• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.526-529
• /
• 2008

By combining tetraphenylethylene and anthracene, we synthesized 9,10-bis(4-(1,2,2-triphenylvinyl)phenyl) anthracene [BTPPA] and 1,2-di(4'-tert-butylphenyl)-1,2-bis(4'-(anthracene-9-yl)phenyl)ethene [BPBAPE]; both BTPPA and BPBAPE have similar band-gaps, however their PL spectra were shifted by about 30 nm with respect to each other. The fabricated multilayered non-doped OLED devices based on pure BTPPA or BPBAPE exhibited luminance efficiencies of 3.93 cd/A at 6.8 V and 10.33 cd/A at 8.1 V, respectively, at $10\;mA/cm^2$. As the BPBAPE content of the emitting layer increased, the luminance efficiency of the device increased; in addition, the CIE coordinates of the fabricated devices shifted gradually from deep-blue for pure BTPPA to sky-blue for pure BPBAPE.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.294-300
• /
• 2010

In this study, we fabricated a polymer light emitting diode (PLED) and investigated its electrical and optical characteristics in order to examine the effects of the PFO [poly(9,9-dioctylfluorene-2-7-diyl) end capped with N,N-bis(4-methylphenyl)-4-aniline] concentrations in the emission layer (EML). The PFO polymer was dissolved in toluene ranging from 0.2 to 1.2 wt%, and then spin-coated. To verify the influence of the TPBI [2,2',2"-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole)]electron transport layer, TPBI small molecules were deposited by thermal evaporation. The current density, luminance, wavelength and current efficiency characteristics of the prepared PLED devices with and without TPBI layer at various PFO concentrations were measured and compared. The luminance and current efficiency of the PLED devices without TPBI layer were increased, from 117 to $553\;cd/m^2$ and from 0.015 to 0.110 cd/A, as the PFO concentration increased from 0.2 to 1.0 wt%. For the PLED devices with TPBI layer, the luminance and current efficiency were $1724\;cd/m^2$ and 0.501 cd/A at 1.0 wt% PFO concentration. The CIE color coordinators of the PLED device with TPBI layer at 1.0 wt% PFO concentration showed a more pure blue color compared with the one without TPBI, and the CIE values varied from (x, y) = (0.21, 0.23) to (x, y) = (0.16, 0.11).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1654-1657
• /
• 2007

We demonstrate that the reduction of quantum efficiency with increasing current density in phosphorescent light emitting diodes (PhOLEDs) is related to the formation of excitons in hole transporting layer based on the analysis of emission spectra and exciton formation zone. By employing dual emitting layerm we could achieve maintaining quantum efficiency at high current density up to $10000\;cd/m^2$ as 13.1% compared to the devices with single emitting layer (S-EML) (${\eta}_{ext}$= 6.9% at $10000\;cd/m^2$).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.83-88
• /
• 2004

BAlq was fabricated as for hole blocking layer in the OLED devices to investigate its electrical and optical characteristics. Device structure was ITO/$\alpha$ -NPD/EML/BAlq/Alq3/Al:Li using TYG-201, DPVBi (4, 4 - Bis (2, 2 - diphenylethen-1 - yls) - Biphenyl), Alq and DCJTB (4-(dicyanomethylene)-2- (1-propyls)6-methy 4H-pyrans) as green emitting material, blue emitting material, host material for red emission and red emitting guest material respectively. The OLED device showed optimum working voltage and electron density at 600 cd/$m^2$ when thickness of BAlq is 25$\AA$ for RGB OLED devices while their efficiencies are better at 50$\AA$ of BAlq. Red and blue color OLEDs also fabricated using 30$\AA$ thickness of BAlq and compared with those without BAlq layer. BAlq was more effective in electrical properties such as working voltage, current density and efficiency of red OLED than blue and green ones. This study describes that 30$\AA$ is optimum thickness of BAlq for best performance of full color OLED devices when using BAlq as a hole blocking material.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.581-586
• /
• 2015

We studied optical and electrical properties of two-wavelength white tandem organic light-emitting diodes using red and blue materials. White fluorescent OLEDs were fabricated using Alq3 : Rubrene (3 vol.% 5 nm) / SH-1 : BD-2 (3 vol.% 25 nm) as emitting layer (EML). White single fluorescent OLED showed maximum current efficiency of 9.7 cd/A, and tandem fluorescent OLED showed 18.2 cd/A. Commission Internationale de l'Eclairage (CIE) coordinates of single and tandem fluorescent OLEDs was (0.385, 0.435), (0.442, 0.473) at $1,000cd/m^2$, respectively. White hybrid OLEDs were fabricated using SH-1 : BD-2 (3 vol.% 10 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 20 nm) as EML. White single hybrid OLED showed maximum current efficiency of 7.8 cd/A, and tandem hybrid OLED showed 26.4 cd/A. Maximum current efficiency of tandem hybrid OLED was more twice as high as single OLED. CIE coordinates of single hybrid OLED was (0.315, 0.333), and tandem hybrid OLED was (0.448, 0.363) at $1,000cd/m^2$. CIE coordinates in white tandem OLEDs compared to those for single OLEDs observed red shift. This work reveals that stacked white OLED showed current efficiency improvement and red shifted emission than single OLED.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.956-960
• /
• 2009

