• 한국자원식물학회지
• /
• 제33권5호
• /
• pp.476-481
• /
• 2020

한반도 미기록식물인 얼치기대가래(Potamogeton × anguillanus Koidz.)를 강원도 영월군 남면 연당리 연당천에서 발견하였다. 얼치기대가래는 대가래(P. wrightii Morong)와 넓은잎말(P. perfoliatus L.)의 자연교잡종이다. 대가래에 비해 잎자루가 짧고, 넓은잎말에 비해 잎이 좁고 길며, 밑부분이 줄기를 완전히 감싸지 않는 특징으로 구별된다. 본 미기록식물의 국명은 교잡종임을 고려하여 얼치기대가래로 신칭하였다. 주요 형질에 대한 기재와 화상자료 및 검색표를 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1117-1120
• /
• 2001

Chemical mechanical planarization(CMP) has emerged as the planarization technique of choice in both front-end and back-end integrated circuit manufacturing. Conventional CMP process utilize a polyurethane polishing pad and liquid chemical slurry containing abrasive particles. There have been serious problems in CMP in terms of repeatability and defects in patterned wafers. Since IBM's official announcement on Copper Dual Damascene(Cu2D) technology, the semiconductor world has been engaged in a Cu2D race. Today, even after~3years of extensive R&D work, the End-of-Line(EOL) yields are still too low to allow the transition of technology to manufacturing. One of the reasons behind this is the myriad of defects associated with Cu technology. Especially, dishing and erosion defects increase the resistance because they decrease the interconnection section area, and ultimately reduce the lifetime of the semiconductor. Methods to reduce dishing & erosion have recently been interface hardness of the pad, optimization of the pattern structure as dummy patterns. Dishing & erosion are initially generated an uneven pressure distribution in the materials. These defects are accelerated by free abrasive and chemical etching. Therefore, it is known that dishing & erosion can be reduced by minimizing the abrasive concentration. Minimizing the abrasive concentration by using Ce$O_2$ is the best solution for reducing dishing & erosion and for removal rate. This paper introduce dishing & erosion generating mechanism and a method for developing a semi-rigid abrasive pad to minimize dishing & erosion during CMP.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2005년도 제22차 정기총회 및 학술발표회
• /
• pp.62-63
• /
• 2005

오골계는 중요한 유전자원으로 보존할 가치가 있어 천연기념물로 보호를 받고 있다. 이 품종의 유전적인 조성을 살펴보기 위하여 mitochondrial DNA (mtDNA) 염기서열을 이용하여 계통분석을 실시하였다. 본 연구에 이용된 30마리의 오골계는 4개의 haplotype으로 분리가 되었으며 가장 많은 haplotype에는 11개의 개체가 속해 있었다. 계통 유전학적 분석 결과를 볼 때, 닭은 3개의 그룹으로 나누어지며 오골계는 3개의 그룹 모두에서 관찰됨을 알 수 있었다. 이 결과는 오골계의 보존 및 육종계획을 수립하는데 중요하게 이용될 것으로 사료된다.

• 대한한의학회지
• /
• 제15권2호
• /
• pp.373-396
• /
• 1994

The studies look at the causes, pathology, symptom, diagnosis, treatment of rheumatoid arthritis in the sight of east-western medicine. Following are the results : 1. Rheumatoid arthritis korean-medically belongs to symptom such as Bi(痺), Poung Bi(風痺), Tong Poung(痛風), Youk Jeol Poung(歷節風), Bak Hoe Poung(白虎風), Bak Hoe Youk Jeol Poung(白虎歷節風), etc. 2. The causes of Rheumatoid arthritis are endopathic and exopathic : endopathically it tis related to Chil Jeong(七情) and visceral imbalance, and exopathically it is related to Euk Eum (六淫) and environmental factors. 3. To figure out rheumatoid arthritis, we need to diagnose first the joint symptom and the general body condition, we need about 6 weeks to get the exact decision after the serologic test, the immune and inheritance test, the synovium test. 4. There are four kinds of treatments for rheumatoid arthritis : medicin, acupucture and moxibustion, suction cup and purging away the blood, physical therapy. Cheong Eol So Bi(淸熱消痺) can be used for the acute stage and Jang Bu Seong Shai(臟腑盛衰) is to be considered for the chronic stage. 5. Rheumatoid arthritis should be constantly treated to prevent the patient from the deformity of joint complication.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.136.1-136.1
• /
• 2011

