• 환경생물
• /
• 제38권4호
• /
• pp.714-723
• /
• 2020

본 연구는 길안천의 저서성대형무척추동물 군집구조를 과거와 비교하여 분석하고자, 2018년 총 2회 조사를 실시하여 Lee (2004)의 결과와 비교하였다. 2018년 출현종수는 2003년과 비교하여 총 45종이 증가하였으며, 그중 EPT 분류군이 24종, OCH 분류군이 18종이 추가로 조사되었다. 군집분석 결과, 다양도지수(H')와, 풍부도지수(R')는 증가하였고, 우점도지수(DI)는 감소하는 경향을 보였다. 섭식기능군은 주워먹는무리(GC)에 속하는 종이 과거대비 11종이 추가로 발견되어 가장 높게 나타났고, 서식기능군의 경우 붙는무리(CL)가 41종으로 가장 많은 종이 출현하였다. 군집안정성에서는 특성군 I그룹이 2003년에 57.1%, 2018년에 61.5%로 가장 높은 출현율을 보였다. 생물학적 수질평가 결과, 과거 평균 'II등급'의 수질등급과 '보통'의 환경상태에서 2018년에는 평균 'Ia'등급의 수질과 '매우 양호'한 환경상태를 나타냈다. 2018년의 이화학적 요인과 생물학적 요인과의 상관관계 분석결과, pH 및 BOD는 개체수, 우점도지수(DI), 풍부도지수(R'), 다양도지수(H'), 균등도지수(J')에 유의한 상관관계를 나타냈다. 유사도 분석결과, 각 연도별로 두 개의 유사군으로 분류되었다. 길안천 수계가 취수시설 및 생태공원, 하천정비사업을 진행하면서 발생한 물리적 교란 이후 시간이 지남에 따라 물 흐름 개선과 다양한 미소서식처 형성을 통해 종 다양성 및 풍부도가 높게 나타난 것으로 판단되며, 향후, 제한적인 구간의 하천정비공사로 인한 하상 교란과 수질과의 상관관계가 저서성대형무척추동물의 군집구조와 군집안정성에 미치는 영향에 대해 추가적인 연구가 필요할 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.142-154
• /
• 2023

전세계적으로 환경의 중요성이 부각되면서, 원재료 준비, 생산 공정, 운송 및 설치 등 산업 전체 기간에 걸친 기후 변화 주요 물질인 탄소 배출량을 계산하고, 저감해야 한다는 필요성이 강조되고 있다. 이를 전과정평가(Life Cycle Assessment, LCA)라 정의되면서 전세계적으로 다양한 산업들에 시도되고 있다. 국내에도 일부 관련 시도들이 있었지만, 국내 재생에너지 산업에 대해서는 거의 발표되지 않았다. 이러한 연구 중요성에도 불구하고, 부진한 관련 연구의 격차를 메꾸기 위해 본 연구는 국내 육상 풍력발전 단지의 한 사례인 경북 영덕 발전에 대하여 LCA 연구를 관련 시스템 중 가장 많이 사용되는 SimaPro를 이용하여 수행하였다. 연구 결과 풍력 터빈 1대의 에너지 회수기간(EPT)는 약 10개월이며, 1 kwh의 전력을 생산하는데 배출되는 온실가스 배출량(Green House Gas, GHG,)는 15 g CO₂/kWh로 다른 에너지원과 비교해서 경쟁력 있음을 보였다. 부품 별 환경 영향 평가에서는 풍력 터빈의 타워가 여러 환경 영향 부문에 영향이 가장 크다는 결과를 보였다. 본 연구에서 얻어진 경험은 향후 신재생 에너지 보급 및 확대 정책의 강화와 대중의 인식 제고에 도움이 될 것이라고 사료된다.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.870-874
• /
• 2002

$Mg_2$$SiO_4$: Dy, Tb pellets were made by using a sintering process, including pressing and heat treatment. In the present study, the optimum parameters of the sintering for the $Mg_2$$SiO_4$: Dy, Tb pellets obtained such as the pressing pressure, the sintering temperature and the sintering time were in terms of thermoluminescence. Experimental results showed that the main peak of the glow curve for $Mg_2$$SiO_4$: Dy, Tb thermoluminescence dosimeter was clearly correlated with the energy of the UV and with the grain size. The intensity of the TL glow curve increased and its main peak position shifted to lower temperature with increasing UV irradiation time.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.540-544
• /
• 1998

Compliance calibration method is frequently used to determine $G_IC$ from the DCB composite specimen. However, the method requires at least 4 to 5 fracture test (loading-unloading) records. In this study, $G_IC$ of unidirectional graphite/epoxy DCB composites was determined from the elastic work factor approach which uses a single fracture test record. In order to inspect the validity of the elastic work factor approach, $G_IC$ determined from the elastic work factor approach was compared to that of determined from the compliance calibration method. It was shown that $G_IC$ determined from the elastic work factor approach was comparable to that determined from the compliance calibration method. That is, the elastic work factor approach can be used to determine $G_IC$ of unidirectional graphite/epoxy DCB specimen from a single fracture record.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1416-1422
• /
• 2001

The objective of this work was to characterize mechanical properties of thermoplastic composites with various forming conditions in compression molding. Randomly oriented long glass fiber reinforced polypropylene(PP) was used in this work. The composite materials contained 20%, 30%, and 40% glass fiber by weight. Compression molding was conducted at various mold temperatures and charge sizes. The temperatures on the mold surface and at the material in the mid-plain were monitored during the molding. Differential Scanning Calorimeter was used to measure crystallinity at both in-side and out-side of the sheet material. Crystallinity at each temperature was also measured by X-ray diffractometer. Dimensional stability was studied at various conditions with the spring forward angle. Among the processing parameters, the crystallization time at the temperature above 130$^{\circ}C$, was found to be the most effective. Spring-forward angle was reduced and the tensile modulus was increased as the mold temperature increased.

