• 한국전자파학회지:전자파기술
• /
• 제1권1호
• /
• pp.14-19
• /
• 1990

자기공진 이극안테나와 안테나 밸런을 제작하여 시험 장감쇠량 측정시스템을 구성하고, 건설된 한국표준연구소의 야외시험장의 시험장감쇠량을 측정하였다. 측정결과는 계산된 이론치와 $\pm$3dB 이내에서 일치되며, 따라서 한국표준연구소의 야외시험장은 전자파장해(EMI/EMC) 시험검사 및 안테나 교정에 사용할 수 있는 것으로 판단된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.368-371
• /
• 2004

ETRI has developed the EQM (Engineering Qualification model) payload system for the communications and broadcasting satellite (CBS) with Korean local companies. This paper describes a series of environmental tests such as vibration, thermal/thermal vacuum, and EMC tests. All the development processes including the design, implementation, integration and workmanship were verified and evaluated by these tests. The results of the functional tests and the compliance to the requirements are also presented. The technologies and heritage obtained from this development will be applied to the development of the payload system for the Korean communication satellite in the near future.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.142-150
• /
• 2001

Due to naturally formed copper oxides, the adhesion strength between copper and epoxy resin is often very poor. To improve the adhesion strength between copper and epoxy resin, Cu-based leadframe sheets were oxidized in a brown-oxide forming solution. Then the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) was studied using pull-out specimens. After the pull-out test, fracture surfaces were analyzed using SEM, AES and EDS to determine failure path. The results showed that the failure path lay over inside the CuO and inside the EMC irrespective of the pull strength.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.215-217
• /
• 2010

This paper describes the test results of radiated compatibility with Ariane 5 launcher performed on the COMS Satellite test facility. Firstly, the Radiated Emission test results are analyzed in compliance with the Radiated Susceptibility requirement specification of Ariane 5 launcher. The satellite nominal operation is monitored during injection a radiated electric field corresponding to the launcher emissions levels in critical frequency ranges. And also, E-field are measured through a probe located at external units level in order to assess the EMC safety margin in Radiated mode.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.329-334
• /
• 2017

This paper discusses the near field characteristics of a dipole source located near conducting metallic walls from an electromagnetic compatibility (EMC) point of view. An integral equation for a dipole source near a metallic wall is derived and solved by applying Galerkin's method of moments (MoM). The results show that in the regions outside the dipole source, total electric near fields decrease gradually in magnitude with an increasing field point from the dipole source. But in the regions inside the dipole source, total electric near fields decrease rapidly with a dipole position of $h{\leq}0.3{\lambda}$. For a dipole position of $h{\geq}0.7{\lambda}$, the peaks and nulls of the total near electric field occur periodically in the regions inside the dipole source, and the fluctuation period is almost $0.5{\lambda}$. The worst position for a receptor location is along the z-axis, and a range of a half-magnitude of the maximum near electric field in the principal H-plane is about two times broader than that of the principal E-plane. Experimental measurements are also presented to validate the theory.

• 비파괴검사학회지
• /
• 제37권2호
• /
• pp.106-114
• /
• 2017

This paper presents an automated subsurface micro void detection technique based on pulsed infrared thermography for inspecting epoxy molding compounds (EMC) used in electronic device packaging. Subsurface micro voids are first detected and visualized by extracting a lock-in amplitude image from raw thermal images. Binary imaging follows to achieve better visualization of subsurface micro voids. A median filter is then applied for removing sparse noise components. The performance of the proposed technique is tested using 36 EMC samples, which have subsurface (below $150{\mu}m{\sim}300{\mu}m$ from the inspection surface) micro voids ($150{\mu}m{\sim}300{\mu}m$ in diameter). The experimental results show that the subsurface micro voids can be successfully detected without causing any damage to the EMC samples, making it suitable for automated online inspection.

