• 공업화학
• /
• 제26권5호
• /
• pp.543-548
• /
• 2015

리튬이온 전지용 음극소재의 용량 및 사이클 성능을 향상시키기 위해서 Si/C/CNF 합성물의 특성이 조사되었다. 제조과정으로는 SBA-15를 합성하고 볼밀링을 이용한 마그네슘환원을 통해 Si/MgO를 얻은 다음, Phenolic resin과 CNF를 이용해 탄화과정을 거쳐 최종적으로 산처리하여 Si/C/CNF 활물질을 합성하였다. 합성된 Si/C/CNF는 BET, XRD, FE-SEM 그리고 TGA를 이용하여 분석하였다. $50^{\circ}C{\sim}70^{\circ}C$까지 온도에 따라 SBA-15를 합성한 결과 $60^{\circ}C$에서 가장 큰 비표면적을 갖는 결과를 얻었다. 또한 LiPF6 (EC : DMC : EMC = 1 : 1 : 1 vol%) 전해질을 사용하여, 충방전, 사이클, CV와 임피던스 등과 같은 전기화학적 테스트를 수행하여 Si/C/CNF 전극의 이차전지 음극활물질로서 성능을 조사하였다. Si/C/CNF (Si : CNF = 97 : 3 중량비)를 이용한 전지의 용량은 1,947 mAh/g으로 다른 합성물보다 우수한 결과를 보였다. CNF 첨가량이 3 wt%에서 11 wt%로 증가함에 따라 용량 보존율이 84~77%로 안정성이 감소되었다. Si/C/CNF 합성소재 전극이 이차전지의 사이클 성능과 전기전도도를 개선할 수 있다는 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.107-115
• /
• 2017

본 연구에서는 국산 낙엽송 방부원주목을 대상으로 물리적 처리(인사이징, 배할, 열기건조)에 따른 표면할렬 방지효과와 장기 사용연한 확보 가능성을 실험적으로 검토하였다. 표면할렬이 목재 내 외부의 급격한 수분경사로 인해 발생하기 때문에 본 연구에서는 국내 최저 평형함수율 조건[온도($2^{\circ}C$), 습도(44.6%)]에서 시험편이 평형함수율(8.6%)에 도달할 때까지 실험을 진행하였다. 물리적 처리에 따른 표면할렬 방지효과를 검토한 결과, 무처리 시험편(Type C)의 경우, 모든 시험편에서 약제 침투 깊이보다 깊은 할렬이 발생하여 장기 내부후성을 확보할 수 없는 것으로 나타났다. 한편, 약제침투도 개선을 위해 사용하는 인사이징 처리만으로도 시험편의 80%에서 약제침투깊이보다 깊은 표면할렬을 방지하는 효과가 있었다. 그러나 국내에서 할렬을 방지하고자 사용하는 배할 처리는 인사이징 처리에 비하여 약제 침투깊이보다 깊은 표면할렬을 야기하였다.

• 전기화학회지
• /
• 제15권3호
• /
• pp.190-197
• /
• 2012

비닐에틸렌 카보네이트(VEC: vinyl ethylene carbonate)를 전해질 첨가제로 사용했을 때 하이브리드 커패시터(hybrid capacitors) 전극에서 나타나는 전기화학적 특성변화에 대해서 고찰하였다. 하이브리드 커패시터는 양극은 활성탄(AC : activated carbon) 음극은 리튬티타늄옥사이드(LTO: $Li_4Ti_5O_{12}$)를 사용하였고, 전해질로서는 에틸렌 카보네이트(EC: ethylene carbonate): 디메틸 카보네이트 (DMC: dimethyl carbonate) : 에틸메틸 카보네이트(EMC : ethyl methyl carbonate)를 사용하였고, 염으로 육불화인산리튬($LiPF_6$: lithium hexafluoro phosphate)을 사용하였다. 전극 표면의 산소관능기 그룹을 제거하고, 표면을 환원시킴으로써 전극에 안정성을 향상시킨다고 알려진 VEC의 첨가량에 따른 전기화학적 특성을 평가하였으며, 0.7%(부피비)의 VEC첨가시, 가장 우수한 전기화학적 특성을 얻을 수 있었다. 0.7% 이상 첨가하였을 경우, 오히려 부반응 증가로 전기화학적 성능이 감소하였다. X-ray photoelectron spectrocopy (XPS) 결과로부터 LTO 전극에서 VEC가 첨가되지 않은 전해질에 비해 LiF가 감소한 것을 확인 할 수 있었다. VEC가 첨가되지 않은 전해질은 2500 사이클 후, 43.2 %의 용량 유지를 나타냈지만, 최적화된 VEC 첨가를 통하여 82.7 %의 높은 용량을 유지하는 특성을 가진 하이브리드 커패시터를 얻을 수 있었다.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.52-63
• /
• 1986

