• 접착 및 계면
• /
• 제2권4호
• /
• pp.24-31
• /
• 2001

용융 흐름성이 다른 폴리프로필렌(Polypropylene, PP)을 에틸렌-프로필렌 고무(EPR) 또는 에틸렌-프로필렌-디엔 단량체 고무(EPDM) 및 카르복실산 그룹을 갖고 있는 에틸렌 공중합체와 이축 압출기로 용융 혼합한 후 사출성형으로 고분자 블렌드 시편을 제조하였다. 제조된 블렌드의 기계적 특성과 시편의 두께 방향에 따른 모폴로지 변화를 조사하였으며 적외선 분광법(ATR-IR)을 이용하여 표면에서의 카르복실산 그룹의 상대적 피크 크기를 비교하였다. 단면의 모폴로지 조사에서 중앙부에는 PP 연속상에 고무 도메인이 골고루 혼합되어 있지만 표면쪽은 PP가 층을 이루고 있는 경사구조가 관찰되었다. PP의 흐름성이 클수록 블렌드의 인장강도 및 충격강도가 작아졌으며 EPR보다 EPDM을 고무성분으로 사용한 PP계 블렌드가 PP의 흐름성에 대한 영향을 적게 받았다. 또한 PP의 흐름성이 클수록 카르복실산 그룹이 표면에 많이 존재하였다.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.37-46
• /
• 2004

The aim of this study was to develop the recycling methode of alloyed recycling plastics. The compatibilizers have been used to improve the physical properties of recycling plastics. Eethylene propylene rubber(EPR), ethylene propylene diene monomer(EPDM), styrene ethylene butylene styrene block copolymer(SEBS), maleic anhydride modified styrene ethylene butylene styrene block copolymer(SEBS-MA) and styrene butadiene styrene block copolymer(SBS) were singled out as compatibilizers. In this study, the physical properties such as impact and tensile strength have improved above 20% by using the compatibilizers.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.159-165
• /
• 2006

Many rubber products are used in industrial products such as various hoses, rubber belts and oil seals etc. Especially, more then 200 rubber parts are used in the automobile, but design technology of these is largely dependent on Held experiences. These methods brought about too much time and cost in the developing procedures. However, with the help of recent rapid development of non-liner computer analysis, we can develop new sound products at low cost. Therefore in this study, optimizations of design variables such as location and number of gate in order to develop CLIP rubber product made of EPDM were performed by CAE in which Cross-WLF equations are adopted. The validity of proposed variables is evaluated by comparison with real forming results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.144-147
• /
• 2000

The effect of accelerated aging test on ethylene-propylene-diene monomer(EPDM) rubber used for outdoor insulation was studied by X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM), FFT spectrum alalysis, and electrical pulse counts using PC by oscilloscope(300 MHz). In electrical alalysis, FFT spectrum analysis indicated arcing caused a significant increase in the third harmonic content of the leakage current of polluted insulator. Also, pulse counts increased as aging time. The surface oxygen and aluminum content were found to increase and that of carbon and nitrogen were found to decrease with time. The detailed XPS analysis indicated that the concentration of carbon in C-C decreased and concentration of highly oxidized carbons increased with time, which was due to the oxidation of EPDM rubber polymer SEM analysis indicated that crack and erosion of EPDM rubber occurred with time.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.150-157
• /
• 2018

Fatigue properties of rubber are one of the most important characteristics in the rubber industry. In this study, the fatigue properties of MREs (magneto-rheological elastomers) based on NR (natural rubber), EPDM (ethylene-propylene diene monomer), and AEM (ethylene/acrylic elastomer) were investigated. For comparison, MREs with a Shore hardness of 60A were prepared. According to the relative results, the fatigue properties of EPDM MRE were the worst. Thus, we investigated methods to improve the fatigue properties of EPDM MRE by varying the carbon black content and curing systems of EPDM as the matrix of the MRE. Dynamic properties were measured using a fatigue tester and an RPA (rubber process analyzer), and the XPS (X-ray photoelectron spectroscopy) was used to analyze the curing system of the EPDM matrix. According to the results, the Payne effect increased and the fatigue resistance decreased as the carbon black content increased. In case of the curing system, the CV (conventional vulcanization) system was superior to the EV (efficient vulcanization) system in terms of the fatigue resistance. This was because the number of flexible bonds in the case of the CV system was higher than that in the case of the EV system. However, the EV system showed excellent mechanical properties because it had many monosulfidic bonds with strong binding energy.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2013년도 추계학술대회 초록집
• /
• pp.221-222
• /
• 2013

