• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1673-1675
• /
• 2000

The nonlinearity and degradation characteristics of $Pr_{6}O_{11}$-based ZnO varistors doped with, $Er_{2}O_3$ were investigated. The varistors were sintered at 1335$^{\circ}C$ in the addition range of 0.0 to 2.0 mol% $Er_{2}O_3$, respectively The varistor doped with $Er_{2}O_3$ exhibited more higher nonlinearity than that without $Er_{2}O_3$. Most of the varistors containing 0.5 mol% $Er_{2}O_3$ showed nonlinear exponent more than 70 and a excellent stability, which the variation rate of the varistor voltage and the nonlinear exponent is -0.85% and -1.43%. respectively, even under 3rd d.c stress, such as (0.80 $V_{1mA}/90^{\circ}C$/12h)+(0.85$V_{1mA}/115^{\circ}C$/12h)+(0.90$V_{1mA}/120^{\circ}C$/12h). Consequently, since $Pr_{6}O_{11}$-based 2nO varistors doped with 0.5 mol% $Er_{2}O_3$ have an excellent stability as well as good nonlinearity, it is expected to be usefully used to develop the advanced varistors in future.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.605-611
• /
• 2014

$SrGd_{2-x}(MoO_4)_4:Er^{3+}/Yb^3$ phosphors with doping concentrations of $Er^{3+}$+ and $Yb^{3+}$ ($x=Er^{3+}+Yb^{3+}$, $Er^{3+}=0.05$, 0.1, 0.2, and $Yb^{3+}=0.2$, 0.45) were successfully synthesized by the cyclic microwave-modified sol-gel method, and their upconversion mechanism and spectroscopic properties have been investigated in detail. Well-crystallized particles showed a fine and homogeneous morphology with grain sizes of $2-5{\mu}m$. Under excitation at 980 nm, $SrGd_{1.7}(MoO_4)_4:Er_{0.1}Yb_{0.2}$ and $SrGd_{1.5}(MoO_4)_4:Er_{0.05}Yb_{0.45}$ particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, and a very weak 655-nm emission band in the red region. The Raman spectra of the doped particles indicated the domination of strong peaks at higher frequencies of 1023, 1092, and $1325cm^{-1}$ and at lower frequencies of 223, 2932, 365, 428, 538, and $594cm^{-1}$ induced by the incorporation of the $Er^{3+}$+ and $Yb^{3+}$+ elements into the $Gd^{3+}$ site in the crystal lattice, which resulted in the unit cell shrinkage accompanying a new phase formation of the $[MoO_4]^{2-}$ groups.

• International Journal of Oral Biology
• /
• v.45 no.4
• /
• pp.190-196
• /
• 2020

Several factors, including genetic and environmental insults, impede protein folding and secretion in the endoplasmic reticulum (ER). Accumulation of unfolded or mis-folded protein in the ER manifests as ER stress. To cope with this morbid condition of the ER, recent data has suggested that the intracellular event of an unfolded protein response plays a critical role in managing the secretory load and maintaining proteostasis in the ER. Tauroursodeoxycholic acid (TUDCA) is a chemical chaperone and hydrophilic bile acid that is known to inhibit apoptosis by attenuating ER stress. Numerous studies have revealed that TUDCA affects hepatic diseases, obesity, and inflammatory illnesses. Recently, molecular regulation of ER stress in tooth development, especially during the secretory stage, has been studied. Therefore, in this study, we examined the developmental role of ER stress regulation in tooth morphogenesis using in vitro organ cultivation methods with a chemical chaperone treatment, TUDCA. Altered cellular events including proliferation, apoptosis, and dentinogenesis were examined using immunostaining and terminal deoxynucleotidyl transferase dUTP nick end labeling assay. In addition, altered localization patterns of the formation of hard tissue matrices related to molecules, including amelogenin and nestin, were examined to assess their morphological changes. Based on our findings, modulating the role of the chemical chaperone TUDCA in tooth morphogenesis, especially through the modulation of cellular proliferation and apoptosis, could be applied as a supporting data for tooth regeneration for future studies.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.53-53
• /
• 2004

