• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.97-105
• /
• 2020

Recently, as the data speed and operating frequencies of Ethernet keeps increasing, electro magnetic interference (EMI) also becomes increasing. The generation of such EMI will cause malfunction of near electronic devices. In this study, EMI filters were applied to reduce the EMI generated by DC-DC SMPS (switching mode power supply), which is the main cause of EMI generation of Ethernet switch. As the EMI filter, MLCCs with excellent withstanding voltage characteristics were used, which had advantages in miniaturization and mass production. Two types of EMI MLCC filters were used, which are X-capacitor and X, Y-capacitor. X-capacitor was composed of 2 MLCCs with 10 nF and 100 nF capacity and 1 Mylar capacitor. Y-capacitor was consisted of 6 MLCCs with a capacity of 27 nF. When only X-capacitor was applied as EMI filter, the conductive EMI field strength exceeded the allowable limit in frequency range of 150 kHz ~ 30 MHz. The radiative EMI also showed high EMI strength and very small allowable margin at the specific frequencies. When the X and Y-capacitors were applied, the conductive EMI was greatly reduced, and the radiation EMI was also found to have sufficient margin. In addition, X, Y-capacitors showed very high insulation resistance and withstanding resistance performances. In conclusion, EMI X, Y-capacitors using MLCCs reduced the EMI noise effectively and showed excellent electrical reliability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.335-341
• /
• 1991

We derive the radiation field equation at the naar field region to analyse EMI by the rectangular horn antenna. The EMI loadk current calculated from the load current induced on the transmission line being close to the rectangular horn antenna using the field theory and the transmission line theory. We find the conditions minimizing the EMI from the load current transfer function of distance, frequency and impedances at sending and receiving end. The smaller sending end impedance, the larger EMI load current and the larger sending impedance, the smaller EMI load current.

• Journal of Industrial Technology
• /
• v.34
• /
• pp.71-78
• /
• 2014

Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2004

This paper describes a design method of electromagnetic interference (EMI) filter for pulse-width modulation (PWM) inverter-fed AC drives used for home appliances such as washing machine and air conditioner. The generating and coupling mechanisms of the conducted EMI for AC drives are first investigated. The design procedure of the EMI filter based on the EMI separation principle is then presented. Experiments we carried out for the PWM inverter-fed induction motor drive system and it is shown that the results satisfy the EN55014 EMI regulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.63-71
• /
• 2017

During the sea trial test, we discovered EMI(Electromagnetic Interference) between MIL-SATCOM parabolic antenna and ES(Electronic Warfare Support) omni antenna. Emitted side lobe of CW(Continuous Wave) from MIL-SATCOM raises the threshold level of ES omni antenna. Therefore detection rate of ES is decreased. To solve this problem, the path of side lobe of CW from MIL-SATCOM should be blocked using EMI shield. This paper presents the method how to calculate the size of EMI shield, material, and optimized deployment. The test of the EMI shield effect was performed on a surface ship. After installing EMI shield, EMI has been decreased significantly. This paper will provide a method how to design EMI shield and a way to verify the result.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.272-275
• /
• 2017

Recently, semiconductor integration density enormously increases and its interconnection width is significantly narrowed, which leads to EMI (electromagnetic interference) problems on chip level. Chip manufacturer exploits TEM cell (transverse electromagnetic cell) to measure EMI on chip level, which requires PCB (printed circuit board) for measurement purpose. However, it is often neglected to consider that PCB patterns and other factors can affect on EMI measurement. In this paper, several test patterns are designed for different PCB design variables, and effects of PCB patterns on EMI measurement in TEM cell are analyzed. Based on these analyses, PCB design guidelines are also proposed to minimize the effects on EMI measurements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.6
• /
• pp.78-89
• /
• 2015

Conventional EMI filters have tried to use an active EMI filter as a series by the series connection of two EMI filters for CM and DM noise. However, the proposed filter is formed into one circuit by using the active EMI filter which is able to filter CM and DM noise components together. As a result, the active EMI filter showed the outstanding quality in mass and volume under 50% and electric characteristics have been compared to the passive EMI filter in approximately 150kHz~10MHz. Furthermore, the proposed circuit has simple circuit components by comparing with the series EMI filters, and electrical characteristics are similar. The noise have been attenuated to maximum 20dBuV.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.48-65
• /
• 1995

This paper deals with the analysis of the unintentional radiation from the TDX-1B subscriber Board. According to the demand of digital systems and developement of high speed switching devices, electro- magnetic noise intensity and it's bandwidth occupancy in spectrum are increasing and so there is a serious possibility causing the various EMI phenomena. More accurate radiation model was established by using the Finite Difference Time Domain (FDTD) analysis, and the EMI probabilistic analysis of the digital switching system was performed. For validating the proposed model and its calculated results, on-promises test was performed and compared with the calculated results. These results may be applicable to be used for EMI model in large digital system, and prediction of EMI effect from a large digital system, and the EMI control design when designing digital system to meet inter- national EMI regulation.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.146-147
• /
• 2012

가전제품에서 EMI 대책은 매우 중요한 부분 중의 하나이다. EMI 대책 중 적절한 EMI 필터를 설계하는 것은 매우 중요하다. 따라서 본 논문에서는 히터를 포함하는 세탁기에 있어서 히터의 위치에 따른 EMI 특성을 분석하고 이에 적합한 EMI 필터를 제안한다.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.155-156
• /
• 2019

표준영어에 대한 집착과 압박으로 EMI를 실행한 바 있는 우리나라 일부 공과대학에서의 EMI 강의에 대한 부작용으로 잠시 붐을 이루었던 공과대학에서의 EMI는 소강상태를 보이고 있다. 이에 영어가 모국어가 아닌 국가인 다른 국가의 공과대학에서의 EMI 강의 실태와 동향을 살펴보고, 효과적 EMI 정책을 우리나라에서 펼 수 있는 시사점을 본 연구에서 찾아보고자 한다.