• Geophysics and Geophysical Exploration
• /
• v.4 no.3
• /
• pp.70-79
• /
• 2001

The integral equation method is a powerful tool for numerical electromagnetic modeling. But the difficulty of this technique is the size of the linear equations, which demands excessive memory and calculation time to invert. This limitation of the integral equation method becomes critical in inverse problem. The conventional Born approximation, where the electric field in the anomalous body is approximated by the background field, is very rapid and easy to compute. However, the technique is inaccurate when the conductivity contrast between the body and the background medium is large. Quasi-linear, quasi-analytical and extended Born approximations are novel approaches to 3-D EM modeling based on the linearization of the integral equations for scattered EM field. These approximation methods are much less time consuming than full integral equation method and more accurate than conventional Born approximation. They we, however, still approximate methods for 3-D EM modeling. Iterative series methods such as modified Born, quasi-linear and quasi-analytical can be used to increase the accuracy of various approximation methods. Comparisons of numerical performance against a full integral equation and various approximation codes show that the iterative series methods are very accurate and almost always converge. Furthermore, they are very fast and easy to implement on a computer. In this study, extended Born series method is developed and it shows more accurate result than that of other series methods. Therefore, Iterative series methods, including extended Born series, open principally new possibilities for fast and accurate 3-D EM modeling and inversion.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.427-440
• /
• 2006

Electromagnetic(EM) survey has been in use for over a half century as a standard routine for, mineral exploration in many parts of the world. But EM survey work and serious research effort were initiated in Korea only as late as in early 1980s, largely inspired by four pioneers who did their graduate studies in the U.S.A. in 1970s. Nevertheless domestic achievements in the field of EM survey are remarkable in the last two decades: the field operations and related interpretational skills appear to have reached a global standard, even compared with the most advanced in other countries, virtually in a whole spectrum of the method which includes magneto-tellurics(MT), Controlled Source Audio-frequency Magneto-tellurics(CSAMT), geomagnetic sounding, small loop survey systems, Very Low Frequency(VLF), Ground Penetrating Radar(GPR), time domain surveys, and noise analysis. Besides mineral exploration, EM survey has been applied in Korea to hydrogeology, geotechnical engineering, non-destructive investigation of structures, unexplored ordnance(UXO) investigation, environmental monitoring, and archaeological investigation as well. Now that original contributions of several Korean geophysicists are found even in new frontiers such as high-frequency EM survey, investigation in time-domain EM field for buried metal objects and structures, and also modem data inversion scheme, it is duly hoped that they make some technical breakthrough to unravel still entangled knots of EM survey method in a forseeable future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.37-47
• /
• 1999

Among the geophysical exploration methods, electromagnetic (EM) survey must have the broadest range of instrumental systems and remarkable range of applications. There is a plethora of available techniques and instruments, and the depth of investigation and resolution are highly dependent on the particular systems used according to their operating frequency and source-receiver configuration. This diversity of EM systems, however, provides a wide range of instruments or methodologies to choose in order to select the most appropriate tool for the task in hand. This rather than being a disadvantage, would be a major strength of EM methods. Modern EM equipments are remarkably portable, considering their sophistication. Coupled with major advances in recent computer technology, accurate modeling and interpretation techniques are on the way of continuous development and upgrade which, in turn, make the EM methods to become much more heavily used, especially for engineering and environmental applications. We aim to provide a brief theoretical principles, survey techniques and case histories of some selected EM methods that can be applied to geotechnical and environmental problems in Korea.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2023

This study entailed an investigation of a tensile stress measurement method for prestressed concrete (PSC) tendons by utilizing external magnetization. The target of this study are PS structures that have been constructed and in use. An optimal external magnetization based elasto-magnetic (EM) sensor was designed using finite element analysis considering various factors, such as coil arrangement and size, that could influence the PS tendons inside the PSC girder. The residual tensile stress resulting from the external magnetization of the girder was then determined. Further, theoretical verification was performed using the numerical and material data used in the finite element analysis for sensor design. The calculated values of strength of magnetization at the target location were matched with the finite element analysis results. Thus, the designed sensor and the feasibility of magnetizing the tendons inside the PSC I-girder using an EM sensor were validated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.635-643
• /
• 2007