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.118-128
• /
• 1996

The lattice parameters of stoichiometric $UO_2$ and $U_{1-y}Er_{y}O_2$ in the range of y=0.01 to y =0.33 were determined with use of X-ray diffraction data. Oxygen potentials have been measured by means of a thermogravimetric method in the range of 1200~$1500^{\circ}C$ and $10^{-14}$ $\leq$ $Po_2$ $\leq$ $10^{-3}$ for pure $UO_2$ and $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions with y=0.02, y=0.06 and y=0.20, respectively. Their oxygen partial pressures were maintained by controlling $CO_2$/CO mixture atmosphere, and the $Po_2$ values corresponding to x of $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions were measured with an electrolyte oxygen sensor. The lattice parameter decreases linearly with an increase in the erbium content. The change of the lattice parameter can be expressed in a linear equation of y as a($\AA$) =5.4695-0.220y for 0 $\leq$y$\leq$0.33. The experimental coefficient of y -0.220 in $U_{1-y}Er_{y}O_2$ was an intermediate value between the calculated values -0.273 and -0.156 in the case of $U^{5+}$ and $U^{6+}$, respectively. The (equation omitted) has been found to undergo abrupt increase in the range of -360 to -270 kJ/mole for y=0.06 and -320 to -220 H/mole for y=0.20, respectively, in the temperature range of 1200-$1500^{\circ}C$. (equation omitted) increases with erbium content, but the effect of the dopant for x =0.01 is less significant than that for stoichiometry. The oxygen potentials for $UO_2$ and $U_{0.98}Er_{0.02}O_{2+x}$ can be approximately represented by the $U^{5+}$/$U^{4+}$ model but those for y$\geq$ 0.06 in $U_{1-y}Er_{y}O_{2{\pm}x}$ solid solutions cannot be interpreted by the mean uranium valence model.

• ETRI Journal
• /
• v.27 no.1
• /
• pp.95-101
• /
• 2005

Waveguide structures of the stand-alone electroabsorption (EA) modulator and the electroabsorption modulated laser (EML) are investigated using the 3D beam propagation method. The EA waveguide structures with InP-based passivation layers show saturation in the extinction ratio (ER) due to the stray light traveling through the passivation layers. This paper demonstrates that narrower passivation layers suppress stray-light excitation in the EA waveguide, increasing the ER. A taper structure in the isolation section of the EML waveguide can reduce the mode mismatch and suppress the excitation of the stray light, increasing the ER further. Low-index-polymer passivation layers can confine the mode more tightly in the active waveguide, yielding an even higher ER.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1800-1803
• /
• 1997

This paper presents new feedback actuators to achieve an accurate position control of a flexible gnatry robot arm. the translational motion in the plane is generated by two d.c.motors and controlled by emplying elecor-rheological(ER) clutch acutators. The generated motion can be continuously controlled by controlling the intensity of lectric field imposed to the ER fluid domain which tunes the transmitted torque of the ER clutch. n the other hand, during control action of the translational motion a flexible arm attached to the moving mass produces undesirable oscillatins due to its inherent flexibility. The oscillations are actively suppressed by applying feedback voltages to piezoceramic acutators bonded on the surface of the flexible arm. The control electric fields to be applied to the ER clutch and the control voltage for the piezoceramic actuator are determined via the loop shaping esign procedures(LSDP) in the H.inf. control technique. Comsequently, an accuate positiion control at the end-point of the flexible am is achieved during planar motion.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.245-252
• /
• 2013

In this study, mechanical and electrochemical characteristics with welding material in MIG welded with ROBOT for dissimilar Al alloys were investigated using various experiment methods. The MIG welding by ROBOT with ER5183 and ER5556 for the 5456-H116 and 6061-T6 Al alloy were carried out. The hardness of welding zone was lower than that of base metal. In electrochemical experiment, ER5183 welding material presented excellent characteristics. The yield strength and maximum tensile strength in welding with welding material of ER5183 presented lower value than those of ER5556. The elongation and time-to-fracture showed the opposite results.

• Biomedical Science Letters
• /
• v.13 no.2
• /
• pp.157-160
• /
• 2007

Endoplasmic reticulum (ER) plays formation of disulfide bonds and proper folding of secretory proteins. Cellular responses to ER stress enhances the stress-activated kinase pathway and the induces a lot of immediate-early genes. Among of them, the early growth response-1 (Egr-1), a transcription factor, which plays an important role in cell growth, development, differentiation, apoptosis and various types of injury. For that reason, we have tested the expression of Egr-1 against ER stress inducible drugs (tunicamycin, DTT, A23187 and BFA) to understand what kind of aspect occurred by ER stresses.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.299-303
• /
• 1993

Erbium metal을 불순물로서 2mol% 첨가한 TlGaS2:Er3+ 단결정을 수평전기로에서 합성한 ingot를 사용하여 수직 Bridgman 방법으로 성장시켰다. 성장된 결정은 층상으로 이루어진 monoclinic 구조였으며, 10K에서 간접전이형 및 직접전이형 energy band gap은 각각 2.55eV, 2.57eV이었고, Er3+ 이온에 의한 두 개의 불순물 광흡수 peak가 524.9nm와 656.4nm에서 관측되었다. Themally stimulated current(TSC)를 측정하여 0.21eV와 0.38eV의 donor 준위와 0.71eV의 accptor 준위를 구하였다. 10K에서 측정된 photoluminescence(PL) spectrum에서는 632nm와 759nm에서 D-A pair에 의한 broad한 peak와 552, 559, 666, 813, 816, 827nm에서 Er3+ 이온에 의한 sharp한 peak들이 나타났다.