The characteristics of organic films can be affected by the temperature of evaporation source because the temperature of evaporation source has an effect on substrate temperature during OLED fabrication process using the thermal evaporation. To investigate the characteristics of OLED devices fabricated by using thermally damaged organic films, I-V-L and half life-time in OLED devices fabricated with various substrate temperatures were measured. During emission layer(EML) evaporation, OLED devices with a structure of ITO(100 nm)/ELM200(50 nm)/NPB(30 nm)/$Alq_3$(55 nm)/LiF(0.7 nm)/Al(100 nm) were fabricated at various substrate temperatures(room temperature, $30^{\circ}C$, $40^{\circ}C$, and $50^{\circ}C$). The characteristics of current density and luminance versus applied voltage in OLED devices fabricated shows that many electrical currents flowed and high brightness appeared at low voltage, but that the lifetime of OLED devices dropped suddenly. This phenomenon explained that the crystallization of $Alq_3$ thin film appeared owing to the substrate heating during evaporation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.81-82
• /
• 2006

Doping is a well-known method for improving electroluminescent (EL) efficiency of organic light emitting diodes. In our study, doping with 2 materials simultaneously, we could achieve improved EL efficiency. The emission layer was tris-(8-hydroxyquinoline)aluminum, and the 2 dopants were N,N'-dimethyl-quinacridone (DMQA) and 10-(2-Benzothiazolyl)-2, 3, 6, 7-tetrahydro-1,1,7,7,-tetramethyl 1-1H, 5H, 11H-[1] benzopyrano [6,7,8-ij]quinolizin-11-one (C-545T). The EL intensity of co-doped device was nearly flat, it shows that co-doping technique could be a effective way to improve the EL efficiency. EL efficiency of Single-doped device based on DMQA and C-S45T were ~6.47Cd/A and ~7.45Cd/A, respectively. Co-doped device showed higher EL efficiency of ~8.30Cd/A.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.704-710
• /
• 2015

We studied white organic light-emitting diodes using blue fluorescent and red phosphorescent materials. White single OLEDs were fabricated using SH-1 : BD-2 (3 vol.%) and CBP : $Ir(mphmq)_2(acac)$ (2 vol.%) as emitting layer (EML). The white single OLED using SH-1 : BD-2 (3 vol.% 8 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 22 nm) as emitting layer showed maximum current efficiency of 8.8 cd/A, Commission Internationale de l'Eclairage (CIE) coordinates of (0.403, 0.351) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.402{\pm}0.012$, $0.35{\pm}0.002$) from 500 to $3,000cd/m^2$. The white tandem OLED using SH-1 : BD-2 (3 vol.% 12 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 18 nm) showed maximum efficiency of 19.6 cd/A, CIE coordinates of (0.354, 0.365) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.356{\pm}0.016$, $0.364{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of the white tandem OLED was more twice as high as the single OLED. Our findings suggest that tandem OLED was possible to produce improved efficiency and excellent color stability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1062-1065
• /
• 2004

The importance of display is becoming increasingly important due to the development of information and industry where it leads to diverse and abundant information in today's society. The demand and application range for FPD(Flat Panel Display), specifically represented by LCD(Liquid Crystal Display) and PDP(Plasma Display Panel), have been rapidly growing for its outstanding performance and convenience amongst many other forms of display. The current focus has been on OLED(Organic Light Emitting Diode) in the mobile form, which has just entered into mass production amid the different types of FPD. Many studies are being conducted in regards to device, vacuum evaporation, encapsulation, and drive circuits with the development of device as a matter of the utmost concern. This study develops a new type of light-emitting materials by synthesizing medical polymer organic chitosan and phosphor material CuS. Chitosan itself satisfies the Pool-Frenkel Effect, an I-V specific curve, with a thin film under $20{mu}m$, and demonstrates production possibility for a living body sensors solely with the thin film. Furthermore, it enables production possibility for EML of organic EL device(Emitting Layer) with liquid Green light emitting and Blue light emitting as a result of synthesis with phosphor material.