• 대한임상전기생리학회지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2012

Purpose : This study is to investigate the modulatory effects to the ultraviolet induced erythema of pain processing system. Methods : Thirty six healthy volunteers were divided into none treatment group (n=6), indomethacine group (n=6), subsensory level electrical stimulation group (n=6), sensory level electrical stimulation group (n=6), motor level electrical stimulation group (n=6), noxious level electrical stimulation group (n=6). Subjects were induced erythema for three times minimal erythema dose (MED) at upper arm of dermatome C6 level. Each experimental group had mechanical pain threshold (MPT), electrical pain threshold (EPT), thermal pain threshold (TPT). Results : This study revealed that we observed that pain thresholds were significantly correlated with each other in pain processing system. The effect of electrical stimulation levels evaluates were shown to be significant differences pain control effect in electrical stimulation group (sensory, motor level electrical stimulation groups) more than indomethacine group, subsensory level and control group. Conclusion : In this study, it was found that the effect of ultraviolet induced erythema of pain control by modulatory electrical stimulation.

• 환경위생공학
• /
• 제17권3호
• /
• pp.21-30
• /
• 2002

This study was Performed to evaluate the effective solidification of Cd sludge using cement and power plant fly ash as cement admixture, to identify the leaching characteristics of the heavy metal Cd sludge solidified, and to develope proper KLT(Korean Leaching Test) of hazardous waste. KLT was compared with EPT(Extraction Procedure Toxicity) and TCLP(Toxicity Characteristics Leaching Procedure). Fly ash contents ranged from 0% to 30% of cement weight. The experimental results showed that the optimum amount of fly ash replaced was 10% to 15% and KLT was less appropriate than EPA and TCLP. Also the purpose of the study was to suggest the modification factors on the leaching test currently used, based on the above mentioned aspects. The effects of pH, leaching time, leaching for agitating intensity, and leaching solvent were investigated. As the result of test, the leaching potential was relatively high when the pH and agitation intensity of leaching solution were 5 and 150rpm, respectively. Leaching time of six hours was found to be sufficient and the use of acetic acid as a leaching solvent is more useful in landfill site particularly.

• 생태와환경
• /
• 제50권3호
• /
• pp.325-336
• /
• 2017

The ecosystem in the Gwangju Stream has taken a wide range of disturbance such as the discharging water of sewage treatment plant, the lake water and the river water from different water system over the past decade. This study was figured out some significant influence factors by analyzing the relationship between biotic and abiotic factors in the urban stream. Abiotic components included 15 water quality variables which were measured in five sampling sites along the stream from October 2014 to July 2015, whereas the benthic macroinvertebrates found in those sites were used to estimate various biotic indices representing the ecological status of the community. The results of correlation analyses indicated that abiotic factors by human activities affected on the inhabitation of benthic macroinvertebrates more than biotic factors. The results of cluster analyses and ANOVA tests also showed that biotic and abiotic characteristics were clearly different in season. The main influence factors of cluster analysis by sites were $NH_3-N$, EPT(I) and DO. It was considered that more various statistical analyses would be necessary to find some different relationships and influence factors between biotic and abiotic variables in the urban stream.

• Animal cells and systems
• /
• 제16권1호
• /
• pp.69-76
• /
• 2012

This study was conducted to examine how a low-head dam removal (partial removal) could affect benthic macroinvertebrate communities in a stream. Benthic macroinvertebrates and substrates were seasonally sampled before and after dam removal (March 2006-April 2007). Benthic macroinvertebrates and substrates were quantitatively sampled from immediately upstream (upper: pool) and downstream (lower: riffle) sites, the location of the dam itself (middle), and immediately above the impoundment (control: riffle). After the removal, species richness and density of benthic macroinvertebrates as well as the EPT group (Ephemeroptera, Plecoptera and Trichoptera) increased to higher levels than those before the removal, while functional feeding groups and habitat orientation groups changed more heterogeneously at the upper site. At the lower site, species richness and density decreased somewhat immediately after dam removal, which was associated with an increase of silt and sand, but recovered after monsoon floods which helped to enhance substrate diversity at the upper site. Decreased dominance index and increased diversity index in both the upper and lower sites are evidence of positive effects from the dam removal. In conclusion, we suggest that even a partial removal of a dam, resulting in increased substrate diversity in the upper site, could sufficiently help rehabilitate lost ecological integrity of streams without major habitat changes.

• 한국물환경학회지
• /
• 제29권6호
• /
• pp.825-831
• /
• 2013

The Suwon stream which consists of a mountainous reach, an artificial reservoir and an urban reach provides benthic macroinvertebrates with various habitats. This study was conducted to find out the influence of reservoir sluice control and water quality on benthic macroinvertebrates community in the Suwon stream from June to August, 2011. As a result, substrate composition showed little difference between the upper site (S2) and the lower site of the reservoir (S3). At site S3, water velocity was fastest, and water temperature was lowest due to the intermediate depth discharge of the reservoir. Cheumatopsyche brevilineata which prefer fast water velocity was dominant at site S3. Some biotic indices (H', J, and R) of site S3 decreased significantly whereas Benthic Macroinvertebrate Index (BMI) showed little difference between site S2 and site S3. EPT showed a negative correlation with water temperature. The sluice control of the reservoir leaded variations of water velocity and temperature, and seemed to make the state of aquatic ecosystem worse.