This paper proposes the method to implement the railroad switching point heating system using the hybrid of the photovoltaic and wind power. The goal of the implementation of the railroad switching point heating system is to prevent freezing of the snow in the winter. The heating system of railway used to supply electricity through photovoltaic and wind power to prevent freezing. Hot wires of the railroad switching point heating system are used about 2kW of electric energy at the day. The electric energy of 2kW used the length of the hot wires about 3m. As the ON and/or OFF mode considering the tracks temperature and the ambient temperature, so the way the use of power-saving effect. In addition, the system can be used the railroad switching point heating system in winter and railway signal and street lights around the track in summer. In experiment, we acquired the power data according to time at the day of photovoltaic and wind power. We confirmed the temperature rise using the heating cable for 3m of $85^{\circ}C$, 30W/m. The temperature rise of the heating cable changes the temperature of $5^{\circ}C$ after 10 minutes and $11^{\circ}C$ after 10 minutes. We have confirmed the possibility of the railroad switching point heating system using the hybrid of the photovoltaic and wind power.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.694-699
• /
• 2009

교류 전기철도 급전시스템의 전압, 전류의 왜곡 및 전압 sag과 무효전력을 보상하기 위한 단상 UPQC의 동기좌표계를 이용한 제어 방법을 제안한다. 단상 UPQC의 동기좌표계를 이용한 제어를 통해 단상인버터 형태인 UPQC의 직렬보상기와 병렬보상기를 순시적으로 제어한다. 시뮬레이션을 통해 단상 UPQC를 이용하여 비선형 단상 부하인 차량으로 인해 급전시스템에 생길 수 있는 전압, 전류의 왜곡 및 전압 sag과 무효전력의 보상이 가능함을 증명하고, 단상 UPQC의 동기좌표계를 이용한 제어 방법이 타당함을 확인한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.7-11
• /
• 2008

형광등은 방전등의 일종으로 방전현상을 이용하여 전기에너지를 빛으로 변환하는 광원으로 램프의 점등 시에 나타나는 부저항 특성 때문에 반드시 점등회로를 필요로 한다. 방전등의 광원특성과 안정기의 변환특성은 밀접한 관련을 가지고 있다. 따라서 양 특성의 정합성립을 위하여 사용조건 및 경제성을 고려한 최적회로 설계지침을 내놓는 것은 매우 중요하다. 본 논문에서는 형광등용 전자안정기에 있어 부하인 형광램프의 수명말기에 나타나는 화재, 광효율 저감 등 여러 가지 문제점을 개선할 수 있는 수명말기 검측과 수명말기 표시기능 개발에 대하여 고찰해본다.

• Industrial Engineering and Management Systems
• /
• 제15권4호
• /
• pp.364-373
• /
• 2016

Disassembly is one of the important activities in treating with the product at the End of Life time (EOL). Disassembly is defined as a systematic technique in dividing the products into its constituent elements, segments, sub-assemblies, and other groups. We concern with a Fuzzy Disassembly Line Balancing Problem (FDLBP) with multiple objectives in this article that it needs to allocation of disassembly tasks to the ordered group of disassembly Work Stations. Tasks-processing times are fuzzy numbers with triangular membership functions. Four objectives are acquired that include: (1) Minimization of number of disassembly work stations; (2) Minimization of sum of idle time periods from all work stations by ensuring from similar idle time at any work-station; (3) Maximization of preference in removal the hazardous parts at the shortest possible time; and (4) Maximization of preference in removal the high-demand parts before low-demand parts. This suggested model was initially solved by GAMS software and then using Genetic Algorithm (GA) in MATLAB software. This model has been utilized to balance automotive engine disassembly line in fuzzy environment. The fuzzy results derived from two software programs have been compared by ranking technique using mean and fuzzy dispersion with each other. The result of this comparison shows that genetic algorithm and solving it by MATLAB may be assumed as an efficient solution and effective algorithm to solve FDLBP in terms of quality of solution and determination of optimal sequence.

• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2008

상태 공간 평균화법을 이용하여 절연형 inverse-SEPIC(Isolated Inverse-SEPIC)의 동적 모델링을 정립하고, 그 제어특성을 해석한다. 정상 상태 해석을 통해 회로의 주요 소자들에 대한 설계식을 유도한다. 근 궤적과 주파수 해석을 통해 II-SEPIC의 동특성 및 제어 특성을 파악하여, 적절한 제어성능을 가지는 제어기를 설계한다. 본 논문에서 제시하는 방법에 따라 설계된 II-SEPIC의 회로파라미터 및 전압제어기를 포함한 전체 제어시스템의 시뮬레이션과 실험을 수행한다. 시뮬레이션과 실험결과는 논문에서 제시한 모델링 및 제어기 설계방법의 타당성 및 유용성을 확인시켜 주고 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.519-520
• /
• 2007

In order to develop non-heated STAl(super thermal resistant Aluminum alloy) for ampacity gain conductor, the systematic research was carried out. Especially, the effect of a very small amount of Zr element in EC grade Al ingot on mechanical and electrical properties was our priority. As a result, it was found that the strength and recrystallization temperature of designed alloy was gradually increased with Zr addition up to 0.3wt.%. However, the electric conductivity showed no drastic change. The tensile strength and recrystalliztion temperature, $17.75\;kgf/mm^2$ and $420^{\circ}C$, was obtained at 0.3 wt.% Zr addition, respectively.