• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.36.2-36.2
• /
• 2008

This paper presents the impact of Japanese radio source on the S-Band communication between KOMPSAT-2 satellite and TT&C ground system. Major specifications such as transmitting EIRP (Effective Isotropic Radiated Power) and location of Japanese terrestrial station were informed from Radio Research Laboratory in Korea Communication Commission. To estimate path loss in S-Band, the distance between Japanese station and TT&C ground system was obtained by using COTS (Commercial Off-The-Shelf) software. After that the signal strength of Japanese radio source placed at the TT&C ground system was calculated from link parameters such as transmitting EIRP, path loss, and receiving antenna gain. Consequently, this paper shows that the degradation caused by Japanese radio source is acceptable to TT&C ground system for satellite operation.

• ETRI Journal
• /
• v.22 no.1
• /
• pp.12-19
• /
• 2000

Wireless communication systems using airship have been proposed in worldwide. The airship will be located at the stratosphere about $20{\sim}23\;km$ above the sea level. The position of airship will vary within the station keeping range with time due to the drag of the wind in the stratosphere. When the earth station antenna has a high gain without the tracking function, the antenna performance may be degraded by a small variation of the airship. This means that variation of airship location could result in serious degradation of the system performance. In this paper, degradation in earth station's Equivalent Isotropic Radiated Power (EIRP) and Gain to noise Temperature ratio (G/T) due to the stratospheric platform movements has been derived by calculating the deviation angle of the main beam directions between the earth station and the platform antenna. In this case, the antenna of the earth station has been assumed circular and/or patch array antennas.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.40-49
• /
• 2004

최근에 새로운 전파이용기술이 상용화됨에 따라, 주파수 혼신 및 상호간섭에 의한 무선설비의 보호 및 전파이용 통신서비스의 질적 수준의 유지를 위하여 무선장비들에서 나오는 출력 전력을 제한하고 있다. 현재, 국내에서는 출력전력을 공중선전력(전도성전력)으로만 측정을 하는데, 이것은 실제로 복사되는 출력전력이 아니므로 좀더 정확한 출력전력의 측정방법을 알아보기 위해 국내.외의 복사성 전력의 기술기준 및 측정방법을 비교 분석하였다. 분석 결과 미국과 유럽은 실제로 복사되는 출력전력을 안테나에서 나오는 출력전력뿐만 아니라 안테나의 이득까지 고려한 복사성 전력인 EIRP(등가등방성복사 전력 : Equivalent Isotropic Radiated Power)와 ERP(유효복사전력: Effective Radiated Power)를 사용하여 측정하고 있었다. 또한 복사성 전력 측정시 주파수대 별로 1GHz이하인 경우에는 기준 안테나를 반파장 다이폴 안테나를 사용하여 ERP로 측정을 하며, 1GHz 이상인 경우에는 기준 안테나를 혼 안테나를 사용하고 ERP로 측정을 하고 있었다. 따라서,우리나라도 보다 정확한 출력 전력의 측정 및 규제를 위하여 실제로 복사되어지는 EIRP와 ERP를 고려 할 필요가 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1155-1164
• /
• 2011

In this paper, we proposed the transmit beam measurement method of active phased array antenna, which is installed in Korea's first developed naval medium range radar, using near-field measurement facility. The pulse-mode high power characteristics of active phased array antenna's trasmit-beam make it difficult to measure with general near-field measurement facilities where low power continuous RF signals are used. Thus, in this paper, the measurement method of active phased array antenna's transmit beam in conjunction with the near-field measurement facility, which is suitable for the high-power transmit beam measurement, and PNA-X network analyzer(Agilent Technologies), which can support pulse-mode measurement, was proposed and measured by near-field measurement techniques. And the EIRP(Effective Isotropic Radiated Power), the transmit characteristic of active phased array antenna, was measured by the near field measurement techniques and compared to numerical estimation which was nearly equal with small difference of 0.1 dB.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.459-470
• /
• 2008

