Illustrator CS4 program. SPSS correlation test and T-test were used for statistical analysis of the parameters and the cartilage erosion. Results: The cartilage erosion was incurred frequently in the sagittal groove and the site where subluxation or dislocation of the tibial sesamoild bone occurred but frequent involved sites had no statistical significance with cartilage erosion. The age showed a statistical significance with the cartilage erosion in the correlation test (p=0.003). Especially, the group of over 51 year old patients was turned out to have association with the cartilage erosion, compared to the group of below 51 (p=0.007). But, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle were no statistical significance with the cartilage erosion. Conclusion: We found the more the age of patients increased (especially above 51), the more cartilage erosion increased. And it is thought that we pay attention to reduce tibial sesamoid bone.

• 농업생명과학연구
• /
• 제50권5호
• /
• pp.111-120
• /
• 2016

본 연구는 경남지역 야계사방사업지의 적지적소를 판정하기 위해 사방댐 총 526개소와 계류보전시설 총 230개소의 기시공지 및 시공예정지를 대상으로 입지 및 임상, 수문조건을 분석하였다. 사방댐 시공지과 계류보전시설은 입지환경인자 중 퇴적암, 표고 201~400m, 경사 21~30°, 산사태위험등급 2등급인 곳에 가장 많이 시공되었고, 임상환경인자인 임상, 경급, 영급, 밀도 중 소경급, III영급 임분에서만 시공빈도가 유사하였다. 또한 사방댐의 크기 및 개소수를 결정하는 수문환경인자 중 유역면적의 경우 50ha 이하, 수계밀도 2.1~4.0km/㎢, 종장형 수계, 1시간당 최대강수량 61~90mm, 1일 최대강수량 201~300mm인 곳에서 가장 많이 시공되었다. 따라서 사방댐 시공지와 계류보전시설지 간의 입지 및 수문조건이 다소 유사한 것으로 추후 야계사방사업을 실시할 경우 산각붕괴 및 침식 발생위험이 높은 지역에 한해서는 사방댐과 계류보전시설의 병행이 가능한 것으로 판단된다.

• 수산해양기술연구
• /
• 제36권2호
• /
• pp.132-138
• /
• 2000

The effect of fluid flow on corrosion and erosion-corrosion of metal is a well-recognized phenomenon in pipelines and machinery equipment, and so on. Not only are fluid hydrodynamics important, but also the corrosiveness of the process or production stream affects the corrosion system. Recent research demonstrates that it is possible to erosion-corrosion(E/C) phenomena in terms of hydrodynamics, electrochemical corrosion kinetics and film growth/removal phenomena. Stress corrosion cracking behavior under cavitation erosion-corrosion of mild steel(SS41) was investigated of base metal and weldment under loaded stress. Main result obtained are as follows : 1) The cavitation erosion sensitivity of base metal affected weight loss is more susceptive than heat affected zone, 2) The corrosion sensitivity affected weight loss of welding heat cycle is less susceptive on stress corrosion under cavitation erosion-corrosion than stress corrosion.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.200-208
• /
• 2012

Surge overflow may cause damage on earthen levees. Levee strengthened on the levee crest and landward-side slope can provide protection against the erosion damage induced by surge overflow. In this paper, surge overflow of a roller compacted concrete RCC strengthened levee was studied in a purely Lagrangian and meshless approach, the smoothed particle hydrodynamics (SPH) method. After verifying the developed model with analytical solution and comparing the results with full-scale experimental data, the roughness and erosion parameters were calibrated. The water thickness, flow velocity, and erosion depth at crest, landward-side slope and toe were calculated. The characteristics of flow hydraulics and erosion on the RCC strengthened levee are given. The results indicate that the RCC strengthened levee can resist erosion damage for a long period.

• International Journal of Fluid Machinery and Systems
• /
• 제8권3호
• /
• pp.183-192
• /
• 2015

The aim of this study was comparative analysis of sediment-induced erosion on optimized design and traditional design of Francis runner blade. The analysis was conducted through laboratory experiments in a test rig called Rotating Disc Apparatus. The results showed that the extent of erosion was significantly less in the optimized design when compared based on the material loss. It was observed that the optimized design could reduce sediment erosion by about 14.4% if it was used in place of the reference design for entire duration of the experiment. Based on the observations and results obtained, it has been concluded that the optimization of hydraulic design of blade profile of Francis runner can significantly reduce the effect of sediment-induced erosion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.328-336
• /
• 2002

decrease in efficiency due to cavity fluid fluctuation. The purpose of this study is to examine erosion aspect on the SS400 specimen by cavitation and the effect of impact pressure generated from the demolition of the cavity of ultrasonic vibrator horn in the marine sludge oil environment. The erosion damage of specimen was investigated mainly on weight loss, weight loss rate and maximum erosion rate with variation of the vibration amplitude of $50{\mu}m, 24{\mu}m$ as well as the change of space between transducer horn and specimen. The experimental results showed that as the space between ultrasonic vibrator horn and specimen disk increased, the weight loss and weight loss rate decreased and the values were larger in SFO than in SLO. These findings would help interpret the aspect of cavitation erosion damage in metallic materials of different operating environment and material characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.376-378
• /
• 1988

W/CE system contacts were manufactured f a press sinter-infiltrate process to compare with their arc erosion mechanism. The results of arc switching test show that erosion rate of contacts is dependence of test current and there is difference in the erosion rates between W contacts and WC contacts. At high current of 1000A erosion rate of W contacts is critically increased by formation of surface cracks. In especial arc anti-erosion is improved by Hi additive.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.911-920
• /
• 2010

A closed-type erosion control dam were suggested as an effective method to protect from debris flow damages caused by seasonal rainstorm, typhoon, and local heavy rain. However, design method on a closed-type erosion control dam currently practiced in the engineering is not well established with respect to type of the dam, design parameters, maintenance and so forth. In this study, design parameters for closed-type erosion control dam were evaluated and the comparison of design parameters used in Korea and Japan was performed. Based on the results of this study, modification of design method for closed-type erosion control dam are recommended.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.98-104
• /
• 2001

Recently, the researches on the prevention of marine oil pollution being strengthened. Sludge oils were unavoidably produced in ship's operations, therefore it is necessary to manage the sludge oils inside the ship itself with the view to prevent marine oil pollution from ship. The present study deals with the ultrasonic breaking systems that recycle the sludge oil from ships into usable oil to be burnt. At the first instanceexperimental studies were carried out to investigate the homogenizing effect of the marine oils and the erosion aspect of horn disc by repeated vibration of ultrasonic transducer. The erosion damages for horn disc SS41 steel with weight loss rate and the irradiation time to max. erosion rate were examined according to the variation of the transducer amplitude, the oil temperature and the immersing depth of horn disc. As the result of it, the erosion aspects of horn disk were varied with oil environments and testing time.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.95-103
• /
• 2001

The properties of the detonation sprayed cermet coating are investigated through the mechanical, corrosion and erosion test. The test results are also compared with the properties of the substrate materials, STS 329J1, dual phase stainless steel and the plasma sprayed cermet coatings. The two kinds of carbide cermet power, WC+NiCr, Cr$_3$C$_2$+NiCr were used in this experiment. The experimental results showed that the anti-corrosive and anti-erosive properties of the detonation sprayed cermet coatings are superior to the plasma sprayed cermet coatings. The WC+NiCr cermet coating appears to be more effective than Cr$_3$C$_2$+NiCr cermet coating in abrasive erosion environment, whereas the Cr$_3$C$_2$+NiCr cermet coatings are more effective in cavitation erosion environment.