• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.105-113
• /
• 2017

The curing behavior, mechanical properties, hot-air aging resistance, abrasion properties,thermal properties, etc., of EVM/EPM/APP (ammonium polyphosphate)/DPER (dipentaerythritol)/EG (expandable graphite) and EVM/EPM/ATH (aluminium trihydroxide) flame retarding systems in ethylene vinyl acetate rubber (EVM) blends with EPM (ethylene propylene rubber) were sequentially examined. For both flame retarding systems, the torque values increased with the content of EPM rubber and with the vulcanization time. As the content of EPM rubber increased, the scorch time became shorter, whereas the optimum cure time followed an increasing trend. For the EVM/EPM/APP/DPER/EG flameretarding system, as the content of EPM rubber increased, the hardness did not change,whereas the tensile strength and elongation at break decreased. A hot-air aging resistance test at $150^{\circ}C$ showed that the heat resistance decreased with the EPM content regardless of the kinds and contents of flame retardants. As the EPM content increased, the abrasion rate became higher and the abrasion resistance of the EVM/EPM/APP/DPER/EG flame retarding systems exceeded that of the EVM/EPM/ATH flame retarding counterparts. In comparison with the EVM/EPM/ATH flame retarding systems, the thermal stability of the EVM/EPM/APP/DPER/EG flame retarding system showed an increasing tendency.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.20-30
• /
• 1999

In this study, binary polyamide 6,6(PA 6,6)/ethylene-propylene rubber(EPM) or EPM-g-maleic anhydride(EPM-g-MA) blends and ternary PA 6,6/EPM/EPM-g-MA blends with various elastomer content were prepared in order to investigate the degree of influence of elastomer content and average particle size, morphology, and distribution of dispersed elastomer on mechanical and thermal properties of blends. According to the results, notched Izod impact strength and relative crystallinity of binary blends modified with EPM-g-MA as well as average particle size and distribution of dispersed elastomer in such blends were more improved than those of binary blends modified with EPM. Notched Izod impact strength of blend whose composition ratio(wt % ) was 70:30(PA 6,6 : EPM-g-MA) was the highest among the binary PA 6,6/EPM-g-MA blends. The impact strength was increased by 25 times and its relative crystallinity was increased by 7 times when compared with those of polyamide 6,6. In the case of ternary PA 6,6/EPM/EPM-g-MA blend of which composition ratio was 70:15:15(PA 6,6:EPM:EPM-g-MA), the elastomer was finely distributed with the average particle size of $0.56{\mu}m$. The Izod impact strength of this blend was the highest of all blends prepared with different elastomer content.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.682-689
• /
• 1999

In this study, binary PA 6,6/EPM(or EPM-g-MA) blends and ternary PA 6,6/EPM/EPM-g-MA blends were fabricated according to the variation in elastomer content and composition ratio of blend, and mixing temperature and rate so as to investigate the degree of influence of elastomer content and average particle size, morphology, and distribution of dispersed elastomer on properties of blends. As results, under the constant mixing rate(250 rpm) and different five section temperature profiles(270-265-265-255-$255^{\circ}C$) in extruder, high notched Izod impact strength was the property of PA 6,6/EPM-g-MA(70/30) blend among binary blends. Notched Izod impact strength of this blend was 25 times improvement compared with that of polyamide 6,6. In addition, elastomer average particle size of ternary PA 6,6/EPM/EPM-g-MA(70/15/15) blend was $0.56{\mu}m$, which was fine distribution, and notched Izod impact strength of that blend was the highest of all blends prepared with the variation in elastomer content. But the properties of this ternary blend were decreased remarkably at the diverse mixing temperatures and mixing rates.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.783-792
• /
• 2002

This experiment was conducted to investigate the effects of supplementary level of extruded poultry manure, corn and tapioca mixture (EPM) on growth performance, nutrient digestibility and body composition in korean native goats. Total 15 heads of Korean native goats (10 kg B.W.) were randomly assigned into five treatment groups (EPM 10, 20, 30, 40% and control.) and feeding trial was done for six weeks with ad libitum. Protein level of the extrudate with poultry manure was directly proportional to corn supplements rate. NFE and Ca content in EPM also were functional of the tapioca supplements levels. Daily body weight gain was significantly (p<0.05) reduced in EPM 40% group, but no significant differences were observed in other groups. Concentrate feed intake was high in EPM 10 to 30% groups, compared to the control. Feed conversion ratio also was relatively higher in EPM groups than in the control. As EPM level increased, dry matter digestibility was proportionally decreased, but that of crude protein was enhanced. Dressed carcass percentage was significantly (p<0.05) reduced with the increase of EPM level, showing control 49.7, EPM 10% 49.8, EPM 20% 48.3, EPM 30% 47.9 and EPM 40% 45.2, respectively.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.281-286
• /
• 2001

