• 인터넷정보학회논문지
• /
• 제13권4호
• /
• pp.95-102
• /
• 2012

차량 애드 혹 네트워크(VANETs)를 위한 응용들의 개발은 지능적 안전 운송시스템 제공이라는 매우 제한적인 명확한 목표를 가지고 있다. 공공의 안전을 위한 긴급경고 기술은 제한된 시간에 신속하고 효율적으로 경고 메세지를 전달하는 지능형 방송 기법을 필요로 하는 응용중의 하나이다. VANETs 방송 프로토콜 설계 시에 접근제어 계층에서 여러 노드들이 동시에 전송을 시도할 경우, 다수 패킷들의 충돌과 여분의 지연을 발생하는 방송폭풍 문제가 고려되어야 한다. 본 논문에서는, 효율적으로 방송폭풍 문제와 시간 한계를 해결할 수 있는 조기 지능형 경보 방송(EI-CAST) 알고리즘을 제안한다. 제안 알고리즘은 충돌시간(TTC)에 기초한 조기경보 기술과 퍼지논리에 기초한 지능형 방송 기술을 사용하며, 시뮬레이션을 통해 제안 알고리즘과 기존 경보방송 알고리즘의 성능을 비교 평가 하였다. 실험결과 제안 알고리즘의 경우 경보 전송거리 4 km 이내의 차량들은 사고발생 이전에 경보메시지를 수신할 수 있으며 패킷 충돌이 없음을 확인할 수 있었다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.196-202
• /
• 2009

Study from Yogyakarta earthquake reconstruction program, cast-in-place wall using fix-size formwork system (Old-CIP) has offered a good alternative for house construction. A simulation has also confirmed that this system using mortar as the main material can provide cheapest cost and lowest total man power compared to conventional wall construction technique: brick or mortar-block wall. This paper presents the new wall construction technique: full size cast-in-place wall (New-CIP). The detail of how this new technique implemented is described. In addition, considering that material and labor cost in one area is different to others, cost analysis for different resources prices and wages of three cities are taken into a simulation. The analysis is aimed to distinguish the implementation feasibility of New-CIP system compared to the four common wall systems. Finally, its implementation resistance is also discussed.

• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.87-96
• /
• 1995

A new fungivle material named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic charateristics comparing with a conventional cast iron material. The dimensions of new column structure are adjusted to keep the same stiffness (EI value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up, one of which is for the measurement of natural mode and frequency using experimental modal analysis, and the other one is for the measurement of vibration amplitude during idling operation of a machine tool. The comparison of maximum accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measrued on the bed, motor base, and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite material exhibits a good anti- vibrational propderty even if it is used under the actual operational environments of machine tool as a practical structural element.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.267-278
• /
• 2022

Pre-stressed concrete circular spun piles are widely used in various infrastructure projects around the world and offer an economical deep foundation system with consistent and superior quality compared to cast in-situ and other concrete piles. Conventional methods for measuring the lateral response of piles have been limited to conventional instrumentation, such as electrical based gauges and pressure transducers. The problem with existing technology is that the sensors are not able to assist in recording the lateral stiffness changes of the pile which varies along the length depending on the distribution of the flexural moments and appearance of tensile cracks. This paper describes a full-scale bending test of a 1-m diameter spun pile of 30 m long and instrumented using advanced fibre optic distributed sensor, known as Brillouin Optical Time Domain Analysis (BOTDA). Optical fibre sensors were embedded inside the concrete during the manufacturing stage and attached on the concrete surface in order to measure the pile's full-length flexural behaviour under the prescribed serviceability and ultimate limit state. The relationship between moments-deflections and bending moments-curvatures are examined with respect to the lateral forces. Tensile cracks were measured and compared with the peak strains observed from BOTDA data which corroborated very well. By analysing the moment-curvature response of the pile, the structure can be represented by two bending stiffness parameters, namely the pre-yield (EI) and post-yield (EI_cr), where the cracks reduce the stiffness property by 89%. The pile deflection profile can be attained from optical fibre data through closed-form solutions, which generally matched with the displacements recorded by Linear Voltage Displacement Transducers (LVDTs).

