• The Journal of Fisheries Business Administration
• /
• v.49 no.4
• /
• pp.19-36
• /
• 2018

Overstock in aquaculture is a matter of concern in aquaculture management. To sort fish based on fingerling size in case of overstocking is an important problem in aquaculture farm. This study aims to determine the amount of fry overstock and sorting time in aquaculture farm. This study builds a mathematical model that finds the value of decision variables to optimize objective function summing up the fingerling purchasing cost, aquaculture farm operating cost and feeding cost under mortality and farming period constraints. The proposed mathematical model involves following biological and economical variables and coefficients: (1) number of fingerlings, (2) sorting time, (3) fish growth rate and variation, (4) mortality, (5) price of a fry (6) feeding cost, and (7) possible sorting periods. Numerical simulation is presented herein. The objective of numerical simulation is to provide decision makers to analyse and comprehend the proposed model. When extensive biological data about growth function of fry becomes available, the proposed model can be widely applicable to real aquaculture farms.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.146-156
• /
• 2020

Two High Tensile Strength Steel (EH47) plates with thickness of 70 mm were butt-welded together by multi-pass Submerged Arc Welding (SAW), also the hardness and welding residual stress were investigated experimentally. Based on Thermal-Elastic-Plastic Finite Element (TEP FE) computation, the thermal cycles during entire welding process were obtained, and the HAZ hardness of multi-pass butt welded joint was computed by the hardenability algorithm with considering microstructure evolution. Good agreement of HAZ hardness between the measurement and computational result is observed. The evolution of each phase was drawn to clarify the influence mechanism of thermal cycle on HAZ hardness. Welding residual stress was predicted with considering mechanical response, which was dominantly determined by last cap welds through analyzing its formation process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.1
• /
• pp.319-333
• /
• 2022

In order to enhance system energy efficiency, bidirectional link resource allocation strategy in GFDM-based multiuser SWIPT systems is proposed. In the downlink channel, each SWIPT user applies power splitting (PS) receiver structure in information decoding (ID) and non-linear energy harvesting (EH). In the uplink channel, information transmission power is originated from the harvested energy. An optimization problem is constructed to maximize weighted sum ID achievable rates in the downlink and uplink channels via bidirectional link power allocation as well as subcarriers and subsymbols scheduling. To solve this non-convex optimization problem, Lagrange duality method, sub-gradient-based method and greedy algorithm are adopted respectively. Simulation results show that the proposed strategy is superior to the fixed subcarrier scheme regardless of the weighting coefficients. It is superior to the heuristic algorithm in larger weighting coefficients scenario.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.80-92
• /
• 1977

This experiment investigated the effect of various moisture levels on the top and root growth of barley and its yield. Resistant varieties to excess moisture injury shortened plant height, but tillered more, having creeping plant type compared with ordinary one, and greater portion of root of this varieties occured at the deeper soil depths with longer root length. However, susceptible one to excess moisture injury showed an inversed trend when compared with the untreated one. Oversaturated treatment compared with the untreated increased a little bit soil temperature and Eh of soil. Increased root activity and increased yield were obtained with resistant varieties compared with the untreated. Lower root activity and less yield than those of the untreated were observed in both extreme treatments. Yield reduction in both the extreme treatments was mainly due to reduction of tiller number, grain number and 1, 000-grain weight. Highest yield reduction was marked at the stage of internode elongation in the oversaturated and at the booting stage in the overdried treatment.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.469-483
• /
• 1999

Two different types of deep groundwaters occur together in the Jungwon area: $CO_2$-rich water and alkali water. Each water shows distrinct hydrogeochemical and environmental isotopic characteristics. The $CO_2$-rich waters are characterized by lower pH(6.0~6.4), higher Eh (25~85mV) and higher TDS content (up to 3,300 mg/l), whereas the alkali type waters have higher pH (9.1~9.5), lower Eh (-136~-128mV) and lower TDS content (168~254 mg/l). The CO2-rich waters ($Pco_2$=up to 1atm) were probably evolved by the local supply of deep $CO_2$ during the deep circulation, resulting in enhanced dissolution of surrounding rocks to yield high concentrations of $Ca^{2+}, Na^+, Mg^{2+}, K^+\; and \;HCO_3\;^-$ under low pH conditions. On the other hand, the alkali type waters ($Pco_2$=about 10-4.6 atm) were evolved through lesser degrees of simple wate/rock (granite) interaction under the limited suppy of $CO_2$. The alkali waters are relatively enriched in F- (up to 14mg/l), whereas the F- concentration of$CO_2$-rich water is lower (2.2~4.8 mg/l) due to the buffering by precipitation of fluorite. The oxygen-hydrogen isotopes and tritium data indicate that compared to shaltion ($\delta$18O=-9.5~-7.8$\textperthousand$),two different types fo deep groudwaters (<1.0TU)were both derived from pre-thermonuclear (more than 40 years old) meteoric waters with lighter O-H isotopic composition ($\delta$18O=-9.5~-7.8$\textperthousand$) and have evolved through prolonged water/rock interaction. The $CO_2$-rich waters also show some degrees of isotopic re-equilibration with $CO_2$ gas. The $\delta^{34}S$ values of dissolved sulfates (+24.2~+27.6$\textperthousand$) in the $CO_2$-rich waters suggest the reduction of sulfate by organic activity at depths. The carbon isotope data show that dissolved carbon in the $CO_2$-rich waters were possibly derived either from dissolution of calcite or from deep $CO_2$ gas. However, strontium isotope data indicate Ca in the $CO_2$-rich waters were derived mainly from plagioclase in granite, not from hydrothermal calcites.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.40-47
• /
• 1994