• 항공우주기술
• /
• 제6권1호
• /
• pp.173-181
• /
• 2007

단위 장비 수준에서 시스템 수준에 이르기까지 통제되는 KSLV-I 2단부의 복사성 방사/감응 특성은 탑재되는 위성, 발사체 1단부, 그리고 우주센터에 설치되고 운용되는 지상장비 및 외부 통신망의 정상동작을 보장하기 위하여 전 주파수 대역에 대해 시험 및 관리되어야 한다. KSLV-I과 하부시스템에서 방사되는 비의도성 잡음은 각각의 요구규격에 정의된 제한치 보다 작도록 제한되어야 할 뿐만 아니라 시스템의 특성을 정확히 검증하기 위한 적절한 시험 및 평가 방법도 개발되어야 한다. 본 논문에서는 KSLV-I 2단부 엔지니어링 모델의 전자파적합성 확보를 위해 도출된 복사성 방사와 복사성 감응에 대한 시험규격, 측정방법 그리고 시험 결과가 제시된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.175-179
• /
• 2009

본 논문에서는 전장용 아날로그 스위치 및 공조기 부하 유닛의 신뢰성 실험 중에서 EMC 스펙에 만족할 수 있도록 하는 필터 설계를 제안한다. EMC 규격에 만족하면서 전자부품들의 상호 간섭과 주변 환경의 영향을 최소화하고 제품의 품질 향상을 위해 전자파 필터를 적용하였다. 본 논문에서는 ISO/JASO 표준규격의 주파수범위인 30MHz ~ 1GHz 대역에서 스펙트럼 분석기와 간이 EMI 챔버를 이용한 시뮬레이션을 통해 특정 주파수 대역의 에너지 분포를 분석하였으며, 최적의 전자파 필터를 구현하기 위해 필터를 구성하는 소자의 용량을 결정하였다. 실제 필터 추가를 통해 노이즈가 감소한 것을 공인인증기관에서 증명하였으며, 전장용 아날로그 스위치 및 공조기 부하 유닛에 적용하여 전자파 간섭을 일으키지 않고 정상적인 동작을 수행하는 것을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.219-226
• /
• 2002

Desorption equilibrium moisture contents of oak mushroom were measured by the static method using salt solutions at flour temperature levels of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 6$\^{C}$ and five relative humidity levels in the range from 11.0% to 90.8%. EMC data were fitted to the modified Henderson, Chung-Pfost, modified Halsey and modified Oswin models using nonlinear regression analysis. Drying tests far oak mushroom were conducted in an experimental dryer equipped with air conditioning unit. The drying test were performed in triplicate at flour air temperatures of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 65$\^{C}$ and three relative humidities of 30%, 50% and 70% respectively. Measured moisture ratio data were fitted to the selected four drying models(Lewis, Page, simplified diffusion and Thompson models) using stepwise multiple regression analysis. The results of comparing root mean square errors for EMC models showed that modified Halsey was the best model, and modified Oswin models could be available far oak mushroom. The results of comparing coefficients of determination and root mean square errors of moisture ratio for four drying models showed that Page model were found to fit adequately to all drying test data with a coefficient of determination of 0.9990 and root mean square error of moisture ratio of 0.00739.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1068-1073
• /
• 2004

전원장치의 소형화 핵심기술인 반도체 스위칭 기술을 이용하여 5 V/500 mA급 트랜스리스형 파워모듈(transless type power module)을 설계하였다. 파워 모들은 강압형 chopper 방식을 이용하였으며, 스위칭회로, 제어회로, 전압검출회로, 그리고 정전압 회로 등으로 구성되어 었다. 본 연구에서 설계한 스위칭 파워모듈은 0.2 V의 load regulation, 0.1 V의 line regulation, 85 mVp-p의 output ripple 전압, 64.7 kHz의 스위칭 주파수, 최대 58% 정도의 효율을 나타내었으며, 신뢰성 및 EMC 평가항목을 만족하였다.