• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.752-758
• /
• 1995

Red emitting CaS:Eu,S electroluminescent(EL) device prepared at 550.deg. C by an electron-beam evaporation technique, demonstrated luminance of 175cd/m$\^$2/ and efficiency of 0.311m/W with 3kHz drive. Luminance was increased with the increase of applied voltage and frequency. From the results of the PL spectrum and the EL spectrum, the CaS:Eu, S device showed emission peak near 640nm resulted from the transition of EU$\^$2+/ 4f$\^$6/5d.rarw.4f$\^$7/. The capacitance of the phosphor layer from the Sawyer-Tower circuit was 10.5nF/cm$\^$2/.

• Korean Journal of Mathematics
• /
• v.29 no.3
• /
• pp.511-518
• /
• 2021

In this paper, a relationship between the extended spectrum of the Aluthge transform and the extended spectrum of the operator T is proved. Other relationships between two different operators and other results are also given.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.60-63
• /
• 2000

In this paper, 7-segment was implemented using AC powder EL. ZnS:Cu and BaTiO3 was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectric layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display, driving circuit, software for driving. The properties of fabricated devices was measured with EL spectrum and brightness.

• Journal of information and communication convergence engineering
• /
• v.17 no.1
• /
• pp.21-40
• /
• 2019

This paper presents a comprehensive survey of various artificial intelligence (AI) techniques implemented in cognitive radio engine to improve cognition capability in cognitive radio networks (CRNs). AI enables systems to solve problems by emulating human biological processes such as learning, reasoning, decision making, self-adaptation, self-organization, and self-stability. The use of AI techniques is studied in applications related to the major tasks of cognitive radio including spectrum sensing, spectrum sharing, spectrum mobility, and decision making regarding dynamic spectrum access, resource allocation, parameter adaptation, and optimization problem. The aim is to provide a single source as a survey paper to help researchers better understand the various implementations of AI approaches to different cognitive radio designs, as well as to refer interested readers to the recent AI research works done in CRNs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.955-958
• /
• 2003

We report the photo-(PL) and electroluminescence (EL) properties of new conjugated compounds based on diphenyl benzeneamine moiety, 4,4'-(1,4-phenylenedi-(1E)-2,1-ethenediyl]bis(N,N-diphenyl-benzenamine](PEDB) and 4,4'-([1,1 -biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[N,N-diphenyl-benzenamine)(BPEDB), as emitting materials and dopant materials. The ITO/m-MTDATA/NPB/DPVBi + BPEDB(1%) /Alq3/LiF/Al device shows blue EL spectrum at 458nm and high efficiency(5.3 cd/A). PEDB as dopant shows also blue EL spectrum around ${\lambda}$ max=463nm and 4.1 cd/A high efficiency in ITO/m-MTDATA/NPB/DPVBi + PEDB(1%)/Alq3/LiF/Al device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1121-1124
• /
• 2003

We report the photo (PL) and electro luminescence (EL) properties of new conjugated compounds based on imidazole moiety, 4,4' -di(4,5 diphenyl-N-imidazolyl)stilbene(DDPIS) and 4,4'-di(2,4,5-triphenyl-N-imidazolyl)stilbene(DTPIS), as emitting materials. ITO/m-MTDATA/NPB/DDPIS/Alq3/LiF/AI device shows blue EL spectrum at 456 ㎚ and 0.3 cd/ A and turn on voltage at 7 ∼ 8 V. DTPIS shows blue EL spectrum at around λmax=453㎚ and 0.5 cd/A efficiency in ITO/m-MTDATA/NPB/DTPIS/Alq3/LiF/Al device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.131-134
• /
• 2000

Electroluminescent[EL] from conjugated polymers has recently received great attention because polymer light-emitting diodes[LEDs] clearly have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the electrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material In this paper, we fabricated the single layer EL device using poly(3-octylthiophene)[P3OT] as emitting material. The orange-red light was clearly visible in a dark room Maximum peak wavelength of EL spectrum saw at 640nm in accordance with photon energy 1.9eV. And we know that ionization energy of P3OT is 4.7eV from the cyclic voltammetry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.265-268
• /
• 1997

Electroluminescent(EL) devices are constructed using multilayer organic thin film. A cell structure of glass substrate/Indium-Tinoxide/TPD as a hole transporting layer/Alq3+Rhodamine 101 perchrolate(Red3) as an emitting layer/Alq3 as an electrron transporting layer/Al as an electrode was employed. Optimal thickness of emitting layer in EL cell was performed from the viewpoint of the electronics properties of emitting layers. The general vapor-deposition method was used to control the thickness of omitting layer in EL devices and electro-optical characteristics were measured. It is clarified that controlling thickness of emitting layer in vapor-deposition film had an effect on the change of carrier injection and EL spectrum. The intensity of red omission with luminance of 81cd/$m^2$ was achived at 11V driving voltage. The surface morphology of emitting layer in EL devices was investigated.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.349-353
• /
• 1999

In this paper, to fabricate the AC power electroluminescent device (PELD) with high brightness, new structure that constructed single emissive layer between electrodes was proposed. Dielectric and phosphor material structure that constructed single emissive layer between electrodes was proposed. Dielectric and phosphor material were BaTiO3 and ZnS:Cu respectively. Fabricated AC power EL devices were estimated by optical and electrical properties of EL spectrum, brightness, CIE coordinate system, transferred charge density and EL emission wave in time domain. With above results, we found that brightness of newly proposed AC powder EL power EL device was 2754 cd/m2 at 100V, 400 Hz and compared with conventional device structure.

• Journal of the Korean Vacuum Society
• /
• v.18 no.5
• /
• pp.365-371
• /
• 2009

We analyzed photoluminescence (PL) and electroluminescence characteristics of various chirped quantum dot structures. Peaks in EL curves were contributed by excited states of quantum dots (QD), while those in PL curves by grounded states. Based on these characteristics, we suggested that superluminescent diodes with wide spectral bandwidth may be developed if chirped QD structures are designed to make a contribution by ground states to EL characteristics.