The objective of this research was to examine the effect of ammonium thiosulfate(ATS) on urease activity and on biological and chemical properties of flooded paddy soil especially having high organic matter content by comparing with the effect of sodium thiosulfate(STS). The results obtained are summarized as follows. 1. The hydrolysis of urea was inhibited at 3 and 5 days after treatment of thiosulfate(ATS and STS) +glucose and thiosulfate only, respectively. The inhibitory effect of ATS on urea hydrolysis was slightly lower than that of STS in glusoce-added soils, but when the glucose was not added, the effects of ATS and STS were not different significantly. 2. The soil pH and Eh was lowered by 0.3~0.5 units and 30~120 mV, respectively, when incubated flooded soil with ATS and glucose at $25^{\circ}C$. 3. Soil respiration rate in/flooded soil was increased by 10~70% with the treatment of ATS during the 20 day experimental period. 4. The contents of acetic and butyric acid in thiosulfate treatment soil was below $10{\mu}g/g$, which was lower than that($220.3{\mu}g/g$) of critical growth inhibition of rice.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.513-518
• /
• 1996

저농도 방사성 액체폐기물의 최종 처리를 목적으로 본 연구에서는 면 35%와 Polyester 65%가 함유된 합성섬유를 증발매체로 하여 자연상태의 공기를 강제 송풍시키는 자연증발처리시설에서 증발에 영향을 미치는 주요 변수에 따라 증발 단위 면적당 Cs-137, Co-60을 함유한 방사성 폐액의 증발량측정 및 제염계수를 조사하였다. 증발효과는 유입공기의 습도가 낮고, 공기의 유속과 공급액의 유량이 증가하고 유입공기 및 폐액의 온도가 높아질수록 증발량이 증가하였다. 실험결과 유입된 공기는 1$0^{\circ}C$ 이상, 습도는 80% 이하, 공급폐액의 유량이 3.4 $\ell$/hr $m^2$ 이상, 공기유속은 1.14~l.47 m/sec 범위가 조업조건이며 이때 제염계수는 5.1 $\times$ $10^3$, 배출공기의 방사능 농도는 4.7$\times$$10^{-13}$ $\mu$Ci/$m\ell$ air로 측정되었다. 공급유량이 4.6$\ell$/hr.$m^2$와 공기유속이 1.47 m,/sec일때 최대 증발조건으로 나타났으며, 이때 증발량은 총 증발면적 11,250$m^2$ 에서 1.2 ㎥/hr로 측정되었으며 대기의 온.습도 및 풍속에 따른 실험을 통하여 달톤형 증발식의 Wind Factor ［Eh ＝ (0.0168 ＋ 0.0141V)$\Delta$H］를 도출하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.207-213
• /
• 2009

This experiment was performed to understand the relationship between uptake of Fe and Mn by plants, red pepper and tomato, and soil physico-chemical properties under different soil conditions at an environmentally controlled chamber in NAAS(National Academy of Agricultural Science) in 2008. After the dipping for 3 days, four treatments, dipping, dipping+aeration, drainage, drainage+aeration, were set up to investigate the changes in soil redox potential and moisture content. Drainage+aeration changed soil to the oxidation condition from 72 hrs of treatment, and soil moisture content was immediately reduced after treatment. Uptake of Fe and Mn of red pepper was investigated with two treatments, soil only and the mixed[soil(50%) : bed soil(35%) : bark(15%)]. Red pepper leaves taken at 30 days after treatment absorbed excessively Mn from the treatment of soil only and the mixed, and thus uptake of iron was strongly reduced. Also, uptake pattern of Fe and Mn of tomato was examined with four treatment, soil only, soil(50%) + rice straw(50%), soil(50%) + compost(50%) and soil + aeration. Contents of Fe and Mn in tomato leaves was measured at 60 days after treatment. Fe content was the greatest in soil(50%) + compost(50%) whereas Mn content was the highest in soil only. As a result of this experiment, plant growth was stronger influenced by soil moisture content than redox potential or porosity, and the oxidation status of soil was likely to promote that plant predominantly absorbed Mn from soil and thus resulted in Fe deficiency.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.37-44
• /
• 2008

This study was performed to synthesize Na-A type zeolite with melting slag from the Mapo incineration site and recycle the zeolite as an environmental remediation agent. The melting slag used had a favorable composition containing 26.6% $SiO_2$, 10.9% $Al_2O_3$ and 2.7% $Na_2O$ for zeolite synthesis although there were high contents of iron oxides, including 19.6% $Fe_2O_3$ and 18.9% FeO, which had been used as a flux for the melting. It was confirmed that the Na-A type zeolite could be successfully synthesized at $80^{\circ}C$ and $SiO_2/Al_2O_3\;=\;0.80{\sim}1.96$. The cation exchange capacities (CEC) of the zeolites was determined to be about 220 cmol/kg leveled off at the synthetic time more than 10hrs. The adsorption capacities of zeolite to heavy metals (Cd, Cu, Mn and Pb) were high except for As arid Cr. It was also confirmed through the Eh and pH analysis that As and Cr existed in the forms of $HAsO_4^{2-}$ and $CrO_4^{2-}$. The low absorption rates of zeolite for As and Cr are attributed to the fact that the pore size ($4\;{\AA}$) of Na-A type is smaller than those of $HAsO_4^{2-}$ and $CrO_4^{2-}$ ions ($4\;{\AA}$ ionic radii and $8\;{\AA}$ diameter).