• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.738-741
• /
• 2001

We carried out aminolyses of various rigid polyurethane foams (PUFs) using diethylene triamine and studied application of the aminolysis products as hardners of epoxy resins. Diglycidyl ether of bisphenol A was used for the study on the curing behavior of epoxy resin with the aminolysis product employing differential scanning calorimeter. Curing reaction of the epoxy resin is generally known to be autocatalytic second order reaction. We found that the curing reaction of the epoxy resin with the aminolysis product of rigid PUF did not show autocatalytic characteristics but followed the n-th order kinetics. The activation energy of the curing reaction of the epoxy resin with the aminolysis product of rigid PUF made from sugar based polyol was slightly lower than that of the epoxy resin with aminolysis product of rigid with made from amine based polyol.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.141-144
• /
• 2006

In this study, the friction and wear characteristics of pure epoxy and silica-filled epoxy resin composites with average silica particle diameter of $6-33{\mu}m$ were investigated at ambient temperature by pin-on-disc friction test. The cumulative wear volume, friction coefficient and wear rate of these materials against SiC abrasive paper were determined experimentally. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on diameter of the silica particle for all these composites. The sliding wear tests of the materials demonstrated that the friction coefficient and the wear rate of silica filled epoxy composites were lower than those of the pure epoxy. silica filled epoxy.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.465-470
• /
• 2015

에폭시 아스팔트 혼합물은 에폭시 수지와 경화제의 화학반응이 진행되어 양생시간을 거쳐 성능 발현이 이루어진다. 에폭시 아스팔트의 양생수준은 후속공정의 진행과 교통개방 및 공정계획의 수립에 절대적인 영향을 미치므로 정확한 예측모델의 개발이 중요하다. 본 연구에서는 기존 예측식에 사용되는 인자들의 화학적 의미 분석을 통하여 에폭시 수지의 농도와 경화특성을 반영하여 기존식보다 확대된 적용 범위를 갖는 양생수준 예측식을 제시하였다. 실외양생 실험과 비교 결과 상관계수가 0.971 이상으로 나타나 조성이 다른 에폭시 아스팔트 혼합물의 온도와 시간에 따른 양생수준을 예측할 수 있는 것으로 나타났다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.158-165
• /
• 1995

A new fungible materal named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic chatateristics comparing with a conventional cast iron material. The dimensions of new colum structure are adjusted to keep the same stiffness (El value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up. one of which is for the measurement of natural mode and frequency using experimental modal analysis and the other one is for the measurement of vibration amplitude during idling operation of a machine fool. The comparison of maximum, accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measued on the bed motor base and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite materal exhibits a good anti-vibrational property even if it is used under the actual operational environments of machine eool as a practical structural element.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.145-151
• /
• 2012

Polymer alloys of poly(ethylene terephthalate)(PET) and nylon6(PA6) which were not miscible each other by themselves were successfully prepared through melt compounding using a twin-screw extruder by utilizing epoxy as reactive compatibilizer. At the epoxy(DGEBA) amount of 0.5~2wt%, the domain size(average diameter) of the discontinuous phase could be reduced up to 0.2${\mu}m$ from 1-5${\mu}m$ that of the simple blend without epoxy. The reaction was presumed to happen mostly at interphase from the result of maximum increase of melt viscosity at the middle range of PET/PA6 blend ratio. It is expected that alloy fibers of PET/epoxy/PA6 with enough mechanical strength for use can be prepared.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.137-146
• /
• 2014

The important drawback of epoxy electrodeposition(ED) coatings is the lack of the weathering resistance caused by the structure of bisphenol A. To improve this yellowing phenomena, acryl ED coatings have been developed. Compared with the epoxy ED coatings, however, acryl ED coatings are relatively weak in the corrosion resistance and mechanical properties. The purpose of this study is complemented their drawbacks by mixing epoxy and acryl ED paints. The salt spray, accelerated weathering test(QUV) and cupping, bending, impact test were employed to investigate the corrosion resistance, weathering resistance, and mechanical properties of ED coatings. When the ratio of acryl to epoxy resin of ED coating is 0.33, the weathering resistances are appropriately improved in condition maintaining the corrosion resistance. It was shown that the weathering resistance for epoxy ED coating was adjusted by optimally mixing acryl ED paint.

• 접착 및 계면
• /
• 제13권2호
• /
• pp.53-57
• /
• 2012

Anisotropic conducting film (ACF)을 형성하기 위해서는 경화과정에 잠재성이 있어야만 하며, 보다 빠른 생산성을 갖기 위해서는 반응속도가 매우 높아야 한다. 이 연구에서는 여러 가지의 sulfonium 염들을 합성해서 epoxy 수지의 잠재성 경화제로 사용해 보았다. 이들 sulfonium 염들은 모두 우수한 잠재성을 보여 주었다. Differential scanning calorimetry (DSC)를 이용해서 이들의 경화거동을 살펴보았으며, $150^{\circ}C$에서의 경화 속도를 탐침법으로 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.468-469
• /
• 2007

$SF_6$ gas used widely as insulating component in electric power industry has excellent in insulation and arc extinguishing performance in gas-insulated switchgear. However, the concern about eco-friendly alternative gas is currently rising, because $SF_6$ gas is one of the main greenhouse gases. As one of the study for $SF_6$ free technology, composite-insulation technology is focused in this paper. To analyze the influence by epoxy thickness change, the composite-insulation composed of dry-air and epoxy was used in this paper. To analyze AC breakdown by the epoxy thickness, needle-plane electrode was used and needle was molded by epoxy. Under the gas pressure ranged from 0.1 to 0.6MPa, the breakdown voltage of dry-air were measured in AC electric field. The data of composite-insulation were acquired by changing the thickness of epoxy used in each composite-insulation under the same condition.

• 한국재료학회지
• /
• 제18권10호
• /
• pp.542-546
• /
• 2008

$BaTiO_3$/epoxy composites can be applied as the dielectric materials for embedded capacitors. The effects of the degree of $BaTiO_3$ particle agglomeration on the dielectric properties of $BaTiO_3$/epoxy composites were investigated in the present study. The degree of particle agglomeration was controlled by the milling of the agglomerated particles. The size and content of the agglomerated $BaTiO_3$ particles decreased with an increase in the milling time. The dielectric constants and polarizations of $BaTiO_3$/epoxy composites abruptly decreased with the increase of the milling time. It was concluded that the dielectric constants and polarizations of $BaTiO_3$/epoxy composites decreased as the degree of particle agglomeration decreased. The degree of agglomeration of $BaTiO_3$ particles turned out to be a very influential factor on the dielectric properties of $BaTiO_3$/epoxy composites.

• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.74-84
• /
• 1990

The machine tool structures for ultra-precision machining muxt be manufactured with materials which have high static and dynamic stiffness, high damping, a long term dimensional and thermal stability. This study aims at the development of new composite material Epoxy-Granite which exhibits the satisfactory characteristics as a material of ultra-precision mchine tool bed. The Epoxy-Granite testpieces that use epoxy resins as a binder and granite particles as a aggregate have been manufactured so as to examine the material properties about mechanical, thermal and damping characteristics. Experiments were carried out to obtain the proper manufacturing conditions of Expoxy-Granite specimens by varying the several testing conditions such as types of epoxy resins, particle sizes of granite and mixture ratio of epoxy resin and aggregate. Also, when Epoxy-Granite was compared with cast iron, GRANITAN which was imported from CMS of U.K. and granite materials, it has exhibited the superior or almost the same mechanical and damping properties and thermal conductivity, except for the thermal expansion.