• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.26-33
• /
• 2014

In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.

• 한국수산과학회지
• /
• 제40권6호
• /
• pp.343-349
• /
• 2007

This study examined the effective utilization of pearl processing by-products. Three extracts of hot-water extract (WE), hydro-cooked extract (HE), and two-step enzymatic hydrolysate (EH) were prepared from pearl oyster muscle, and their characteristics were examined. The moisture, crude protein, volatile basic nitrogen (VBN), and amino-N contents were 97.5-98.0%, 0.5-1.3%, 2.1-4.9 g/100 mL, and 35.0-74.5 g/100 mL, respectively. EH had the lowest VBN and highest amino-N contents. In addition, EH had the highest yields. In terms of its functional properties, EH inhibited angiotensin-I converting enzyme ($IC_{50}$, 1.39 mg/mL) more strongly than the other extracts ($IC_{50}$, 4.17-7.95 mg/mL). The free amino acid contents of WE, HE, and EH were 661, 470 and 1,150 mg/100 mL, respectively. Major amino acids were taurine and glutamic acid. Major inorganic ions were Na, Mg, and Ca. Contents of taste compounds, such as free amino acids, inorganic ions, and quaternary ammonium bases, differed significantly according to the extract methods. Based on the results of chemical experiments and sensory evaluation, the quality of EH was superior to the other extracts, and EH is suitable for use in natural flavoring materials.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.821-830
• /
• 2010

Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1021-1027
• /
• 2010

The charpy impact property was lower at the surface and middle regions than that at the root region in metal welded by Tandem EGW of 82 mm thick EH40-TM steel plates. Temperature distribution in the weld sample and the heating/cooling temperature throughout the various regions in the weld metal were estimated by the commercial weld simulation program SYSWELD. The microstructure of the weld metal consisted of acicular ferrite and grain boundary ferrite. Grain boundary ferrite in the acicular ferrite matrix was found more in the surface and middle regions than in the root region, and the acicular ferrite was also coarser in the surface and middle regions where the impact toughness was lower and the input temperature was higher. Our results indicated that the impact toughness property was related to the microstructure morphology, the distribution of grain boundary ferrite, and the acicular ferrite.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.311-314
• /
• 2001

• 한국미생물·생명공학회지
• /
• 제27권2호
• /
• pp.129-135
• /
• 1999

EH-1 was highest at 9 days of incubation. This regrowth and enzymatic activity of Haloarcular sp. EH-1 was highest at 9 days of incubation. This amylase was purified by acetone fractionation, DEAG-Cellulose column chromatography, 1st Sephadex G-75 gel filtration, CM-Cellulose column chromatography and 2nd Sephadex G-75 gel filtration. The amylase was purified about 98.64 fold with a yield of 11.75%. The molecular weight of amylase was estimated to be about 43,000and 40,000 by gel filtration and SDS-polyacrylamide gel electrophoresis, respectively, suggesting that the enzyme was a monomer. Amylase had an optimal temperature of 4$0^{\circ}C$, and an optimum pH of 7.0, and the thermal stability was observed the above 50% at 10$0^{\circ}C$ after 1 hour, and the stable range of pH was 6.0 to 8.0. The enzymatic activity was increased in the presence of 10 mM 2-mercaptoethanol, slightly by 10 mM SnCl2.2H2O.FeCl2.4H2O.CuCl2.2H2O.HgCl2.6H2O and SDS. End products from soluble starch were glucose, maltose and maltotriose, and Km value for soluble starch was 2.5mg/ml.

• Journal of Plant Biotechnology
• /
• 제49권1호
• /
• pp.90-98
• /
• 2022

This study was performed to determine the optimal ratio for preparing an extract comprising the Ecklonia cava and Hizikia fusiformis complex as a therapeutic material for alleviating inflammatory respiratory diseases. First, to examine the optimal ratio for preparing the complex (SD-EH), Ecklonia cava and Hizikia fusiformis extracts were used; four extracts with different mixing ratios were prepared. The effects of the SD-EH extract on MUC5AC mRNA expression in PMA-treated NCI-H292 cells were analyzed; it was confirmed that the MUC5AC expression was significantly reduced after treatment with the SD-EHA-001 (E(100) : H(0)), SD-EHB-001 (E(90) : H(10)), SD-EHC-001 (E(80) : H(20)), and SD-EHD-001 (E(70) : H(30)) extracts. Western blotting was used to determine whether the SD-EH extract affects the expression levels of COX-2 and MMP-9 in PMA-treated A549 cells. The protein expression levels of COX-2 and MMP-9 were significantly lower (p < 0.001) in the cells treated with the SD-EHC-001 (E(80):H(20)), SD-EHD-001 (E(70) : H(30)), and SD-EHE-001 (E(60) : H(40) extracts than in the cells treated with PMA alone. The SD-EHC-001 (E(80) : H(20)) extract markedly downregulated the expression levels of MUC5AC, COX-2, and MMP-9. Therefore, the SE-EH extract may serve as a potential therapeutic agent for treating inflammatory respiratory diseases.

• 전산구조공학
• /
• 제27권1호
• /
• pp.34-40
• /
• 2014

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.9-16
• /
• 2019

Recent economic trends are worsening and becoming longer, and Korean shipbuilding is focused on high value added and high technology, especially for LNG carriers and large container ships. Both ship types increased in size in the 2010s but have requirements such as high strength, toughness at low temperatures and continuous weldability for preventing brittle fractures at service temperatures. In particular, as container ships become larger, the International Classification Society (IACS) has established a provision (IACS UR S33) that mandates the use of BCA (Brittle Crack Arrest) certified vessels for large container vessels contracted after 2014 to ensure safety. Therefore, studies on BCA 47Y.P are currently being undertaken, but BCA 40Y.P has not been actively studied yet. We will test BCA 40Y.P to verify why it can be applied to a large container ship and measure fatigue cracking.

• KSBB Journal
• /
• 제20권4호
• /
• pp.311-316
• /
• 2005

EH의 catalytic nucleophile residue, His-Asp로 구성된 charge relay system, oxyanion hole 등의 EH 관련 conserved domain의 아미노산 공통 서열을 참고로 하여 G. westfalica megaplasmid로부터 putative EH를 선별할 수 있었다. Bioinformatics를 기반으로 스크리닝한 G. westfalica에 의한 라세믹 styrene oxide 기질에 대한 입체선택성 가수분해 반응에 있어 중요 반응 parameter들인, pH 및 온도 등이 초기 가수분해반응속도에 미치는 영향을 분석하고, 최적 회분식 반응조건을 결정하였다. 최적 반응조건인 pH 7, 반응 온도 $30^{\circ}C$, 생촉매량 40 mg의 조건에서 약 5시간 20분간 반응을 통해 20 mM 라세믹 기질로부터 광학순도 $100\%$ ee인 (S)-styrene oxide를 $36.5\%$의 수율로 얻을 수 있었다.