• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.455-463
• /
• 2023

Objectives: The aim of this study was to develop an air sampling and analytical method for estimating worker exposure to linear carbonate solvents and to evaluate the method. Methods: The target substances were three linear carbonates: DMC, DEC, EMC. GC/FID was used for sample analysis. Laboratory experiments were conducted to determine desorption solvents and sample capacity, and to evaluate storage stability, accuracy, and precision. Results: Coconut Shell Charcoal (CSC, 100/50 mg) was used as the air sampling media, and a desorption solvent of 5% methanol/95% dichloromethane was selected. Recommended sampling capacities were 1~11 ℓ for DMC, 1~18 ℓ for DEC, and 1~24 ℓ for EMC. The stability of three linear carbonates was demonstrated over 30 days in a refrigerator (4℃). Detection limits were determined as follows: DMC 0.26 ㎍/sample, DEC 0.24 ㎍/sample, and EMC 0.25 ㎍/sample. The total coefficient of variation was calculated as DMC 0.064, DEC 0.079, and EMC 0.07. Conclusions: This sampling and analysis method is suitable for estimating personal exposure to linear carbonates in the workplace.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.7-12
• /
• 2000

Copper-based leadframe sheets were oxidized in a black-oxide forming solution, and molded with epoxy molding compound (EMC) to form sandwiched double-cantilever beam (SDCB) specimens. The adhesion strength of leadframe/EMC interface was measured in terms of fracture toughness by using SDCB specimens and the fracture surfaces were analyzed by various equipments such as glancing-angle XRD, AFM, and SEM. Results showed that three types of failure paths, which were closely related to the surface condition of leadframes before molding.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.53-56
• /
• 1996

우리나라는 1990년 9월 전자파장해 검정규칙을 제정하여 본격적인 전자파장해 규제를 실시 하여 왔으나 WTO 체제의 출범, OECD 가입 및 GATT 조인 등의 국제화 및 개방화 물결에 따라 EMC 기술 기준 및 시허방법 역시 국제적 수준으로의 변경이 불가피하게 되어 1996년 10월 이를 개정하게 되었다. 이에 본고에서는 개정 전, 후의 EMC 기술기준 및 시험방법을 비교해 보고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.221-225
• /
• 1994

We described the impact ionization rates of electron in GaAs/AlGaAs MQH(multi- quantum well) using EMC(ensenble Monte Carlo) simulation. Hot electron energy of injected into quantum well is increasing nearly liearly due to the applied electric field to the barrier of MQM inspite of various Al mole fraction in AlGaAs or barrier width. Impact ionization rates are decreasing exponentially by increasing Al mole fraction, and they have peak vague due to the barrier width.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.119-120
• /
• 2015

태양광 산업의 발전에 따라 계통연계형 태양광인버터의 EMC 관련 문제에 대해 CISPR 11 Ed. 6.0에서 태양광인버터의 DC포트에 대한 전도성 장해 허용기준을 추가로 제정하였고, 30MHz 이하 전도대역에서 20kVA이하, 75kVA이하 및 75kVA 초과하는 용량의 산업용 및 가정용에 대한 기준을 소개한다.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.4
• /
• pp.13-25
• /
• 1991

Recently, according to the development of electromagnetic wave technique, more frequent and powerfull wave radiation becomes inevitable and so electromagnetic environments has become worse accordingly. Electromagnetic wave absorber is known the most effective preventive remedy to cope with the EMI/EMC problem. To realize broad-band electromagnetic wave absorber, triple layered structure where an air layer is interposed between a sintered ferrite layer and a ruber ferrite layer was adopted. Computer simulation for optimum design and evaluation of absorption characteristics has been made. The results shows that designed broad-band electromagnetic wave absorber can be useful for EMI/EMC problem, especially reducing TV ghosts in both VHF and UHF bands by additionally an air layer and a thin rubber ferrite layer on the surface of conventional ferrite, without replacing it.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.269
• /
• pp.66-72
• /
• 1999

