• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.175-181
• /
• 2019

This paper suggests a velocity integration algorithm for Synthetic Aperture Radar (SAR) motion measurement to reduce discontinuity of range error. When using position data from Embedded GPS/INS (EGI) to form SAR image, the discontinuity of the data degrades SAR image quality. In this paper, to reduce the discontinuity of EGI position data, EGI velocity integration is suggested which obtains navigation solution by integrating velocity data from EGI. Simulation shows that the method improves SAR image quality by reducing the discontinuity of range error. INS is a similar algorithm to EGI velocity integration in the way that it also obtains navigation solution by integrating velocity measured by IMU. Comparing INS and EGI velocity integration according to grades of IMU and GPS, EGI velocity integration is more suitable for the real system. Through this, EGI velocity integration is suggested, which improves SAR image quality more than existing algorithms.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.80-90
• /
• 2004

Watermarking algorithm for 3D mesh model using EGI distribution of each patch is proposed. The proposed algorithm divides a 3D mesh model into 6 patches to have the robustness against the partial geometric deformation. Plus, it uses EGI distributions as the consistent factor that has the robustness against the topological deformation. To satisfy both geometric and topological deformation, the same watermark bits for each subdivided patch are embedded by changing the mesh normal vectors. Moreover, the proposed algorithm does not need not only the original mesh model but also the resampling process to extract the watermark. Experimental results verify that the proposed algorithm is imperceptible and robust against geometrical and topological attacks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.226-232
• /
• 2003

In this paper, design rule of power island is studied. Power island have a defect that increase transfer noise when each power bus structure is resonant. So, in this paper, resonances are suppressed for various noise source positions and in order to improve noise characteristics, it is suggested EGI in order to improve noise characteristic. At the simulation result, the least resonance is showed for various noise source position and transfer impedance with power bus resonance is reduced about 11 $\Omega$ by EGI.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.13-18
• /
• 2003

In this paper, we researched on the improved method for transferring noise which is generated from power island. In general case, the power island has a drawback where the noise transfer increase because of the structural resonance in each power bus. Thus, this paper suggests two improved methods that reduces the noise transfer. First method is to suppress the structural resonance by varying the source of the noise. The second method is to utilize the EGI in order to minimize the EGI in order to minimize the transfer of the noise when the resonance occurs. The simulation analysis shows that the relocation of the noise source dramatically minimized the resonance in power bus and the utilization of EGI has effectively reduced the noise transfer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.285-293
• /
• 2020

In this paper, to improve Synthetic Aperture Radar (SAR) image quality, the effect of time synchronization error in the EGI/IMU (Embedded GPS/INS, Inertial Measurement Unit) integrated system is analyzed and state augmentation is applied to compensate it. EGI/IMU integrated system is widely used as a SAR motion measurement algorithm, which consists of EGI mounted to obtain the trajectory and IMU mounted on the SAR antenna. In an EGI/IMU integrated system, a time synchronization error occurs when the clocks of the sensors are not synchronized. Analysis of the effect of time synchronization error on navigation solutions and SAR images confirmed that the time synchronization error deteriorates SAR image quality. The state augmentation is applied to compensate for this and as a result, the SAR image quality does not decrease. In addition, by analyzing the performance and the observability of the time synchronization error according to the maneuver, it was confirmed that the time-variant maneuver such as rotational motion is necessary to estimate the time synchronization error adequately. In order to reduce the influence of the time synchronization error on the SAR image, the time synchronization error must be compensated by performing maneuver changing over time such as a rotation before SAR operation.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.263-266
• /
• 2003

본 논문에서는 패치별 EGI 분포를 이용한 3D 다각형 메쉬 모델 (polygonal mesh model) 워터마킹 알고리즘을 제안하였다 제안한 알고리즘에서는 기하학적 변형에 견고하기 위하여 3D 메쉬 모델을 6개 패치로 분할한다. 그리고 위상학적 변형에 견실한 특성을 가지는 EGI 분포를 각 패치별로 구한다. 그리고 동일한 워터마크 비트열을 각 패치의 EGI 분포 중에서 길이가 큰 면체에 투영된 메쉬 법선 벡터들에 각각 삽입한다. 본 논문에서 제안한 워터마킹 알고리즘의 성능 평가를 위한 모의 실험에서 워터마크가 삽입된 모델의 비가시성 및 다양한 공격에 대한 견고성이 우수함을 확인하였다.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.6
• /
• pp.307-315
• /
• 1993

A study on a new anti-finger printed EGI steel sheet with high corrosion resistance has been carried out to meet the recent requirement of high quality and performance of the pure zinc electrogalvanized steel sheet. The substrate was the pure zinc electrogalvanized sheet with the metallic coating of 20g/$\m^2$. The two differ-ent processes for inorganic(chromating) and organic(resin) coating were applied. One was a two coat/two bake type to separately treat chromating and resin coating which is now widely used. The other was a one coat/one bake type to simultaneously treat them which is newly developed in this study. The solution for the one coat/one bake type was an aqua-base coating agents which was composed of inorganic and organic components. The new anti-finger printed EGI steel sheet with the Cr and resin coating weight of 13mg/$\m^2$ and 800mg/$\m^2$, respectively shows the superior corrosion resistance besides the good paintability, formability fingerprint resistance and earth characteristics properties.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.289-298
• /
• 2007

The EGI system is a new communication method in limelight for helping disabled users to input and handle information on the computer more easily. However, due to the EGI system's "JEM(Jittery Eye Movements)" generation, it actually increases heavy psychological and physiological stresses for the user to input or perceive the target information on a machine. This study illustrates how to resolve this "JEM" issue and suggests a method that is easy and simple to be controled by anyone. A demo tool was built and tested to find and prove the reasons for "JEM" This test shows that that the case with snap up is less stressful than without to input text as a final result of the test evaluation in both psychological snap up and physiological brain wave test. Postnatal or naturally acquired, it is found that the disabled can have opportunities for smoother communication, and a possible efficient system development for better communication.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.173-176
• /
• 2002

본 논문에서는 파워 아일랜드(power island)에서 발생되는 잡음 전달을 개선하는 방법에 대해서 연구하였다. 일반적으로 파워 아일랜드는 각 파워 버스(power bus)의 구조적 공진에 의해 잡음 전달이 증가하는 단점이 있다. 따라서 본 논문에서는 두 가지의 잡음 전달 개선 방법을 제시하였다. 첫 번째로 잡음원의 위치를 변화시킴으로서 구조적 공진을 억제하였다. 두 번째로 공진이 발생할 경우 잡음 전달을 감소시키기 위해서 EGI(Elevated Ground Island)를 제안하였다. 해석결과, 잡음원의 위치에 따라 파워 버스의 공진을 최소로 감소시켰으며, EGI를 이용하여 잡음 전달을 효과적으로 감소할 수 있었다.

• 발명특허
• /
• v.13 no.12 s.154
• /
• pp.21-24
• /
• 1988