• KSBB Journal
• /
• v.16 no.3
• /
• pp.307-313
• /
• 2001

The effects of agitaion and aeration on mycelial growth, exo-polysaccharide (EPS) production, and substrate consumption upon the submerged cultivation of G. lucidum were investigated, and the batch kinetics of the EPS fermentation of G. lucidum were interpreted as function of agitation speed and aeration rate. In a 2.6 L jar fermenter system, the optimum agitation speed and aeration rate for EPS production were determined to be 400 rpm and 1.0 vvm, respectively. The maximum production of EPS obtained was 15 g/L. The logistic model for mycelial growth fitted the experimental data better than that determined by the Monod and the two-thirds power models. The Luedeking-Piret equation adequately modelled the kinetic data obtained for product and substrate.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.5
• /
• pp.359-362
• /
• 2001

The production of an extracellular polysaccharide, EPS-R, from the marine bacterium Hahella chejuensis was investigated at various aeration rates in a batch culture. Higher aeration rate resulted in enhanced EPS production and increased the viscosity of the culture broth. At an aeration rate of 1.5 vvm, EPS-R (12.2 g/L) was obtained with a yield (Y$\_$p/s) of 0.6 from the STN medium after 72 h of cultivation. The H. chejuensis cells changed rod morphology to a short-rod form in the stationary growth phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.627-631
• /
• 2007

The factors affecting on sludge sedimentation are reported as F/M ratio, ingredient, composition of influent substrate, dissolved oxygen concentration, temperature, pH, filamentous bacteria and SRT. Aeration tank applying Bacillus sp. has an important role for maintaining the dominant microorganism species to make steady progress for spore growth affecting sedimentation. This research aims to investigate the affecting factor for the sedimentation in B3 system and RABC system with aeration tank applying tapered aeration. Extracellular polymeric substances(EPS), protein and carbohydrate can be produced for the extreme condition, that is down to 0.2 mg/L of dissolved oxygen in the aeration tank. This research found out the relation between the sedimentation and the EPS production, especially the ratio of protein/carbohydrate. The spore of Bacillus sp. was formed at the low DO then microorganisms produced EPS. The results showed that the production of EPS was 109.95 mgEPS/gSS at 1.6 mg/L of DO, however it was 131.77 mgEPS/gSS at 0.5 mg/L of DO. The sedimentation was affected by protein content in EPS and the ratio of protein and carbohydrate. The settleability of sludge was not affected by the ratio of protein/carbohydrate in B3 process, meanwhile settleability was affected by the ratio of it in RABC process, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.405-415
• /
• 2021

MMBR system has been suggested as a promising system to resolve harvesting problems induced from low settling efficiency of microalgae. And recently, a lot of research on reducing fouling at the MMBR system has investigated focused on EPS in many cases. EPS of microalgae mainly consists of polysaccharides and protein components, and is produced through photosynthesis and nitrogen-carbon metabolic pathways. Especially, P-EPS is one of major compounds which occur membrane fouling phenomenon, as its hydrophobic protein components cause floc formation and cake layer accumulation. And it is already known that almost every microalgae can metabolize P-EPS or Chl-a when nitrogen sources as a substrate is insufficient or exhausted situation. With the above backgrounds, uptake rates of P-EPS or Chl-a by Scenedesmus quadricauda according to the type of carbon source and nitrogen concentration were evaluated in order to verify correlation between carbon source vs P-EPS production, and indeed Scenedesmus quadricauda uses P-EPS or Chl-a when the amounts of nitrogen sourc es in the feed is not satisfied. As a result, it was shown that P-EPS and Chl-a production were increased proportional to nitrogen concentration under organic carbon condition. And especially, the amo unts of P-EPS and Chl-a in the cell were diminished with the nitrogen source becomes insufficient or exhausted. Because P-EPS accelerates fouling at the MMBR system, P-EPS degradation by Scenedesmus quadricauda in order to get nitrogen source may contribute to reducing fouling. About a affects of N-consumed Chl-a to the MMBR fouling, more survey is needed. On the contrary, considering the purpose of MMBR system of this study, i.e. harvesting useful high value microalgae efficiently feeding adequate industrial process wastewater, it seems like difficult to maintain satisfied metabolic activity and to harvest with high yield rate using nitrogen-poor MMBR feed.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.85-93
• /
• 2011

