• 제목/요약/키워드: EPDM rubber

검색결과 206건 처리시간 0.024초

Polyorganosiloxane 변성 말레화 EPDM/EPDM 방진고무의 제조와 그 특성 (Preparation and Properties of Polyorganosiloxane Modified Maleated EPDM/EPDM Rubber Vibration Isolator)

  • 강두환;김소미
    • 공업화학
    • /
    • 제21권5호
    • /
    • pp.581-585
    • /
    • 2010
  • 산업폐기물 중의 하나인 무기 금속화합물, Alnico를 1,3,5-trimethylcyclotrisilazane으로 표면 처리하여 충전제로 하고 EPDM에 maleic anhydride (MA)를 용융 중합법으로 그라프트시켜 제조한 말레화 EPDM과 ${\alpha},{\omega}$-bis(3-aminopropyl)polydimethylsiloxane을 공중합시켜 제조한 말레화 EPDM-polydimethylsiloxane공중합체(MEPDM-PDMS)와 EPDM 및 표면처리된 Alnico를 compounding하여 composite rubber를 제조하였다. EPDM/Alnico/MEPDM-PDMS 방진고무는 MEPDMPDMS와 EPDM을 중량비로 1 : 10으로 하고 또한 충전제의 함량을 EPDM에 대하여 25, 50 phrs로 그리고 개시제로 dicumyl peroxide (DCP)를 첨가하여 compounding시킨 다음 유압 고온 프레스로 가교시켜 제조하였다. 제조한 composite rubber의 열적특성을 측정한 결과 MEPDM-PDMS를 첨가하여 제조한 시료의 Tg가 EPDM만으로 제조한 고무보다 약간 낮은 $-33^{\circ}C$ 부근으로 나타났고 DMA의 측정결과 손실계수 tan ${\delta}$는 MEPDM-PDMS을 혼합한 경우가 더 크게 나타나는 것으로 보아 방진 특성이 우수함을 확인하였다.

Butyl고무와 EPDM고무 블렌드의 경화특성, 물리적 성질 및 내오존성 (Cure Characteristics, Physical Properties and Ozone Resistance of Butyl Rubber and EPDM Rubber Blends)

  • 박찬영;황영배
    • Elastomers and Composites
    • /
    • 제46권4호
    • /
    • pp.329-334
    • /
    • 2011
  • 일반적으로 butyl 고무(IIR : isobutylene isoprene rubber)는 우수한 내기체투과성 및 저반발 탄성체로서 우수한 충격흡수성을 갖는다. 본 실험에서는 butyl고무에 EPDM(ethylene propylene diene monomer)을 기계적 혼련법으로 blend 혼련물을 제조하여 이들의 가교 거동, 물리적 성질 및 내오존성 등을 측정하였다. EPDM 고무량이 증가할수록 최적 가황시간이 단축되는 경향을 보였다. 기체투과속도 테스트에 의한 내기체투과성 측정 결과 butyl고무량이 50 wt% 이상일 경우에는 기체투과도가 현저히 감소하였다. 한편 butyl rubber/EPDM 블렌드의 경우에 EPDM의 함량이 25 wt.% 이상 함유될 경우 내오존성이 향상되어 50 pphm, $50^{\circ}C$, 120시간 조건에서도 아무런 표면변화가 없었다.

Mechanical Property, Thermal Conductivity, Rebound Resilience and Thermal Property of Chloro Isobutylene Isoprene Rubber/Ethylene Propylene Diene Monomer Blend

  • Hwang, Young-Bea;Lee, Won-Ki;Park, Chan Young
    • Elastomers and Composites
    • /
    • 제53권2호
    • /
    • pp.80-85
    • /
    • 2018
  • Chloro isobutylene isoprene rubber (CIIR) and ethylene propylene diene monomer (EPDM) compounded with other formulation chemicals, depending on the polymer blend, were prepared by mechanical mixing. After manufacturing the rubber vulcanizate by compression molding with a hot press, the mechanical and thermal properties including thermal conductivity, rebound resilience of the CIIR/EPDM blends were measured. As the EPDM rubber content increased, hardness and tension set showed a tendency to increase. Pure CIIR exhibited the lowest tensile strength; however, tensile strength increased with loading of EPDM rubber. On the other hand, in CIIR rubber, which is usually a low-rebound elastomer owing to a high damping effect, rebound resilience exhibited an increasing trend as the content of EPDM rubber increased. As the EPDM rubber content increased, thermal stability was improved due to reduction of decomposition rate in the rubber region of the blend vulcanizate.