DATS which is one of three subsystems of IDACS is responsible to receive Sensor Data, LRIT and HRIT in L-Band and transmit LRIT and HRIT in S-Band from/to COMS satellite. This paper shows detailed test procedures used to verify the performance and functionality of DATS after its implementation was completely finished. As a part of efforts to verify key DATS performance, G/T and EIRP were measured by using solar flux density as radio source. Regarding the verification of DATS functionality, RF loop-back test was conducted to validate if there is no BER degradation excepting MODEM/BB implementation loss occurred in the integrated DATS. Integrated with 13m antenna, DATS successfully restored image from received MTSAT-1R broadcasting data, LRIT and HRIT, of which frequencies are all L-Band. S-Band transmission was also verified through test antenna placed away from 13m antenna by measuring real LRIT and HRIT spectrum in S-Band. From those test results, DATS is determined to be fully ready to communicate with COMS in L-Band and S-Band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1125-1132
• /
• 2011

The purpose of this study is to suggest installation methods of a mobile-communication repeater into a lift system with consideration of EMC. Two approaches, one(Solution 1) is realized with a repeater installed in a lift hoistway and another(Solution 2) installed inside a lift, were proposed. It is confirmed that the Solution 1 is more effective than the Solution 2. And it is suggested that the EIRP of a repeater must be limited to be ${\leq}$-5 dBm by considering electromagnetic immunity level for a lift and safety margin of 20 dB. This limit can provide suitable electromagnetic environment inside a lift with precise power-control mechanism of mobile communication systems. This study could be a good example of Green ICT by improving electromagnetic environment in spite of radio use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1574-1580
• /
• 2021

This paper designs and presents the results of an air network simulation radio transmission link applied with a multi-beam active phase array antenna simulator in a testbed system for verifying an air network currently underway as a technology development task. Using the Ku band, the Radio transmission link was designed in consideration of the link budget to satisfy the requirements for the system being developed. Considering short-distance links and long-distance links, the required EIRP and G/T performance scales of multi-beam repeaters and mission planes were applied to confirm the minimum and maximum link margins based on Eb/No. In this Radio Transmission Link design, the application analysis results such as rainfall availability are used to effectively establish standards when selecting the operating radius of the multi-beam relay system and related system standards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1072-1081
• /
• 2012

For Ka-band satellite communication system, a new flexible payload technologies which can compensate rain attenuation have to be developed. The Ka-band satellite output power control technology enables to adjust downlink output power of satellite payload in Ka-band (19.8 ~ 22.2 GHz). In this paper, we introduce multi-beam antenna with multi-port amplifiers for Ka-band flexible output power allocation system. We have designed multi-beam antenna with array-fed reflector to form 8 beams on the Korean Peninsula. The target EIRP per beam is more than 59 dBW. The system is designed to present 6 dB boost beams for rainfall areas. Individual beams were optimized by the excited amplitude and phase of feed elements of the feed cluster. The multi-port amplifier(MPA) is one of effective approaches for flexible power allocation in combination with multi-beam antenna. In case of using MPA in multi-beam system, the inter-port isolation characteristic of MPA is important parameter to avoid interference among the output ports. In this paper, we propose a new MPA structure that consists of two $4{\times}4$ Buttler matrixes and phase/amplitude controllable power amplifier modules.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.359-365
• /
• 2002

In this work, a new type of the active array antenna for IMT-2000 base stations by using dual-polarization diversity is proposed and developed. As an element of array antenna, a single micorstrip patch antenna of ${\pm}$ 45$^{\circ}$slanted is designed by obtaining the bandwidth of 1,885 ㎒ to 22,000 ㎒. The polarization isolation between two linearly polarized waves is less than 16 ㏈. The gain of element antenna is more than 7 ㏈i. finally, 2${\times}$8 dual-polarization active array antenna is developed with ElRP of 1,200 W and polarization isolation of 20 ㏈ by placing a low power amplifier at each antenna element.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1247-1257
• /
• 2000

Offset-fed dish antennas are considered. Offset-fed dish antennas are widely used for DBS reception, the problem of offset-fed dish antenna has, however, received little attention because of its complicated and asymmetric geometry. A Fourier-transform technique and Physical Optics are employed to express the fields radiated from offset-fed reflector and feed horn aperture. The simultaneous equations are solved to obtain a solution in a fast convergent series, thus facilitating the numerical computation. For given parameters such as diameter of reflector, focal length, offset height of reflector center, exact solutions are derived. Since offset-fed dish antenna has an application as multi-beam antenna using multiple feed, a brief feasablity of dual beam antenna for Korea-SAT (116$^{\circ}$E, EIRP 59 dBW) and Orion-SAT (139$^{\circ}$E, EIRP 54 dBW) is given in Conclusion.