• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1593-1596
• /
• 1997

Because the leg mechanism of walking roblt affect on the mobility and energy efficiency, we focus on the design of new leg mechanism based on the previous leg mechanisms. We mention the deficiency of the previous leg mechanisms and propose a new leg mechanism that consists of a 2-d.o.f pantograph mechanism and a vertical linear actuator. The pantograph mechanism is attached to the horizontal plane of the body and the verical linear actuator is vertical to that plane. In order to design a quadruped walking robot, we consider the kinematics of the 2-d.o.f pantograph mechanism and the arrangement of twol linear motion guides that drive the pantograph mechanism.

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.885-890
• /
• 2015

Walking on split-belt treadmill has been applied to study walking disabilities, such as osteoarthritis (OA), to show asymmetric walking characteristics. In this study, we compared asymmetric walking in OA patients with healthy subjects under split-belt conditions and examined the reproduction of walking asymmetry in OA. Seven OA patients were instructed to walk at four frequencies, while four healthy subjects walked on a treadmill with tied-belt and split-belt conditions. To compare walking asymmetries, kinetic and kinematic measurements were made using force-plates and motion capture cameras, and subsequently center of mass (CoM) velocity, mechanical work and potential energy were calculated. Horizontal velocity change during split-belt walking of healthy subjects was similar to OA patients. Difference of mechanical work during single support phase occurred due to fall of CoM in fast belt. OA walking asymmetry could be reproduced by reducing differences of belt speeds to prevent rapid fall of CoM.

• 한국운동역학회지
• /
• 제16권2호
• /
• pp.85-95
• /
• 2006

The purpose of this study of which 10 University students in their twenties are the objects was to examine the causal differences of kinematic and electromyography during power walking and normal gait. We came to the following conclusions. 1) It took less time to stance phase, swing phase and whole gait time during power walking compared with normal gait. 2) During power walking, the step length and step length and lower limb length are longer than that of normal gait. 3) During power walking, ankle joint angle became more plantar flexed at LIC and RTO, knee joint angle become more flexed, so did hip joint angle at LIC and RTO. Besides during power walking the shoulder joint angle movement was bigger and elbow joint angle was more flexed as the trait of power walking. 4) During power walking, through out the phase the muscle activity of all muscle was higher expecially the muscle activity of Biceps brachii, gastrocnemius medialis, gastrocnemius lateralis, Soleus was higher. Therefore during power walking, one's scope of activity and muscle activity is relatively higher than those of normal gait, so power walking helps one strengthen muscular power and energy metabolism. This will be useful information for those who are interested in diet and well-being.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.1007-1013
• /
• 1989

This paper describes the procedure of kinmatic design of a quadruped walking machine which has better mobility and higher energy efficiency than the wheeled or tracked vehicles on the rough terrain. Specifically, this paper puts much emphasis on the procedure and its rationality of the design of the leg which is the key mechanical element of the walking robot. And it shows the appropriateness of the selected mechanism and the design method through the walking experiment of the prototype machine built upon the resulted design. The pantograph mechanisms are proved to be acceptable as the leg of the walking machine from the experiment even though it is indicated that the walking speed and the body deflection should be improved further. This paper also describes the problems of the realization of the gait the frictional effects along with their causes in the walking experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.14-14
• /
• 2003

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.612-620
• /
• 2006

This paper proposes an optimal trajectory generation method for biped robots for walking up-and-down stairs using a Real-Coded Genetic Algorithm (RCGA). The RCGA is most effective in minimizing the total consumption energy of a multi-dof biped robot. Each joint angle trajectory is defined as a 4-th order polynomial of which the coefficients are chromosomes or design variables to approximate the walking gait. Constraints are divided into equalities and inequalities. First, equality constraints consist of initial conditions and repeatability conditions with respect to each joint angle and angular velocity at the start and end of a stride period. Next, inequality constraints include collision prevention conditions of a swing leg, singular prevention conditions, and stability conditions. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot model that consists of seven links in the sagittal plane. The optimal trajectory is more efficient than that generated by the Modified Gravity-Compensated Inverted Pendulum Mode (MGCIPM). And various trajectories generated by the proposed GA method are analyzed from the viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.478-487
• /
• 2022