폐 EPDM 고무의 재활용을 위한 기초적 연구 (A Study on Recycling of EPDM Reclaimed Rubber)

  • 장두희;김지훈;김영주
    • 한국환경과학회지
    • /
    • 제19권3호
    • /
    • pp.365-370
    • /
    • 2010
  • In this study, we carried out the evaluation of EPDM(Ethylene Propylene Diene Monomer) reclaimed rubber mixing with natural rubber at various mixing ratio to reuse as rubber filler. The scorch time and moony viscosity was analyzed to evaluate the effect of cure behavior. And also, we analyzed the tensile strength, the elongation at break and cure time to evaluate the variation of cure behavior. As the results, the scorch time and optimal cure time was decreased according to the increasing of EPDM reclaimed rubber. However, the moony viscosity was increased at each mixing ratio. In case of the added EPDM reclaimed rubber was 20 phr(parts by weight per 100 parts by weight of rubber), the hardness and specific gravity was increased a little. The hardness and specific gravity was increased in rapidly under 40 phr of the added EPEM reclaimed rubber. The tensile strength and elongation at break of the compound of natural and EPDM reclaimed rubber was rapidly decreased compared with its natural rubber when the ratio of adding EPDM reclaimed rubber was over 40 phr.

폐 EPDM을 이용한 고무 복합 소재 개발 (Development of Rubber Composite Materials Using Waste EPDM)

  • 박동규;홍여주;정극민;김진국
    • Elastomers and Composites
    • /
    • 제47권2호
    • /
    • pp.121-128
    • /
    • 2012
  • 제대로 재활용되지 못하고 있는 폐 EPDM 즉, 자동차 Weather strip이나 세탁기 가스켓 등에서 재생한 폐EPDM 분말을 적합하고 경제성있는 Polyolefin계 Elastomer와 수지(Binder), 그리고 Filler 및 기타 첨가제를 선정하여, 다양한 배합조건으로 고무 복합소재를 압출 제조하였다. 본 실험에 유익한 기초 실험으로서, 폐 EPDM의 초음파처리 효과, 폐 EPDM복합소재의 폐타이어 복합소재와의 물성 비교, Virgin EPDM과 Devulcanized EPDM과의 비교, 그리고 12 축압출기로 압출한 재료의 물성에의 영향을 고찰하였다. 폐 EPDM을 이용하여 인조잔디 충전재와 카매트용 복합소재를 2 축압출기를 사용하여 압출한 후, 인장시편을 사출하여 인장강도, 신율, 경도의 세가지 물성을 주요 평가지표로 삼고 경제적인 배합처방을 개발하였다.

실리콘/EPDM고무 블렌드의 제조와 특성에 관한 연구 (Study on Manufacturing and Characteristics of Silicone/EPDM Rubber Blend)

  • 김진국;이형규
    • 폴리머
    • /
    • 제25권3호
    • /
    • pp.406-413
    • /
    • 2001
  • 고분자의 블렌드는 새로운 성질을 가지는 재료의 제조를 위한 하나의 방법으로 제시되고 있다. 그러나 대부분의 재료는 재료사이의 점탄성, 표면에너지 그리고 상호결합력의 차이로 인하여 비상용성을 지니며, 이로 인하여 블렌드물은 예상되는 물성을 나타내지 못하는 경우가 있다. 실리콘 고무는 우수한 내열성과 전기적 성질을 가지며, ethylene propylene diene monomer (EPDM) 고무는 우수한 기계적 물성을 지니고 있다. 본 실험에서는 실리콘과 EPDM 고무의 블렌드를 통한 전기적 성질과 기계적 물성이 우수한 새로운 기능성 재료의 개발에 목적을 두었다.

  • PDF

산기관용 멤브레인 고무판의 환경내구성 향상을 위한 EPDM 고무의 개질 (Modification of EPDM Rubbers for Enhancement of Environmental Durability of Aerator Membrane)

  • 안원술
    • 한국환경과학회지
    • /
    • 제17권1호
    • /
    • pp.107-112
    • /
    • 2008
  • A study on the enhancement of environmental durability of EPDM rubber materials for the aerator membrane was performed using a butyl rubber as a modifier. A conventional EPDM rubber formulation was evaluated as having about 26.0 wt% or more oil content from the chloroform immersion test. These oils would be gradually and continuously deleted from the aerator membrane when directly exposed to a waste-water or chemically corrosive fluids, making the membrane less flexible and the performance worse. To improve this, a butyl rubber (IIR) was utilized as the modifier for a low-ENB type of EPDM rubber formulation with low-oil content. The environmental durability of the IIR-modified EPDM rubber material was expected to be greatly enhanced compared to the conventional one. However, the mechanical and performance properties such as elongation, tensile strength, and air bubble size, etc. were still maintained as good as in the conventional one. Furthermore, TGA analysis of the IIR-modified EPDM material showed that there would be partially compatible between IIR and EPDM. It also showed that the initial degradation temperature of the IIR-modified EPDM could be somewhat increased, exhibiting the enhanced compatibility among the components and, thereby, more enhanced environmental durability.