The structural components of microorganism are quite related to the toxin and environmental conditions. The vegetative and dormant cells are quite affected by the physical and chemical environments to survive and they will be dormant when they are in the extreme environment. The mechanism to activate the microorganisms however, is not well defined yet in the area of activation state and sporulation state through the analysis of EPS. Other than that even the main mechanism of prior to acquisition of analysis values is not well understood. Therefore, what kind of specific environment to affect the activation and sporulation will be discussed through the analysis of the extracellular polymeric substances(EPS). EPS are a high molecular weight mixture of polymers presenting both outside of cells and interior of microbial aggregates. They are a major complex materials in microbial aggregation for sustaining them together in a three dimensional matrix. Three commonly used extraction methods were applied to this study their effectiveness and quantification in extracting EPS from several Bacillus microorganisms and activated sludge. Three extraction methods used for this study are regular centrifugation with formaldehyde (RCF), Steaming, and EDTA extraction. The results of EPS contents such as the quantitative proteins, carbohydrates and the ratio of protein versus carbohydrate from the several species with the several specific methods showed in this research. This study aims to get comparable results of the quantitative production of EPS and the effectiveness of sedimentation for Bacillus microorganisms and activated sludge from several wastewater treatment plans. The results revealed that the protein amount extracted was the highest by the Steaming method of three extraction methods before sporulation and the carbohydrate amount extracted was the highest by the RCA method of three extraction methods after sporulation. The higher amount of protein compared with carbohydrate from Bacillus microorganisms affected higher sedimentation efficiency, however it could not be found the relation between the EPS production and sedimentation efficiency for the activated sludge.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.135-136
• /
• 2000

A bacterial strain producing a large amount of EPS was isolated from marine sediment sample collected from the Cheju Island, Republic of Korea. In the present study, the isolation and identification of this isolate, which is named Hahella chejuensis gen. nov., sp. nov., the effects of nutrients on the production of EPS, and some properties of this EPS are reported.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.726-731
• /
• 1999

It was discovered that ammonium phosphate in the medium played an important role in both growing mycelium and producing exopolysaccharides (EPS) from G. lucidum. In lower concentration levels of ammonium phosphate (0-3 g/l), an improved mycelial growth was observed by maintaining more filamentous morphology than in high concentrations (5-11 g/l). In addition, it was confirmed by comparing the factual dimension and frequency of the area regarding the mycelial pellets. This must be attributed to limitations of nutrient transfer by maintaining filamentous mycelium during the cultivation in a low ammonium phosphate containing medium. On the other hand, the best EPS production was observed in medium with the absence or low concentration of ammonium phosphate. The shear stress of the culture broth was greatly affected by the shear rate, as compared with that of the culture broth with high ammonium phosphate concentration. The rheological characteristics of the fermentation broth and filtrate worked well according to the Herschel-Bulkley model. It was also found that the morphological changes of the mycelium resulting from the ammonium phosphate concentration directly affected the rheological characteristics of the system and resulted in reversely affecting the EPS production levels. Based on these results, it can be concluded that delicate regulation of the ammonium phosphate concentration in the culture media should be provided in order to obtain optimal mycelial growth and/or EPS production.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.27-31
• /
• 2008

The optimization of submerged culture conditions for mycelial growth and exopolysaccharide (EPS) production in an edible mushroom Tremella fuciformis were studied in shake flasks and bioreactors. The temperature of $28^{\circ}C$ and pH 8 in the beginning of fermentation in agitated flasks was the most efficient condition to obtain maximum mycelial biomass and EPS. The optimal medium constituents were as follows (g l-1): glucose 20, tryptone 2, $KH_2PO_4$ 0.46, $K_2HPO_4$ 1 and $MgSO_4H_2O$ 0.5. The fungus was cultivated under various agitation and aeration conditions in a 5L stirred-tank bioreactor. The maximum cell mass and EPS production were obtained at a relatively high agitation speed of 200 rpm and at an aeration rate of 2 vvm. The flow behavior of the fermentation broth was Newtonian and the maximum apparent viscosity (35 cP) was observed at a highly aerated condition (2 vvm). The EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor. The EPS was protein-bound polysaccharides consisted of mainly mannose, xylose, and fructose. The molecular weights of EPS were determined to be $1.3{\sim}1.5{\times}10^6$.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.35-39
• /
• 2017

We used a construction method using a CNC milling machine, where free-formed molds were made by cutting EPS (Expanded PolyStyrene) foam with the CNC machine, to build free-formed buildings. CNC milling is off-the-shelf technology that can easily cut EPS foam; however its production cost is too high and the time to manufacture an EPS mold is too long. This paper proposes a novel cutting machine with a fast and cost effective mechanism to manufacture EPS concrete molds. Our machine comprises a cutter and Cartesian coordinate type moving mechanism, where the cutter cuts EPS foam using a hotwire in the shape of '$\sqcap$' and is capable of adjusting its cutting angle in real-time while keeping its cutting width. We proved through cutting experiments on the CNC machine that cutting time was greatly shortened compared to the conventional method and that the resulting concrete mold satisfied manufacturing precision.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.337-341
• /
• 2001

This study was carried out to screen the effective polymeric additives preventing wall growth during mycelial submerged cultivation of Ganoderma. lucidum. Effects of additives on mycelial growth and exo-polysaccharide (EPS) production in flask culture and jar fermenter system under 3 different pH processes were investigated, and changes of mycelial morphology were also examined. From flask culture of G. lucidum with additives of different concentrations, 0.1%(w/v) polyacrylic acid was effective for EPS production. As the polyacrylic acid of 0.1%(w/v) was added in medium, wall growth of G. lucidum mycelium grown in jar fermenter system could be protected. The addition of 0.1%(w/v) polyacrylic acid to medium was also improved the mycelial growth and EPS production in the later of submerged culture G. lucidum and no changes of mycelial morphology were observed.