• 전기의세계
• /
• v.19 no.6
• /
• pp.31-38
• /
• 1970

본문은 IEEE지 1970년월호 Spectrum에 나타난 서독내의 초고압송전선로에 관한 (Mr. J. Jansen)소개문으로서 철탑선로 및 애자설계에 서독기술자가 깊은 검토를 하여 서독에 알맞는 이상적인 송전망을 건설하여 왔다는 것이다. 현재 우리나라도 345kV 초고압송전망을 가까운 장래에 건설하고저 만반의 준비를 갖추고 있는 중이다. 따라서 서독의 초고압송전망에 관한 기사는 협소한 국토등 여건이 비슷한 우리에게 큰 참고가 될 부분이 많음으로 본지에 이것을 번역하여 관계기술자의 설계참고자료로 제공하고저 한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.902-904
• /
• 2007

A $SF_6$ gas circuit breakers are widely used for short circuit current interruption in EHV or UHV power system. During a $SF_6$ gas circuit breaker development, Simplified synthetic testing facility is used. This paper shows how simplified synthetic testing facility is used for a SF6 gas circuit breaker development.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1532-1534
• /
• 1999

Electrical treeing phenomenon, regarded as pre-breakdown which accelerates aging process leading an insulation to the complete breakdown, is with no doubt extremely fatal to the performance of the insulation. Investigated in this paper is electrical treeing representing local dielectric failure according to flow pattern, the flow history of liquid polyethylene formed during the extrusion process. Experiments of electrical tree initiation by means of ramp tests were conducted using newly developed electrode system with point-to-point structure. Constant voltage tests were also carried out with the electrode system to estimate the life time of the insulation. Results were analyzed using statistical method such as Weibull distribution.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1575-1577
• /
• 1999

XLPE is widely used as a main insulation in EHV power cables, deeply connected with thermal stress. In this study, the thermal history of XLPE insulation was examined using DSC(Differential Scanning Calorimetry). The principle is on the basis of the phenomenon that crystal in polyethylene is rearranged as it is annealed near/below the melting temperature. From the result, it was possible to define accurate temperature which was really applied on the XLPE insulation and this method was assured as a useful tool in characterization of thermal history in XLPE cable insulation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.196-201
• /
• 2000

It is very important not only to detect PD signal but also to locate PD source in power cable line including its accessories. In this paper, the PID localization technique using interruption of metal sheath of cable or accessory is described. By interruption of metal sheath, the polarity of PD pulse to be measured on each part can be compared. With this technique, the exact location of PD in the accessory which has some defects can be found. Although the 'Soft' interruption method, that is, cable sheath is divided by semi-conductive layer with the resistance of higher than 1 k$\Omega$, was used instead of 'Hard' interruption method, it is also possible to detect exact location of PD. This technique is considered to be very effective for detecting PD localization in the type test of cable and accessories.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1652-1654
• /
• 2004

초고압 지중 케이블을 전기적, 기계적으로 연결하는 역할을 하는 중간 접속함은 미가교 폴리에틸렌을 사용하여 현장에서 가교시키는 TMJ(tape molded Joint), 에폭시와 EPDM고무의 복합 절연구조를 가지고 있는 PJ(Prefabricated Joint), 그리고 EPDM또는 실리콘 고무를 단독으로 사용하는 PMJ(Premolded Joint)로 대표된다. 그러나 TMJ는 현장에서 가교하는 방식으로 조립 후 품질을 파악하기가 쉽지 않으며 PJ는 공장에서 미리 성형한 제품을 현장에서 조립만 하면 되는 구조이나 그 부품의 수가 많고, 이종 계면을 가지고 있는 복합절연구조를 가지고 있어 최근에는 부품의 수도 적고 조립이 간편하며 이종 계변의 수를 최소화하여 전기적 안정성을 높인 조립형 접속함인 PMJ를 선호하는 경향을 보이고 있다. 본 논문에서는 PMJ용으로 사용되는 실리콘 고무의 절연과 반도전 계면에서의 접착력과 전기적 파괴 특성간의 상관 관계를 규명하였고 또한 실리콘 고무의 상온 및 고온에서의 AC 및 Impulse 전압의 특성 변화와 Impulse 전압의 극성효과에 대해 규명하였다.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.251-254
• /
• 2001

Internal and external forces may be applied on the power cable in the both process of transportation and installation. Even though the EHV power cables have the structure of metal sheath and plastic jacket etc. to minimize these negative influences, the unusual forces result in the unexpected deformation of the cable. Compressing moulded XLPE model cable sheets were prepared and locally dented with round-edge and square-edge tools. All data were analyzed employing Weibull distribution. The breakdown strength of dented molded specimens showed lower values than the normal ones by 10-60%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1566-1570
• /
• 2007

[ $SF_6$ ] gas circuit breakers are widely used for short circuit current interruption in EHV(Extra High Voltage) or UHV(Ultra High Voltage) power systems. To develop $SF_6$ gas circuit breakers, the arc resistance value is necessary to compare experimental results to numerical ones. The arc resistance value can be obtained from a breaking test with a $SF_6$ gas circuit breaker. The direct testing or synthetic testing facility is widely used to verify the breaking ability for $SF_6$ gas circuit breakers. We employed the simplified synthetic testing facility to test a $SF_6$ gas circuit breaker prototype. The arc resistance characteristic was measured and calculated under the various experimental conditions. This arc resistance value can be used for verifying the numerical results from arc simulation in a circuit breakers.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.123-127
• /
• 2003

액상실리콘으로 이루어진 초고압전력케이블용 프리몰드 접속재의 반도전-절연체 계면접합체를 다양한 제조조건과 조합별로 제조하여 계면접착력에 대한 영향을 검토하였다. 후가교적용 시 계면접착력이 강화되며 grade조합에 따른 특성차이가 존재하였다. 하지만 고온 장시간의 후가교 조건에서는 계면간의 화학적 결합력의 저하로 인해 오히려 접착력이 낮아지기도 하였다. 절연 RTV와의 계면접착성은 S-1재료가, 절연 LSR의 경우에는 S-3 재료가 가장 우수하였으며 도전안정성 측면에서도 S-3 재료가 상대적으로 유리하였다. 매입형 전극체를 제조하여 절연파괴거동을 연구한 결과 계면접착성과의 직접적인 상관관계는 크지 않음을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.903-906
• /
• 1992

At present the XLPE insulated power Cables have installed until 154KV level in KOREA. Therefore, our company has developed 275KV XLPE cable as a means 345KV level-up of CV cable as well as exploitation of overseas markets. In this paper, the outline of design standards, manufacturing processes and test performance of 275KV CV cable are described.