전력$\cdot$교통$\cdot$산업$\cdot$정보$\cdot$가전의 각 분야에서 파워일렉트로닉스를 지탱하는 소자로서 파워디바이스가 하는 역할은 매우 크다. 특히 최근에는 지구온난화대책으로서 $CO_2$의 배출규제와 화석에너지 고갈에 대한 대응이 요구되고 있다. 이를 해결하기 위해 각종 전기기기 분야에서는 파워일렉트로닉스를 활용한 산업용 모터의 제어와 에어컨$\cdot$냉장고 등의 자에너지, 그리고 환경보호를 위한 전기자동차의 보급, 태양광발전과 풍력발전 등의 신에너지의 개발이 활발해지고 있다. 이와 같이 파워일렉트로닉스의 발전은 사회에 커다란 혜택을 가져다주었으나 동시에 전원의 고조파와 EMC(Electro-Magnetic Compatoboloty)문제를 초래하고 있다. 고조파 문제에 대해서는 액티브필터용 IPM(Intelligent Power Module)등의 등자으로, 기기측에서 적극저긍로 대책을 강구하고 있으나, 한편 EMC의 대응은 고조파대책에 비하여 다소 어려움이 이TDj 업계 전체적으로는 이제야 대응이 시작된 단계이다. 최근 파워디바이스의 주류가 된 IBT(Insulted Gate Bipolar Transister)는 고속성과 저포화전압이 인정되었으나 IGBT가 갖고 이쓴 고속 Switching 특성 때문에 EMC대응이 문제가 되고 있다. 따라서 IGBT자신의 특성개선은 물론 환류다이오드의 회복전류의 소프트화, 패키지의 개량, IGBT의 신구동방식의 개발 등, 파워디바이스 전체적으로 EMC에의 대응이 시작되었다.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.599-604
• /
• 2009

For the search of unified law of moisture movement in wood, moisture distribution of Korean red pine at non-steady state was investigated. We assume that the equilibrium moisture content (EMC) in wood depends on only temperature and relative humidity, it can be control in temperature and humidity chamber. If temperature is constant and humidity or vapor pressure is changed with sin curve shape at adequate cycles, EMC in chamber can be changed as well with sin-curve shape. The setup condition of a non-steady state in humidity control chambers is a constant temperature at $20^{\circ}C$ and 15+10 sin ${\omega}t$ percent EMC. It can be found that the distribution of moisture in the specimen with varying relative humidity are illustrated various types. Moisture in wood is complicated and vibrates with the moisture sorption process. Considering a unified law of moisture movement in wood, it is considered that the most important fact is to search the method of precise diffusion & transfer coefficients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.649-656
• /
• 2013

A conventional epoxy-microsilica composite (EMC) and an epoxy-microsilica-nanosilicate composite (EMNC) were prepared in order to apply them to mold-type transformers, current transformers (CT) and potential transformers (PT). Nanosilicate was exfoliated in a epoxy resin using our electric field dispersion process and AC insulation breakdown strength at $30{\sim}150^{\circ}C$, glass transition temperature and viscoelasticity were studied. AC insulation breakdown strength of EMNC was higher than that of EMC and that value of EMNC was far higher at high temperature. Glass transition temperature and viscoelasticity property of EMNC was higher than those of EMC at high temperature. These results was due to the even dispersion of nanosilicates among the nanosilicas, which could be observed using transmission electron microscopy (TEM). That is, the nanosilicates interrupt the electron transfer and restrict the mobility of the epoxy chains.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.47-54
• /
• 1991

본 논문에서는 전자파 해석에 관련된 기존의 해석 기법들을 간략하게 비교, 검토하고 GTD / UTD를 기본으로하여 고주파 해석 기법에 관련된 몇가지 문제들을 다룬다. 전자파 해석이란 전자파의 복사(radiation), 산란(scattering) 및 결합(coupling)에 관련된 문제의 해석을의미 한다. 전자파 해석은 여러 목적을위해 응용되고 있으며 EMC / EMI문제의 분석 및 대책 수립에도 응용될 수 있다. EMC / EMI 문제의 근원은 전자파의 간섭(interference) 현상이다. Emitting source로부터 복사(radiation)되는 간섭파는 여러 경로를 통해서 receptor로 coupling된다. 일반적으로 emitter와 receptor사이에는 여러 복잡한 구조물이 산란체로 작용하고 있으므로, emitter와 receptor사이의 직접경로(direct path)를 통한 coupling과 함께 구조물에 의한 전자파의 반사 및 회절을 통한 간접경로(indirect path)의 coupling도 고려되어야 한다. 따라서 EMC / EMI문제는 자유공간(free space)상에 있는 antenna 사이의 송수신 문제보다 매우 복잡하고 정확한 couplin의 계 산에 적지않은 어려움이 있다. EMC / EMI대책수립은 일차적으로 coupling path의 차단을 통해서 가능하므로 전자 파의 coupling path의 분석과 전자파의 복사 및 산란 mechanism에 대한 해석이 필수적이다.