This study was performed to find out drying characteristics and develop drying model for the design of an efficient dryer or drying system of red peper. The basic model which describes drying phenomenon of red pepper was firstly established, and drying tests were conducted at 14-different drying conditions. In this test, the effects of drying air temperature and relative humidity on the rate of drying were undertaken. Finally, a new drying model based on these experimental results was developed to describe the drying characteristics of red pepper. The results from this study may be summarized as follows. 1. Drying constant of the basic model established from Lewis' experimental model and diffusion equation was theoretically deduced as a function of moisture content and inner-temperature of red pepper. 2. From the results of drying tests, drying air temperature was found to have the greatest effect on the rate of drying. However, the effect of temperature was small for the condition of high relative humidity, and for low temperature, the effect of relative humidity was found to be large even though the range of relative humidity was low. 3. Modified Henderson equation was found to be better than Chung equation as the EMC model for the estimation of the equilibrium moisture content of red Pepper. 4. Constant-rate drying period did not exist in the red pepper drying test. And falling-rate drying period was divided into three distinct phases. Drying rate was dependent on the moisture content, the inner-temperature of red pepper and the change of physical property due to drying. 5. Drying constant increased with decrease of free moisture content, but it decreased at the end of the drying period. Also, drying constant was dependent on the drying air temperature and relative humidity. 6. The new drying model developed in this study was found to be most suitable in describing the drying characteristics of red pepper. Therefore, it may be concluded that drying time could be accurately estimated by the new drying model.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.266-271
• /
• 2014

The Electromagnetic Interference(EMI) generating from corona discharge of transformer area can interference the digital Instrument and Control(I&C) systems located nearby transformers. When the potential gradient of the electric field around the conductor is high enough to form a conductive region but not high enough to cause electrical breakdown to nearby objects, the EMI of corona discharge emits with the conducted and radiated noise and it interferences the signals of the I&C systems. Since digital I&C systems have an efficiency and competitive price, the analog I&C systems have been upgraded and displaced with the digital I&C systems but which have less EMI Immunity. There was no assessment to I&C systems by EMI generating corona discharge nearby transformers. When the safety-related I&C systems are installed in plants, the verification of equipment EMI should be done not in site-specific test but in test facilities. There are the need to do the site-specific EMI evaluation of corona discharge nearby transformers. This paper assesses the margin between plant emission limits and the highest composite plant emission of corona. When the non safety-related I&C systems are placed in transformer area, it suggests the appropriate radiated susceptibility level to EMI of corona discharge.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2007년도 GIS 공동춘계학술대회 논문집
• /
• pp.246-251
• /
• 2007

The purpose of this study is to develop a grid based model for calculating the critical nonpoint source (NPS) pollution load (BOD, TN, TP) in Nak-dong area in South Korea. In the last two decades, NPS pollution has become a topic for research that resulted in the development of numerous modeling techniques. Watershed researchers need to be able to emphasis on the characterization of water quality, including NPS pollution loads estimates. Geographic Information System (GIS) has been designed for the assessment of NPS pollution in a watershed. It uses different data such as DEM, precipitation, stream network, discharge, and land use data sets and utilizes a grid representation of a watershed for the approximation of average annual pollution loads and concentrations. The difficulty in traditional NPS modeling is the problem of identifying sources and quantifying the loads. This research is intended to investigate the correlation of NPS pollution concentrations with land uses in a watershed by calculating Expected Mean Concentrations (EMC). This work was accomplished using a grid based modelling technique that encompasses three stages. The first step includes estimating runoff grid by means of the precipitation grid and runoff coefficient. The second step is deriving the gird based model for calculating NPS pollution loads. The last step is validating the gird based model with traditional pollution loads calculation by applying statistical t-test method. The results on real data, illustrate the merits of the grid based modelling approach. Therefore, this model investigates a method of estimating and simulating point loads along with the spatially distributed NPS pollution loads. The pollutant concentration from local runoff is supposed to be directly related to land use in the region and is not considered to vary from event to event or within areas of similar land uses. By consideration of this point, it is anticipated that a single mean estimated pollutant concentration is assigned to all land uses rather than taking into account unique concentrations for different soil types, crops, and so on.