Objective: This study was conducted to analyze the effect of wearable complex muscle support system on energy efficiency during walking in elderly. Design: Cross sectional study Methods: Twenty healthy elderly participated in this study. All subjects performed a 6 minuteswalk test(6MWT) and stair climbing test in dual, slack and no suit conditions. In each condition, oxygen consumption(VO₂), metabolic equivalents(METs), energy expenditure measures(EEm), physiological cost index(PCI), walking velocity and heartrate were measured. Through repeated measured ANOVA, it was investigated whether there was a statistically significant difference in the measurement results between the three conditions. Results: In over-ground walking, VO₂, METs and EEm showed significant differences between no suit and slack conditions(p<0.05). In stair climbing, VO₂ showed significant difference between slack and dual conditions(p<0.05). Also, METs and EEm showed significant differences between no suit and slack, and between slack and dual conditions(p<0.05). Conclusions: Wearing the wearable complex muscle support system for elderly does not have much benefit in energy metabolism efficiency in over-ground, but there is a benefit in stair walking.

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.245-254
• /
• 2014

In this paper, stable and robust dynamic walking for a biped motion is proposed. To success this objective, the following structures are processed. In this paper, the proposed control method is one that adjusts actual zero moment position to move to the closest possible point in the stable area instead of following desired zero moment position. This minimizes energy consumption with the smallest joint movements. The proposed control method makes mechanical energy that drives lower limb of the bipedal robot efficient. In this paper, walking experiment is carried out with the three control structures mentioned above. The trajectory generated by off-line is illustrated by performing to walking on flat ground. experiment with an obstacle whose height is lower than that of trajectory is executed to validate dynamic motion.

• 한국컴퓨터그래픽스학회논문지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2023

본 논문은 강화학습을 통해 이족보행에 대한 모션 캡처를 통해 참조 모션의 데이터들을 기반으로 근골격 캐릭터의 시뮬레이션을 적은 비용으로 높은 품질의 결과를 얻을 방법을 소개한다. 우리는 참조 모션 데이터를 캐릭터 모델이 수행할 수 있게끔 재설정을 한 후, 강화학습을 통해 해당 모션을 학습하도록 훈련시킨다. 참조 모션 모방과 근육에 대한 최소한의 메타볼릭 에너지를 결합하여 원하는 방향으로 근골격 모델이 이족보행을 수행하게끔 학습한다. 이러한 방법으로 근골격 모델은 기존의 수동으로 설계된 컨트롤러보다 적은 비용으로 학습할 수 있으며 높은 품질의 이족보행을 수행할 수 있게 된다.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.300-307
• /
• 2019

This study develops a user centered outdoor jacket capable of energy harvesting based on consumer needs. Jackets are designed for typical outdoor activities such as hiking, trekking, and climbing, integrated with an energy harvesting module that can generate electric power from arm swing in outdoor and daily life walking. Textile based energy generators developed by the previous research of Lee & Roh (2018) were used. A prototype was created based on the arm swing motion experiment for location options and energy harvesting system functions, the simulation by the design sketch, and evaluation of the wearing test by experts. In-depth interviews were later conducted for the prototype with 10 outdoor experts to derive the optimal location of an energy harvesting system in three ways, and the prototype was revised to 5 styles that reflected reviews by experts on function and appearance. Research indicated that the energy harvesting jacket design signifies a user-centered design based on expert interviews and usability evaluation as well as previous research on energy generation and storage device. The jacket is convenient because it combines an energy generator in an optimal position to maximize energy generation with a storage and charging device that can be inserted into various position options for accessibility.