• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.762-767
• /
• 2001

We report the white light emission from the multilayer organic electroluminescent(EL) device using exciplex emission. The exciplex at 500nm originated between poly(N-vinylcarvazole)(PVK) and 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT) and exciplex of 50nm originated from N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and BBOT were observed. Also, the energy transfer from PVK to BBOT and poly(3-hexylthiophene)(P3HT) in mixed emitting materials was occurred. The electroluminescence(EL) spectra of organic EL device which have a device structure of ITO/CuPc(5nm)/emitting layer(100nm)/BBOT(30nm)/LiF(1.4nm)/Al(200nm) were slightly changed as a function of the applied voltage. The luminance fo 12.3 ${\mu}$W/$\textrm{cm}^2$ was achieved at 20V and EL spectrum measured at 20V corresponds to Commission Internationale de L\`Eclairage(CIE) coordinates of x=0.29 and y=0.353.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.44-48
• /
• 2017

We explain optical and electrical properties of top and bottom-emission structured alternating-current powder electroluminescent devices (ACPELDs) with Ga-doped ZnO(GZO) transparent electrode. The top-emission ACPELDs were layered as the metal electrode/dielectric layer/emission layer/top transparent electrode and the bottom-emission ACPELDs were structured as the bottom transparent electrode/emission layer/dielectric layer/metal electrode. The yellow-emitting ZnS:Mn, Cu phosphor and the barium titanate dielectric layers were layered through the screen printing method. The GZO transparent electrode was deposited by the sputtering, its sheet resistivity is $275{\Omega}/{\Box}$. The transparency at the yellow EL peak was 98 % for GZO. Regardless of EL structures, EL spectra of ACPELDs were exponentially increased with increasing voltages and they were linearly increased with increasing frequencies. It suggests that the EL mechanism was attributed to the impact ionization by charges injected from the interface between emitting phosphor layer and the transparent electrode. The top-emission structure obtained higher EL intensity than the bottom-structure. In addition, charge densities for sinusoidal applied voltages were measured through Sawyer-Tower method.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.315-320
• /
• 1999

Novel electroluminescent materials, polymer material, PU-BCN and low molar mass material, D-BCN with the same chromophores were designed and synthesized. A molecular structure of chromophore was composed of bisstyrylbenzene derivative with cyano groups as electron injection and transport and phenylamine groups as hole injection and transport. Device structures with PU-BCN and D-BCN as an emission layer were fa-bricated, which were a single-layer device(SL), Indium-tin oxide(ITO)/emission layer/MgAg, and two kinds of double-layer devices which were composed of ITO/emission layer/oxadiazole derivative/MgAg as a DL-E device and ITO/triphenylamine derivative/emission layer/MgAg as a DL-H device. The two emission materials, PU-BCN and D-BCN with the same emission-chromophore were evaluated as having excellent performance of charge injection and transport and revealed almost the same emission characteristics in high current density. EL emission maximum peaks of two material were detected at about 640 nm wavelength of red emission region.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1344-1346
• /
• 2005

We report microcavity effect of top emission organic light-emitting diodes (OLEDs) by using Al cathode and anode, which are feasible for not only top emission EL and angle dependant effects but facile evaporation process without ion sputtering. The device in case of $Alq_3$ green emission showed largely shifted EL maximum wavelength as 650 nm maximum emission. It was also observed that detection angle causes different EL maximum wavelength and different CIE values in R, G, B color emission. As a result, the green device using $Alq_3$ emission showed 650 nm emission ($0^{\circ}$) to 576 nm emission ($90^{\circ}$) as detection angle changed. We believe that these phenomena can be also explained with microcavity effect which depends on the different length of light path caused by detection angle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1081-1081
• /
• 2002

Top emission organic EL devices were fabricated by using metal-doped cathode interface layer to achieve low drive voltages. Also, facing-targets-type sputtering was used to sputter indium-tin oxide layer on top of organic active layer. The devices fabricated in this study showed reasonably high external quantum efficiency of about 1 % which is comparable to that of bottom-emission-type devices.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.332-335
• /
• 1998

