• 산업기술연구
• /
• 제34권
• /
• pp.71-78
• /
• 2014

Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1576_1576
• /
• 2009

We present the design of an EMI filter to mitigate the electrical noise from the power supply over a broadband of a few tens of KHz to 18GHz. Admitting that our approach is not apart from the standard technology of EMI filter, it is worth checking out how we can implement the filter that meets the challenging spec. on band of operation. The function of the EMI filter is well-depicted by its performance on the CE(Conducted Emission) and RE(Radiated Emission) suppression through tests which convince us of its application to power supplies of land, water and flying vehicles.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1200-1208
• /
• 2016

Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.303-306
• /
• 2002

The EMI filter used in switching apparatus is designed on the basis of personal designer experience. A try and error approach leads to a considerables waste of time without assurance to come out to a good solution. The difficulty in the right choice of the component values resides on the dominant role played by their parasitic components at high frequencies and is aggravated by the poor knowledge of the internal impedance of the noise generators. In this paper, we proposed the design technique for the EMI filter effectively using the LISN and the EMI analyzer in the industrial field.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.278-287
• /
• 2019

In this study, a zero-crossing spike current issue in a totem-pole bridgeless power factor correction (PFC) converter is comprehensively investigated for the first time. Spike current occurs when input voltage crosses zero, becomes a noise source, and causes severe common mode emission issues. A generation mechanism for electromagnetic interference (EMI) is presented to investigate the EMI problem caused by zero-crossing issue, and a noise spectrum due to this issue is predicted by a theoretical analysis based on the Fourier coefficient of an approximate spike current waveform. Furthermore, a noise reduction method is proposed and then improved to reduce the spike current. Experimental measurements are implemented on a GaN-based totem-pole bridgeless PFC converter, and the spike current can be effectively suppressed through the proposed method. Furthermore, the noise spectrums measured without and with the reduced zero-crossing spike current are compared. Experimental results validate the analysis of the noise spectrum caused by the zero-crossing spike current issue.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.966-982
• /
• 2014

본 논문에서는 고속 디지털 시스템에서 발생하는 잡음에 의해 RF 시스템의 특성이 열화되는 현상(RF interference: RFI)에 관한 시스템 레벨의 EMC 분석 기술과 주요 잡음원인 고속 디지털 시스템에서의 EMC 대책 기술을 소개하고 분석하였다. 현재 하나의 전자기기에서 시스템 간 발생하는 EMI/EMC 문제는 더욱 심각해지고 있으며, 특히 디지털 시스템의 EMI에 의한 RFI 문제는 주요 관심 문제로 인식되고 있다. 따라서 본 논문에서는 현재까지 연구되어진 부품 레벨부터 시스템 레벨까지의 RFI 연구에 대하여 소개하고 분석하였다. 그리고 이 문제를 해결하기 위해서 주요 잡음원 중의 하나인 고속 디지털 인터페이스에서 발생하는 공통모드 잡음의 발생 원인과 그에 대한 대책 연구에 관하여 분석하였다. 마지막으로, 앞으로 RFI 문제를 해결하기 위한 시스템 레벨의 EMC 분석 및 대책 연구방향을 제시하였다.

• 스마트미디어저널
• /
• 제4권1호
• /
• pp.33-38
• /
• 2015

분 논문에서는 전위계 센서를 이용한 비접촉식 동작인식거리를 확장하기 위해 1K Hz 이하의 극저주파 EMI를 제거하는 기법과 제스처 동작 시작점 추출을 위한 PLN(Power Line Noice)을 이용하는 기법을 제시한다. 스마트기기 상에 장착된 전위계차 센서 주변에서 발생하는 극저주파대역의 전기장의 세기를 측정하여 효율적인 센서의 배치를 통해 EMI를 제거하는 동시에 60Hz 대역의 PLN 잡음은 오히려 동작 시작점 검출을 위하여 이용하는 기법을 제안한다. 이 후, 접지를 통해 스마트 기기 및 센서의 회로에서 발생하는 전원선 잡음을 제거하고, 스마트 TV와 센서의 사이를 차폐시킴으로써 스마트 기기에서 발생하는 전기적 잡음을 제거한다. 마지막으로 필터기법을 이용하여 남아있는 미세 잡음을 제거한다. 전위계차 센서를 스마트기기의 비접촉식 원격제어에 활용하기 위한 극저주파대역 EMI의 효과적인 제거 기법 및 성능을 분석하였으며, 또한 전위계차 센서의 비접촉식 응용에 난제중 하나인 동작시작점 검출을 위한 효과적인 방법을 제시하여 제스처 인식거리를 실제 응용가능한 3m 이상으로 확장할 수 있음을 보였다.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.120-125
• /
• 2002

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. In the switching-mode power converter, the output voltage is generally controlled by varying the duty ratio of main switch. When a converter operates in steady state, duty ratio of the converter is kept constant. So the power of switching noise is concentrated in specific frequencies. Generally, to reduce the EMI and improve the immunity of converter system, the switching frequency of converter needs to be properly modulated during a rectified line period instead of being kept constant. Random Pulse Width Modulation (RPWM) is performed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300V/1kW with 5%~30% white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.154-158
• /
• 2006

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. Random Pulse Width Modulation (RPWM) is peformed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300v/1kW with $5%{\sim}30%$ white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• 대한전자공학회논문지TE
• /
• 제37권5호
• /
• pp.28-35
• /
• 2000

본 논문에서는 팩시밀리에서 발생하는 EMI(Electromagnetic Interference: 전자파 장해)를 제거하기 위하여 페라이트 코어를 사용한 환형 인덕터를 설계하였다. 팩시밀리에서 발생하는 EMI는 PSTN(Public Switching Telephone Network. 공중 유선 전화망)에 연결된 라인으로부터 복사되기 때문에 팩시밀리와 PSTN 사이에 Ni-Zn 계의 페라이트 코어를 삽입하여 복사 잡음을 제거하였다. 페라이트 코어를 두 개 이 상 사용하여 복사 잡음을 제거하는 것 보다. 경제적인 이득을 고려하여 페라이트 코어 한 개를 사용하고 턴 수를 조절하여 복사 잡음을 제거하는 것에 중점을 두었다 팩시밀리와 PSTN의 연결하는 라인에 설계된 인덕터를 삽입하여 EMI를 측정한 결과 인덕터의 턴 수가 4회일 때, 전자파 복사 방출기준치인 30dBμV/m 이 하로 감쇠되었다.