Crosslinked IIR의 블렌드비에 따른 EPDM의 내기체투과특성 향상 (Gas Impermeability Enhancement of EFDM/Crosslinked IIR Blends)

  • 김현준;정일현;홍인권;박재우
    • Elastomers and Composites
    • /
    • 제33권3호
    • /
    • pp.193-200
    • /
    • 1998
  • 고무소재는 다양한 종류별로 구조에 따라 다른 물성을 갖는 것으로 알려져 있다. 일반적으로 EPDM 고무는 내후성과 내오존성이 뛰어나고 열이나 냉기, 습기의 노출에도 잘 견디는 것으로 밝혀진 바 있다. 한편 crosslinked IIR은 물과 기체투과에 대한 저항성이 큰 것으로 알려져 두가지 성분의 장점을 갖도록 EPDM/crosslinked IIR의 블렌드를 새로운 형태의 소재로 추천할 수 있다. 따라서 본 실험에서는 EPDM과 crosslinked IIR의 블렌드비를 변화시키면서 가교시간과 블렌드후 물리/화학적 특성의 개선을 목표로 하였다. 결과적으로 30wt.%의 crosslinked IIR 조성을 갖는 블렌드소재가 내후성, 내오존성 및 내기체투과 특성이 뛰어나, O-링이나 전기관련 제품에 상업적으로 응용가능한 것으로 판단되었다.

  • PDF

Trans-octylene rubber(TOR)의 첨가가 NBR/EPDM 고무블렌드의 물성에 미치는 영향 (Effect of trans-octylene rubber(TOR) on the properties of NBR/EPDM rubber blends)

  • 신영식;장영욱
    • Elastomers and Composites
    • /
    • 제35권2호
    • /
    • pp.149-156
    • /
    • 2000
  • trans-octylene rubber(TOR)를 비상용성 블렌드인 NBR/EPDM(70/30)에 첨가하고, 이에 따른 혼합 특성 모폴로지 및 물성의 변화에 관하여 조사하였다. TOR이 첨가됨으로써 블렌드 시 혼합에너지가 감소하였고, 혼합 시 수반되는 온도상승도 저하됨을 볼 수 있었다. 블렌드의 모폴로지를 SEM으로 관찰한 결과, EPDM이 NBR 매트릭스에 분산된 형태인 것을 알았으며, TOR의 첨가에 의해 분산상인 EPDM상이 균일하고 미세해지는 것이 관찰되었다. TOR이 첨가됨으로써 NBR/EPDM의 인장강도, 파단신율 및 모듈러스 둥의 인장물성이 향상되었다. 오존저항성은 임계 응력-변형관계로부터 정량적으로 평가하였으며, TOR이 첨가된 블렌드에서 오존크랙을 일으키는 임계에너지값이 증가됨을 알 수 있었다. TOR의 첨가로 인한 NBR/EPDM 블렌드의 물성 향상은 모폴로지의 미세화와 사슬얽힘으로 인한 가교밀도의 변화 때문인 것으로 판단된다.

  • PDF

신발겉창 재료용 열가소성 폴리우레탄 (TPU)/에틸렌-프로필렌-디엔 고무와 TPU/부타디엔 고무 블렌드 (Thermoplastic Polyurethane (TPU)/Ethylene-Propylene-Diene Monomer Rubber (EPDM) and TPU/Polybutadiene Rubber (BR) Blends for the Application of Footwear Outsole Materials)

  • 김지후;김규현
    • Elastomers and Composites
    • /
    • 제48권3호
    • /
    • pp.195-200
    • /
    • 2013
  • 본 연구의 주요 목적은 신발 겉창 재료로 사용하기 위하여 열가소성 폴리우레탄 (TPU)의 내마모성과 습윤시의 내슬립성을 에틸렌-프로필렌-디엔 고무 (EPDM) 또는 폴리부타디엔 고무 (BR)를 블렌드하여 향상시키는 것이다. 10 wt%의 EPDM 또는 BR이 TPU에 투입되었을 때 TPU/EPDM과 TPU/BR 블렌드는 TPU보다 우수한 NBS 내마모도, 인장 물성 그리고 습윤 내슬립성을 보였다. 10 wt% 이상 투입될 때는 내마모도와 인장 물성 모두 감소하였다. 10 wt% 투입시의 내마모도와 인장물성 상승은 TPU의 상분리도 증가에 기인하는 것으로 보인다.