EPM은 전사원을 이익확보 프로세스에 참여하게 하는 데 있다. 이익성과에 대한 기여도에 따라 전사원이 몸으로 체감하는 경영관리를 실시해야 한다. 이익을 확보하고 계속적인 성장을 하여 초일류 기업으로 발전하게 하는 데 EPM은 구체적인 방법론을 제시한다. 기업이 계속적으로 발전하기 위해서는 지식경영시스템을 구축하여 지능형 기업, 진화하는 기업구조 만들어야 한다. 전사적 이익관리(EPM)는 RTCP에 의해 이익 중심의 기업경영으로 기업성장의 틀을 제공한다.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.77-82
• /
• 2000

The stereoselective ligand exchange reaction of trans-$[Co(SS-epm)Cl_2]^+$ and racemic propane-1,2-diamine (rac-pn) produces the complex that is identified as $[CO(N)_6]^{3+}$ type of $[Co(SS-epm)(pn)]^{3+}$ by absorption spectrum. It is conceivable that the reaction mechanism involves substitution and isomerization. The calculated and experimentally determined ratios of the complexed enantiomeric substrates at equilibrium were as follows: $[Co(SS-epm)(pn)]^{3+}$,calcd 32 % / 68 %, exptl 19 % / 81 % R-pn / S-pn. It has been shown that the employment of molecular mechanics calculations as a predictive tool may lead to the design of chiral complexes that may be applied to the separation of racemic mixtures of simple bidentate ligands.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.133-141
• /
• 2008

The need for total enterprise management that covers from accepting orders, design, cost, procurement, manufacture, and delivery has been recently raised in order for efficient project management of small and medium size plant construction enterprises. This trend is reflected in the introduction of EPM(Enterprise Project Management) solutions by some shipbuilding enterprises and large construction corporations. In step with the trend, small and medium size plant construction enterprises are enabled to provide knowledge base in terms of reducing cost and production period and managing portfolio for accepting orders and attaining contract by inducing customized EPM This study presents a design of customized EPM based on a case study of a company. It exhibits a collaborative/collaboration resource-supply model which can be universally applied to small and medium size job-order production enterprises. The research discusses that under the assumption that information is shared internally between departments on planning, supply, manufacture, and quality control in order to create collaborative environment and close participation is created externally between suppliers and orderers, productivity can be improved in cost reduction through planning efficient collaborative supply model.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.140-141
• /
• 1995

• Elastomers and Composites
• /
• v.25 no.2
• /
• pp.97-102
• /
• 1990

Linear viscoelastic properties of 11 types of EPDM and 1 type of EPM rubbers have been measured at $210^{\circ}C$, using a RDS(Rheometrics dynamic spectrometer). The data base, i.e., complex viscosity, storage modulus, loss modulus, loss tangent and relaxation spectrum of the sample should be useful for rubber blending and compounding.

• Journal of the korean veterinary medical association
• /
• v.46 no.3
• /
• pp.245-263
• /
• 2010

말 원충성척수뇌염(equine protozoal myeloencenphalitis; EPM)은 말에게 심각한 신경성 질병을 일으키는 원충성 질병으로서 Sarcocystis neurona가 원인체이다. 근육포자낭(sarcocyst)을 숨기고 있는 자연중간숙주를 포함한 S. nuerona의 완전한 생활사는 알려져 있지 않으나 주머니쥐의 일종인 opossum(Didelphis virginiana, Didelphis albiventris)이 최종 숙주이며, 말은 정상적 숙주로 알려져 있다. 왜냐하면 말에서는 분열체(schizonts)와 분열소체(merozoites)가 발견되기 때문이다. EPM 유사 질병들이 고양이, 밍크, 너구리, 스컹크, 태평양 점박이 바다표범, 포니, 바다수달 등을 포함한 다양한 포유류에서 발생한다. 고양이는 포자낭(sporocytes) 섭식 후 근육포자낭 단계를 숨기는 실험적인 중간숙주로서 역할을 할 수 있다. 최근 국내에서 신경증상을 나타내는 말에 대한 의심스러운 임상증상이 임상수의사들에 의해 관찰되어졌는, 정확한 진단을 하기위하여 S. nuerona에 의해 발생된 EPM의 역사, 구조, 생활사, 생물학, 병리론, 동물에서 질병 유도, 임상 증상, 진단, 병인론, 생태학, 치료 등에 대하여 알아보고자 한다.