An alternating copolymer of PPV and PTV, poly[2-methoxy-5-(3,7-dimethyl)octyloxy-1,4-phenylenevinylene-alt-2,5-thienylenevinylene] (DAPPV-PTV) has been synthesized and light-emitting properties of the polymer have been studied. A single layer EL device using DAPPV-PTV as an emitting layer between ITO and Al electrodes (ITO/DAPPV-PTV/Al) has been fabricated, and light emission of the device becomes visible at 3 V. The EL emission maximum of the device is about 620 nm. Double layer EL device using DAPPV-PTV and Alq3 (ITO/DAPPV-PTV/Alq3/Al) has also been fabricated. The double layer EL device shows two-color emission depending on the applied voltage. The device emits a pale green color from 8 V, and then the color turns to red at about 18 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.57-60
• /
• 2002

In generally, the guest-emitter doped system has been reported to give a bright electroluminescence(EL). The purpose of using doped system is to improve for increasing lifetime and efficiency, and tuning multicolor light. This indicates an enhanced electron-hole recombination rate in emitting layer. The purpose of this study is to obtain the high performance EL devices for flat panel display with red emission. We fabricated EL devices using the guest-host system. where DCM derivatives were taken as a dopant. The devices are fabricated in multilayer system with various concentration of the dopant (red light emitting dye). We measured the I-V characteristics and EL spectra from these devices. and we compared with photoluminescence(PL) quantum yield among the DCM derivatives. The emission mechanism of devices is participated in energy transfer. The energy transfer from these hosts to DCM generates luminescence spectra that vary from yellow red to red, depending on DCM derivatives. Absorption and emission spectra of organic materials composing the devices depend on the emission materials doped with the DCM derivatives. We demonstrated that the high EL efficiency can be achieved by doping host material with DCM derivatives and molecular steric structures

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.316-323
• /
• 2003

Zinc complexes with bis[2-(o-hydroxyphenyl) naphtol [1,2] oxazolato ligands (ZnPBO-4) and its derivatives (ZnPBO-S) were synthesized, and luminescent properties of these materials were investigated. Both the fluorescent emission band and electroluminescent emission band were discussed based on their ligand structure differences. The emission band found that it strongly depends on the molecular structure of introduced ligand. It was tuned from 446 nm to 491 nm by changing the ligand structures. Spreading of the ${\pi}$-conjugation in 2-(o-hydroxyphenyl) group gives rise to a blue shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 3,100 $cd/m^2$ at 12V, current density, 575 $mA/m^2$ was obtained from the organic light-emitting diodes (OLEDs) using ZnPBO-4 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.392-393
• /
• 2007

In this paper, we report the characteristics inorganic EL device with high dielectric constant materials of PMN, PZT. Fabricated EL device shows stable light emission even at 20kHz -400Volt without any break down failure. Brightness voltage curve of EL device is same with typical EL. As increasing applied voltage, the brightness increased linearly. From the results of Frequency and duty ratio variation, over 50% of brightness increment was seen. Luminous efficiency was increased upto 200V range and saturated over 200V by slow increasement of light emission. We got e bright stable emission of 1733 cd/m2 at the condition of Frequency 35 KHz, Duty 10%, 400V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.163-168
• /
• 2009

Hyperbranched conjugated polymers (p-HPPV and m-HPPV) with para and meta linkages were synthesized from $A_2$ and $B_4$ type monomers through Wittig polycondensation. The synthesized p-HPPV and m-HPPV were completely soluble in common organic solvents such as chloroform, tetrahydrofuran, 1,2-dichloroethane, etc. and thermal gravimetric analyses showed that p-HPPV and m-HPPV are stable up to $350^{\circ}C$. The molecular weights (from GPC), UV-visible, and photoluminescence maximum peaks of p-HPPV and m-HPPV are characterized in detail. The fabricated EL devices using the synthesized hyperbranched polymers, (ITO/(p-HPPV or m-HPPV)/Al), showed EL emission at about 507 nm and 481 nm (681 nm), respectively. Especially, EL device from m-HPPV were found to exhibit nearly white emission with approximate CIE coordinates of (0.31, 0.34) compared with (0.310, 0.316) of NTSC white color at $100\;cd/m^2$. The good photophysical properties combine with good film-form ability could make these hyperbranched polymers to be a potential candidate for the EL materials.