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2001년도 발생공학 국제심포지움 및 학술대회 발표자료집
• /
• pp.14-17
• /
• 2001

Positional clonging (map-based cloning) of mutations or genetic variations has been served as an invaluable tool to understand in-vivo functions of genes and to identify molecular components underlying phenotypes of interest. Mice homozygous for the cerebellar deficient folia (cdf) mutation are ataxic, with cerebellar hypoplasia and abnormal lobulation of the cerebellum. In the cdf mutant cerebellum approximately 40% of Purkinje cells are ectopically located within the white matter and the inner granule cell layer (IGL). To identify the cdf gene, a high-resolution genetic map for the cdf-gene-encompassing region was constructed using 1997 F2 mice generated from C3H/HeSnJ-cdf/cdf and CAST/Ei intercross. The cdf gene showed complete linkage disequilibrium with three tightly linked markers D6Mit208, D6Mit359, and D6Mit225. A contig using YAC, BAC, and P1 clones was constructed for the cdf critical region to identify the gene. A deletion in the cdf critical region on chromosome 6 that removes approximately 150 kb of DNA selection. cdf mutant mice with the transgenic copy of the identified gene restored the brain abnormalities of the mutant mice. The positional cloning of cdf gene provides a good example showing the identification of a gene could lead to finding a new component of important molecular pathways.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 발생공학 국제심포지움 및 학술대회 발표자료집
• /
• pp.14-17
• /
• 2001

Positional cloning (map-based cloning) of mutations or genetic variations has been served as an invaluable tool to understand in-vivo functions of genes and to identify molecular components underlying phenotypes of interest. Mice homozygous for the cerebellar deficient folia (cdf) mutation are ataxic, with cerebellar hypoplasia and abnormal lobulation of the cerebellum. In the cdf mutant cerebellum approximately 40% of Purkinje cells are ectopically located within the white matter and the inner granule cell layer (IGL). To identify the cdf gene, a high-resolution genetic map for the cdf-gene-encompassing region was constructed using 1997 F2 mice generated from C3H/HeSnJ-cdf/cdf and CAST/Ei intercross. The cdf gene showed complete linkage disequilibrium with three tightly linked markers D6Mit208, D6Mit359, and D6Mit225. A contig using YAC, BAC, and P1 clones was constructed for the cdf critical region to identify the gene. A deletion in the cdf critical region on chromosome 6 that removes approximately 150kb of DNA was identified. A gene associated with this deletion was identified using cDNA selection. cdf mutant mice with the transgenic copy of the identified gene restored the brain abnormalities of the mutant mice. The positional cloning of cdf gene provides a good example showing the identification of a gene could lead to finding a new component of important molecular pathways.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1999년도 한국생물과학협회 학술발표대회
• /
• pp.31-31
• /
• 1999

Characterization of mutant mice has been utilized as an animal model for the study of human inherited diseases. In addition to the pathogenesis stduy using the mutant mice, the mice have been used for the identification of the genes causing the phenotypes. Functional cloning and positional cloning are two approaches, depending on the phenotypes of the mutant mice. Though it takes a long time positional cloning has been well used to identify the gene of which function can not be presumed from the mouse phenotype. Recently by the advance of the molecular tools and the human genome project close to 10,000 genetic markers are developed to make the procedure faster. We obtained a new mutant mouse, sims, spontaneously arose and the affected mouse has a mild tremor and seizure was observed. Homozygote in either sex is sterile since uterus growth in female and seminal vesicle in male are not induced for the growth in puberty, implying the abnormal hormonal regulation during puberty. Supporting this, there is no detectable testosterone in the serum of the mutant male and the brain of the mutant is 30% heavier than littermate. To identify the location of the mutated gene, intraspecies cross to CAST/Ei was carried out and the 37 affected mice was analyzed for the linkage. The gene was mapped on chromosome 18, 20 cM from the centromere. More than 500 F2 progenies have been analyzed for the linkage and the locus becomes narrow within 3cM between Egrl and Fgf gene.f gene.