• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.781-785
• /
• 2009

We have fabricated simple triple-layer blue-emitting phosphorescent organic light emitting diodes (OLEDs) using different thicknesses (25 and 55 nm) of 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) electron transport layers. 1,1-bis[4-bis (4-methylphenyl)- aminophenyllcyclohexane (TAPC), bis[(4,6-di-fluorophenyl)-pyridinate-$N,C^{2'}$]picolinate (FIrpic) and N,N' -dicarbazolyl-3,5-benzene (mCP) were used as hole transport, blue guest and host materials, respectively. The driving voltage, electroluminescence (EL) efficiency and emission characteristics of devices were investigated. The maximum EL efficiency was 20 cd/A in the device with 55 nm BCP layer, which efficiency was about 33% higher than the device with 25 nm BCP layer. The higher efficiency in the 55 nm BCP device resulted from the enhanced electron-hole balance. In the EL spectrum of blue phosphorescent OLED with BCP layer, the relative intensity between 470 and 500 nm peaks was related to the location of emission zone.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.429-434
• /
• 2002

In this paper, multiheterostructure white organic light-emitting device was fabricated by vacuum evaporation. The structure of white organic light-emitting device is ITO/CuPc/TPD/DPBi:DPA/$Alq_3/Alq_3$:DCJTB/BCT/$Alq_3$/Ca/Al. Three primary colors are implemented with DPVBi, Alq$_3$and DCJTB. The maximum EL wavelength of the fabricated white organic light-emitting device is 647nm. And the CIE coordinate is (0.33, 0.33) at 13 V. In the fabrication of white organic light-emitting devices with DCJTB, $Alq_3$, DPVBi, the EL spectrum has two peaks at 492nm, 647nm. Two peaks appeared because the blue light is combined with green light. The maximum wavelength of red light is not changed with applied voltage. After voltage applied, for the first time, the electrons met the holes in the red emission layer and emitted red light. And then the electrons moved to the green emission layer, and blue emission layer continuously. Finally, when all of the emission layer activated, the white light is emitted.

• 대기
• /
• 제25권3호
• /
• pp.559-568
• /
• 2015

As is evident from its definition, Southern Oscillation Index variability conformed to a combination of the variations of Darwin and Tahiti pressure. Over the El-$Ni{\tilde{n}}o$ Southern Oscillation spectra, the Darwin pressure shared variations associated with the SSN tendency while the Tahiti had a connection with the stratospheric quasi-biennial oscillation modulating annual cycle. The power peak near the 3.5-year period comprised the third harmonic of the sun and the second of the modulated annual cycle. The derived harmonics came from both sources, so the initiation of El-$Ni{\tilde{n}}o$ could be predicted more successfully when including the effects of the sun and QBO.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.56-58
• /
• 2000

We have synthesized the new blue electroluminescent material, Bis(3-N-ethylcarbazolyl)cyanoisophthalidene(BECCIP), and characterized its properties by UV/visible absorption, photoluminescent(PL) and electroluminecent(EL) spectrum. This material is well vacuum-deposited for thin film and has dear surfaced thin film property. The BECCIP shows blue PL and EL spectra at around at 485nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.798-802
• /
• 2009

New blue emitting materials of o,p-TP-EPY and m,m-TP-EPY were synthesized using two terphenyl units with different structures in the new core of indenopyrazine. EL spectrum of o,p-TP-EPY was more blue shifted than m,m-TP-EPY, and external quantum efficiency of o,p-TP-EPY was showed improvement of about 60% compared to efficiency of m,m-TP-EPY.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.286-290
• /
• 1999

Electroluminescence is occurred when phosphor is located in electric field. In this paper, we made powder electroluminescent device (PELD) with structured ITO film/Phosphor/Insulator/Silver paste. The transparent electrode was ITO film and green(2704-01), orange(2702-02) and blue-green(2703-01) were used as phosphor. The insulator was BaTiO$_3$ and $Y_2$O$_3$, back electrode was silver paste. To investigate electrical and optical properties of PELDs, EL spectrum, Brightness, Transferred charge density using Sawyer-Tower\`s circuit was measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1742-1744
• /
• 2000

Organic materials have been considered for the fabrication of practical electroluminescent(EL) devices because a large number of organic materials are known to have extremely high fluorescence quantum efficiencies in the visible spectrum. In this study, electroluminescent devices are constructed using novel organic materials PRL-401, PRL-403 as the emitting elements. The devices have a triple-layer structure of organic thin films, prepared by vacuum vapor deposition. Greenish yellow electroluminescent emission is observed. The maximum luminances are over 1000 $cd/m^2$ and the turn-on voltages are about 13 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.582-585
• /
• 1999

Electroluminescence is occurred when phosphor is located in electric field. In this paper, we made powder electroluminescent device (PELD) with structured ITO film/Phosphor/Insulator/Silver paste. The transparent electrode was ITO film and green(2704-01) and orange(2702-02) and blue-preen(2703-01) were used as phosphor. The insulator was BaTiO$_3$ and $Y_2$O$_3$, bark electrode was silver paste. To investigate electrical and optical properties of PELDs, EL spectrum, Brightness . Transferred charge density using Sawyer-Towers circuit was measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.174-176
• /
• 2000

We have synthesized the new blue electroluminescent material, Bis(3-N-ethylcarbazolyl)cyanoisophthalidene(BECCIP), and characterized its properties by UV/visible absorption, photoluminescent(PL) and electroluminecent(EL) spectrum. This material is well vacuum-deposited far thin film and has clear surfaced thin film property. The BECCIP shows blue PL and EL spectra at around at 485nm.

• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.477-487
• /
• 2019

Understanding the behavior of skew bridges under the action of earthquakes is quite challenging due to the combined transverse and longitudinal responses even under unidirectional hit. The main goal of this research is to assess the response of skew bridges when subjected to longitudinal and transversal earthquake loading. The effect of skew on the response considering two- and three- span bridges with skew angles varying from 0 to 60 degrees is illustrated. Various pier fixities (and hence stiffness) and cross-section shapes, as well as different abutment's bearing articulations, are also studied. Finite-element models are established for modal and seismic analyses. Around 900 models are analyzed under the action of the code design response spectrum. $Vis-{\grave{a}}-vis$ modal properties, the higher the skew angle, the less the fundamental period. In addition, it is found that bridges with skew angles less than 30 degrees can be treated as straight bridges for the purpose of calculating modal mass participation factors. Other monitored results are bearings' reactions at abutments, shear and torsion demand in piers, as well as deck longitudinal displacement. Unlike straight bridges, it has been typically noted that skew bridges experience non-negligible torsion and bi-directional pier base shears. In a complementary effort to assess the accuracy of the conducted response spectrum analysis, a series of time-history analyses are applied under seven actual earthquake records scaled to match the code design response spectrum and critical comparisons are performed.