• 한국항행학회논문지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2020

본 연구에서는 항공기에 장착하여 S/C대역의 신호를 장거리 표적으로 방사하기 위한 장치를 개발하였다. 장치는 요구된 실효 등방성 복사전력을 충족시키기 위해 대역별 송신기와 광대역 안테나로 RF 인터페이스를 구성하였다. 장치의 외형은 항공기 연료탱크와 동일한 포드(pod) 형상으로 설계했고, 측정된 장치의 중량은 119.8 kg, 무게중심은 1391.35 mm 그리고 관성 모멘트는 46.07 ± 0.05(I_yy) kg·㎡과 45.36 ± 0.09(I_zz) kg·㎡로 모두 항공기 장착을 위한 요구도를 충족함을 확인하였다. 비행 안전을 확인하기 위해 전자기 간섭 시험(RE102, CE102), 환경시험(고온/저온 운용, 고도), 체계 내 전자기 적합성 시험 그리고 인체 전자기 복사 위해도 시험을 수행하였으며, 모든 항목의 시험 결과가 요구사항을 충족함을 확인하였다. 장치는 요구되는 전기적/기계적으로 요구되는 사항을 모두 충족함으로써 항공기 장착이 가능함을 확인하였다.

• 한국융합학회논문지
• /
• 제9권2호
• /
• pp.1-6
• /
• 2018

본 연구에서는 전기 자동차용 DC/DC converter 회로의 전도성/복사성 방사 분석 결과를 제시하고 있다. 일반적으로 사용되는 MPQ4433 칩을 이용한 전력 변환회로의 EMI 특성을 개선하기 위해 주파수 확산 회로를 적용하였다. TLV3201칩을 사용한 주파수 확산 회로가 설계되어 전력변환 회로에 적용되었다. EMI 시뮬레이션을 통해 최적의 PCB 제작되었으며, 제작된 회로를 이용하여 원거리 방사, 근거리 전도 및 복사 방출에 대한 시뮬레이션과 측정 결과가 제시되었다. 전도 및 방사 방출은 CISPR 25의 표준화 된 시험 절차에 따라 측정되었으며 주파수 확산이 적용된 경우에 EMI 특성이 약 20% 개선되는 결과를 얻었다. 본 연구에서 제안 된 주파수 확산을 이용한 EMI 저감 기술은 자동차용 전력 컨버터 모듈의 설계에 처음 적용되었으며 향후 EMI 개선에 효과적으로 사용될 수 있을 것으로 예상된다.

• Journal of Chest Surgery
• /
• 제18권4호
• /
• pp.872-880
• /
• 1985

Myasthenia gravis is a neuromuscular transmission disorder characterized by fatigue and weakness of voluntary muscles. Although the pathogenesis is known as reduction of available acetylcholine receptors at neuromuscular junctions by autoimmune attack, the thymic role in myasthenia gravis is still unclear and under investigation. But thymectomy in the management of myasthenia gravis has become increasingly important since the first successful operation with remission of symptoms in 1939 by Blalock. From January 1983 to June 1985, authors performed 17 thymectomies for patients with myasthenia gravis. Among them, 12 patients were free from thymoma [Croup A] and 5 were coupled with thymoma [Group B]. The results were as follows: 1] Sex distribution was 11 females and 6 males. Mean age of the patients was 32.2 year old. Sex and age distribution by the Group A and B are shown Table 1. 2] Clinical manifestations of ocular symptoms were seen in 5 patients [88.2%], extremity weakness in 13 patients, bulbar weakness in 12 patients and dyspnea in 6 patients. According to the Osserman`s classification, 5 patients were in group IIA, 6 in IIB and 6 in IIC. 3] Pre-operatively, all patients were positive response to the anti-cholinesterase test and 12 patients [92.3%] revealed positive findings in electromyography [EMC] which was done in 13 patients. 4] The postoperative complications were respiratory distress in 3 patients, myasthenic crisis in 2 patients and wound disruption in one patients. 5] Pathologic examination of the thymus showed hyperplasia in 10 patients [90%] and thymoma in 5 patients, of which 4 were mixed type with invasion to the adjacent tissues and one lymphocytic type without invasion. Normal thymus was noticed in only 2 patients. 6] In postoperative evaluations, among the 12 patients c free from thymoma [Group A], complete remission of symptoms was noticed in 3 patients and improvement in 7 patients. But among the 5 patients coupled with thymoma [Group B], only one patients showed improvement [Table 8]. Therefore, remission and clinical improvement were noticed in 11 patients [64.7%] of the all and complete remission was noticed in 3 patients [17.6%].

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.