In this paper, a decision-directed expectation maximization (DEM) algorithm is proposed to improve the performance of channel estimation in OFDM-based cellular systems. The DEM algorithm enables a mobile station (MS) with multiple antennas, located at the cell boundary, to increase the performance of channel estimation using transmit data, without decreasing spectral efficiency. Also, DEM algorithm can apply fast fading without loss of channel estimation performance because that includes channel variation factor in a group. It is verified by computer simulation that the DEM algorithm can reduce computational complexity significantly while improving the performance of channel estimation in fast fading channels, compared with the expectation maximization (EM) algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1331-1337
• /
• 2010

In this paper, measurement techniques of absorbing ability for a RAM were studied for RCS Reduction needed for materializing ADD's RF stealth. As for the measurement techniques of absorbing ability, the theories of the free space method, similar to real radar system, and transmission line method, suitable for lab scale, were established. And we made real RAM samples, measured absorbing ability according to each, and compared the results. After comparison, electromagnetic(EM) wave absorbing ability was measured to be somewhat superior in free space method and overall uniform pattern was observed. Therefore, by applying measurement techniques by stage and by frequency we could develop RAM in a more efficient way.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.170-173
• /
• 2002

본 논문에서는 여러 분야에서 널리 응용되고 있는 적응 뉴로-퍼지 시스템(ANFIS)에서의 효과적인 퍼지 규칙 생성방법을 제안한다. ANFIS의 성능 개선을 위해 구조동정을 수행함에 있어서 전제부 파라미터는 EM(Expectation-Maximization) 알고리즘을 적용하였으며, 파라미터학습은 Jang에 의한 하이브리드 방법을 적용한다. 여기서 초기의 중심과 분산을 구하기 위해 FCM(Fuzzy c-means) 클러스터링 기법을 사용하였다. 이렇게 함으로서 적은 규칙 수를 가지면서도 효율적인 퍼지 규칙을 얻을 수 있도록 하였다. 이들 방법의 유용함을 보이고자 Box-Jenkins의 가스로 데이터에 적용하여 제안된 방법이 이전의 연구보다 좋은 결과를 보임을 보이고자 한다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1218-1224
• /
• 2008

Located on the upstream of a gene, the promoter region that plays a very important role in the control of gene expression as a signal part has various binding sites for transcription factors. These binding sites are present in various parts of the promoter region and assume an aspect of highly conserved consensus sequence pattern. This paper deals with the introductions of search methods for consensus pattern, including Wataru method, EM algorithm, MEME algorithm, Genetic algorithm and Phylogenetic Footprinting method, and intends to give future prospects of research on this field.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.157-160
• /
• 2021

프레임 단위 LiDAR (Light Detection And Ranging) 기반의 포인트 클라우드는 프레임 간 상관 관계가 높기 때문에 프레임 사이의 예측 기법을 사용하여 더 높은 압축 효율을 얻을 수 있으며, 이를 위해 MPEG의 G-PCC는 Inter-EM (Inter-Exploratory Model)의 표준화를 진행하고 있다. 특히, Inter-EM은 LiDAR 기반 포인트 클라우드의 이러한 특성을 효율적으로 압축하기 위해 전역 및 지역 움직임을 모두 고려하여 압축하는 구조로 설계되었다. 이 중 전역 움직임은 LiDAR 센서가 장착된 차량의 움직임으로 인해 발생되므로, 포인트 클라우드 내 모든 물체들이 동일한 움직임을 나타낼 것으로 예상된다. 하지만, LiDAR 기반 포인트 클라우드는 포인트 클라우드 내 점들의 특성에 따라서 전역 움직임이 나타나는 양상이 다르다. 본 논문은 이러한 LiDAR 기반 포인트 클라우드의 특성을 설명하고, LiDAR 기반 포인트 클라우드 압축 시 전역 움직임 압축을 위한 포인트 클라우드 분할 방안에 대해 제안한다. 본 논문에서 제안하는 포인트 클라우드 분할 방안을 활용한 전역 움직임 압축 시 기존 Inter-EM 대비 더 효율적인 압축이 가능하다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.449-458
• /
• 2007

In this paper, we reconstructed the cross-sectional images of two phantoms simulating a petrochemical process from gamma radiation measurements. Three different weight functions for EM image reconstruction algorithm were built and compared with histograms representing the variance of the homogeneity of the phantom material, The radiation source, $^{137}Cs$, collimated by a lead with 5 mm diameter aperture and the measurement was made with a lead shielded 1inch NaI detector. As a result, the method taking into account the beam area in each pixel for a weight function showed the best resolution among the three methods.