다양한 첨가제가 들어가는 고분자 화합물(compound)의 제조에 있어 난연 발포 보조제인 팽창흑연(Expandable Graphite, EGP)은 흡유가가 낮기 때문에 비교적 많은 양을 첨가해도 혼합(Mixing)이 잘 되는 것으로 알려져 있다. 본 논문에서는 대표적인 인계 난연제 APP(Ammonium Polyphosphate)를 사용한 난연 EPDM(Ethylene Propylene Diene Monomer) 폼에 팽창흑연 첨가량을 증가시키면서 산소 지수와 발열량을 통해 난연 성능의 변화를 분석하였다. 산소지수는 ISO 4589-2 상온 산소지수 방법을, 발열량 평가는 ISO 5660-1 콘 칼로리미터를 활용하였다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.488-494
• /
• 2011

Gasket plays an important role on sealing of the polymer electrolyte membrane fuel cell (PEMFC) stack. Stack requires gaskets in each cell to keep the hydrogen and air/oxygen within their respective regions. The failure of the gasket creates the problems of fuel leakage, mixing, damage on parts and can be a direct reason for the degrading the efficiency of fuel cell. The purpose of this paper researches on how mechanical properties of EPDM gasket in PEMFC are changed after long-term operations. The EPDM (ethylenepropylene-diene monomer) gaskets are obtained from the stack after long-term operations. DMA (dynamic mechanical analysis) is conducted to access the change of mechanical properties of the EPDM gasket. SEM/EDS (scanning electron microscope/energy dispersive spectroscopy) was used to show the surface topography and chemical characterization on the sample surface.

• Elastomers and Composites
• /
• 제45권3호
• /
• pp.212-216
• /
• 2010

리튬 이온 전지의 가스켓 재료로 사용되기 위해서는 내전해액성, 전기절연성, 낮은 압축 영구 줄음률, 비오염성, 내열성이 요구된다. Perfluoroalkoxy (PFA)보다 압축 영구 줄음률이 우수한 고무의 적합성을 평가하기 위하여 Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene(NBR), Fluoro Elastomers(FKM), Methyl-Vinyl Silicone Rubber (VMQ), Fluorosilicone(FVMQ)을 이용하여 최적상태의 compound를 제작하고 특성을 살펴보았다. 시험편을 $80^{\circ}C$의 propylene carbonate액에 침적하여 경도 및 체적변화를 1,000시간까지 시간별로 측정하였다. EPDM과 VMQ가 내전해액성이 우수하였으며, 전기절연성에서도 체적저항 기준 $10^{10}{\Omega}cm$이상의 결과를 얻을 수 있었다. 따라서, EPDM과 VMQ가 적절한 것으로 판단되었다.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.216-222
• /
• 2012

본 연구에서는 p-hydroxybenzoic acid(HBA)와 acryloyl chloride(AC)의 반응에 의해 방향족 카르복실기를 가지는 아크릴 단량체 p-acryloyloxybenzoic acid(ABA)를 합성하였으며, 합성된 ABA 단량체와 benzoyl peroxide(BPO) 개시제를 이용하여 톨루엔 용매 하에서 에틸렌-프로필렌-디엔 고무(EPDM)에 그라프트 공중합 시켰다. 합성된 단량체 ABA와 그라프트 공중합체 EPDM-g-ABA의 구조는 FT-IR, $^1H$-NMR 및 $^{13}C$-NMR 분광기로 분석하였으며, 개시제 함량과 단량체의 농도가 증가할수록 그라프트율이 높아지는 것을 확인하였다. 그라프트율이 증가할수록 인장강도와 영구압축줄음율과 같은 기계적 특성은 향상되었다. 또한 유리전이온도($T_g$와 초기 열분해 온도는 약간씩 상승하였다.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.194-200
• /
• 2017

After the grafting of methacrylic acid (MA) to ethylene propylene diene monomer (EPDM), a new peak at $1704cm^{-1}$ corresponding to the carboxylic acid group was observed in the infrared (IR) spectrum. This characteristic MA molecule peak grew larger as the MA contents were increased. After casting films were prepared from pure EPDM and MA-grafted EPDM, differential scanning calorimeter (DSC) measurements were made the pure EPDM exhibited a melting point of approximately $45^{\circ}C$ while that of the MA-grafted EPDM was $135{\sim}140^{\circ}C$. As the graft ratio of MA increased, the absorbed heat capacity increased at temperatures near $135{\sim}140^{\circ}C$, indicating that an increased amount of MA reacted. Furthermore, owing to the addition of crystalline MA, it is expected that strength of the elastomer will improve as the graft ratio increases, as a result of the increased number of hard segments.