• Korean Journal of Acupuncture
• /
• v.29 no.4
• /
• pp.616-622
• /
• 2012

Objectives : The objective of this study was to evaluate the correlation between earlobe crease(ELC) and Hypertension(HTN) in the auricular point diagnosis. Methods : 140 patients who were admitted the Jeongeup City Geriatric Hospital were examined for the presence or absence of ELC and HTN. The one examined the ELC of patients and the other examined the presence of hypertension. The presence of right ELC, left ELC, right or left ELC, and right and left ELC were respectively compared with the presence of HTN. Chi-square test was used to analyze the correlation between ELC and HTN. Results : The presence of right ELC was significantly related to presence of HTN(p=0.001). The sensitivity, specificity, and positive and negative predictability of ELC for diagnosis of HTN were 0.755, 0.524, 0.787, and 0.478. The presence of left ELC was significantly related to presence of HTN(p=0.002). The sensitivity, specificity, and positive and negative predictability of ELC for diagnosis of HTN were 0.745, 0.524, 0.785, and 0.468. The presence of right or left ELC was significantly related to presence of HTN(p<0.001). The sensitivity, specificity, and positive and negative predictability of ELC for diagnosis of HTN were 0.806, 0.500, 0.790, and 0.525. The presence of right and left ELCs was significantly related to presence of HTN (p=0.007). The sensitivity, specificity, and positive and negative predictability of ELC for diagnosis of HTN were 0.694, 0.548, 0.782, and 0.434. Conclusions : These results show that the presence of ELC is significantly associated with hypertension.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.516-521
• /
• 2022

In this paper, a compact 4-bit chipless RFID(radio frequency identification) tag using a modified ELC(electric field-coupled inductive-capacitive) resonator and multiple slot resonators is proposed. The modified ELC resonator uses an interdigital-capacitor structure in the conventional ELC resonator to lower the resonance peak frequency of the RCS. The multiple slot resonators are designed by etching three slots with different lengths into an inverted U-shaped conductor. The resonant peak frequency of the RCS for the modified ELC resonator is 3.216 GHz, whereas those of the multiple slot resonators are set at 4.122 GHz, 4.64 GHz, and 5.304 GHz, respectively. The proposed compact four-bit tag is fabricated on an RF-301 substrate with dimensions of 50 mm×20 mm and a thickness of 0.8 mm. Experiment results show that the resonant peak frequencies of the fabricated four-bit chipless RFID tag are 3.285 GHz, 4.09 GHz, 4.63 GHz, and 5.31 GHz, respectively, which is similar to the simulation results with errors in the range between 0.78% and 2.16%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.1
• /
• pp.26-32
• /
• 2012

This paper presents a metamaterial absorber unit sell structure with four-element electric-LC resonators (ELC). In order to enhance the operating bandwidth of the proposed absorber unit cell two pairs of ELC resonators with a different size are used. The proposed unit cell shows negative permittivity and permeability when the electric field is parallel to the capacitive gap and the magnetic field is normal to the plane of ELC resonator. The simulated results show peak absorbance over 90% at two frequencies of 8.53 and 9.08 GHz, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.457-461
• /
• 2013

In this paper, a novel method based on geometrical optics is proposed to calculate the optical characteristics of an electric field driven liquid crystal (ELC) lens. For an optimally designed ELC lens, effective refractive index is calculated and then ray tracing is carried out using Huygens' principle. From the results, the intensity distribution at the optimum viewing distance (OVD) is obtained. To confirm the validity of our work, the result is compared with that calculated by the extended Jones matrix method (EJMM). As a result, it turns out that the novel method provides more simple and rigorous simulation results than the EJMM.

• Current Optics and Photonics
• /
• v.4 no.2
• /
• pp.115-120
• /
• 2020

A novel method is proposed for controlling the distance of an image plane in Fourier holograms using varifocal electric-field-driven liquid-crystal (ELC) lenses. Phase Fresnel lenses are employed to reduce the thickness and response time of the ELC lenses. The voltages applied to the electrodes of the ELC Fresnel lens are adjusted so that the lens has the same retardation distribution as an ideal lens. The focal length can be controlled by changing the retardation distribution with the applied voltages. Simulations were conducted for the image reconstruction of Fourier holograms with various focal lengths of the ELC Fresnel lenses. The simulation results indicate that the distance of the image plane can be properly controlled with the varifocal ELC Fresnel lens.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.302-305
• /
• 2009

This paper examines the effect of nitride formation on formability for Cu bearing high strength extra low carbon (ELC) steel sheets. For this purpose, we have investigated the effect of addition of aluminium (Al) and boron (B) on texture and precipitation behavior of the ELC steel during continuous annealing. Mechanical properties and microstructures of the ELC steel sheets were analyzed as well using uni-axial tensile test, electron back-scattered diffraction (EBSD) technique and transmission electron microscopy (TEM) following pilot rolling and continuous annealing. It has been found that the addition of Al and B increases the precipitation of AlN and BN. What is more, the scavange of solute nitrogen is effective in increasing the formability of the ELC steels. In addition, the Al and B addition improves the aging property of the ELC steel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.494-498
• /
• 2016

In this paper, we proposed the 3-dimenstional (3D) analysis for calculating the optical characteristics of an autostereoscopic display with electric field driven liquid crystal (ELC) lens. From 3D analysis considering the slanting of lens, we calculate the cross-talk of each images and the distortion of viewing zone. Using geometric opics and extended Jones matrix method (EJMM), phase retardation of ELC lens according to position is calcuated and then optical path difference in 3D space considering tilt and azimuth angle of incident light is gotten. Then, intensity distribution is presented in the space. Through camparing the intensity distribution using ideal lens with the ELC lens, we identify the noise and image distortion of ELC lens. As a result, this analysis is expected to provide optimum design conditions for realistic and rigorous 3D display with ELC lens.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.530-535
• /
• 2021

In this paper, the design method for a chipless RFID tag using ELC resonators is proposed. A four-bit chipless RFID tag is designed in a two by two array configuration using three ELC resonators with different resonant peak frequencies and one compact IDC resonator. The resonant peak frequency of the bistatic RCS for the IDC resonator is 3.125 GHz, whereas those of the three ELC resonators are adjusted to be at 4.225 GHz, 4.825 GHz, and 5.240 GHz, respectively, by using the gap between the capacitor-shaped strips in the ELC resonator. The spacing between the resonators is 1 mm. Proposed four-bit tag is fabricated on an RF-301 substrate with dimensions of 50 mm×20 mm and a thickness of 0.8 mm. It is observed from experiment results that the resonant peak frequencies of the fabricated four-bit chipless RFID tag are 3.290 GHz, 4.295 GHz, 4.835 GHz, and 5.230 GHz, respectively, which is similar to the simulation results with errors in the range between -2.3% and 0.2%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.67-67
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1781-1784
• /
• 2007

The increase of repetition rate, the dithering of laser optics, and the extension of pulse duration time are major approaches in improving the picture quality of AMOLEDs fabricated by excimer laser crystallization (ELC). Advanced solid phase crystallization (ASPC) has been developed to improve the uniformity and the process cost. Even though the mobility of ASPC-TFT is lower than that of ELC-TFT, it is high enough to drive AMOLED pixels.