• 한국물환경학회지
• /
• 제40권2호
• /
• pp.67-78
• /
• 2024

The introduction of a significant amount of phosphorous into aquatic environments can lead to eutrophication, which can in turn result in algal blooms. For the effective management of watersheds and the prevention of water quality problems related to nonpoint organic matter (OM) sources, it is essential to pinpoint the predominant OM sources. Several potential OM sources were sampled from upper agricultural watersheds, such as fallen leaves, riparian reeds, riparian plants, paddy soil, field soil, riparian soil, cow manure, and swine manure. Stream samples were collected during two storm events, and the concentrations of dissolved organic carbon (DOC) and phosphorous (DOP) from these OM sources and stream samples were assessed. DOM indicators using fluorescence spectroscopy, including HIX, FI, BIX, and EEM-PARAFAC, were evaluated in terms of their relevance in discerning DOM sources during storm events. Representative DOM descriptors were chosen based on specific criteria, such as value ranges and pronounced differences between low and high-flow periods. Consequently, the spectral slope ratio (S_R) paired with fluorescence index (FI) using end-member mixing analysis (EMMA) proved to be suitable for estimating the contribution of organic carbon (OC). The contribution of each organic phosphorous (OP) in stream samples was determined using the phosphorous-to-carbon (P/C) ratio in conjunction with the OC contribution. Notably, OP derived from swine manure in stream samples was found to make the most dominant contribution, ranging from 61.3% to 94.2% (average 78.1% ± 12.7%). The results of this research offer valuable insights into the selection of suitable indicators to recognize various OM sources and highlight the main sources of OP in forested-agricultural watersheds.

• 대한환경공학회지
• /
• 제31권9호
• /
• pp.803-810
• /
• 2009

본 연구에서는 유역특성이 뚜렷이 구분되는 시화호 유역(농촌, 도심지역, 공단지역)의 하천수 및 공단폐수를 대상으로 형광 3D-EEMs (3-Dimensional Excitation Emission Matrix Spectroscopy)를 이용하여 DOM (Dissolved Organic Matter)의 공간적 분포 특성을 파악하였다. 또한, 강우시 synchronous와 3D-EEMs를 이용하여 시간에 따른 DOM의 변화 특성을 보았다. 3D-EEMs로 부터 나타난 주요 DOM 물질은 휴믹계물질(Humic Like Substances, HLS)과 단백질계물질(Protein Like Substances, PLS)로 농촌 및 도심유역에서는 HLS가 주로 분포하였으며, 공단유역에서는 HLS 뿐만 아니라, PLS도 높게 나타났다. 각 지점별 DOM의 형광 peak $T_1:C_1$ ratio로 부터 반월공단(3TG)에서 난분해성 휴믹계 물질이 매우 높은 것으로 나타났다. 또한, 조사지점의 PLS 물질(peak $T_1$, peak $B_1$)과 BOD 농도가 직선의 상관성($r^2$=0.65, $r^2$=0.66)을 보여, 이러한 원인은 하수 유입 등에 의한 영향으로 보인다. 강우시(Rainfall, 30 mm) 시간에 따른 DOM의 모니터링 결과, 농촌유역에서는 HLS와 PLS가 비강우시와 비교하여 형광세기만 높아졌을 뿐, 구성 물질 의 변화 특성은 보이지 않았다. 한편, 도심유역에서는 HLS의 강우 초기 30분 내에 유출이 높은 것으로 나타났으며, 공단유역(4TG)에서도 강우 초기 20분 내에 HLS와 PLS의 유출이 매우 높게 나타났다. 본 연구로부터 형광 3D-EEMs는 유역의 DOM 기원을 밝히고, 비점오염원 및 하 폐수를 모니터링 하는데 있어 유용한 tool로 적용될 수 있음을 제시한다.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.225-230
• /
• 2001

Morphological characteristics of the asymmetric mandible in 135 adult male patients were investigated. Panoramic X-ray images were recorded. Age, ramus height, antegonial notch height, condylar height, coronoid process height, ramus body height and condylar neck angle were calculated and measured. Statistical analysis of unpaired two-tailed t-test and correlation coefficients was performed to find the morphologic differences between short ramus height side and the other. Condylar height and ramus body height in short ramus height side were smaller than those of the other side. Antegonial notch height, coronoid process height, condylar neck angle showed no differences. Condylar neck height was correlated with condylar neck angle.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1461-1471
• /
• 2002

Linear motor has a lot of advantages in comparison with conventional feed mechanisms: high velocity, high acceleration, good positioning accuracy and a long lifetime. An important disadvantage of linear motor is its high power loss and heating up of motor and neighboring machine components in operation. For the application of the linear motors to precision machine tools an effective cooling method and thermal optimizing measures are required. In this paper Finite-Element-Method for the thermal behavior of synchronous linear motor is introduced, which is useful for the design and manufacturing of linear motors. By modeling the linear motor the orthotropic physical properties of the sheet metal and windings were considered and convective coefficient in the water cooler and to the surroundings was defined by analytical and experimental method. The calculated isothermal lines could analyze the heat flow in the linear motor.

• 상하수도학회지
• /
• 제24권3호
• /
• pp.307-317
• /
• 2010

This study was conducted in order to investigate bulk organic matter characteristics and behavior of geosmin and 2-methylisoborneol (2-MIB) during riverbank filtration, which are general surrogates of taste and odor in drinking water. Column studies were used to simulate bank filtration systems. Most of the aliphatic organic matter was removed effectively after soil passage, and it is believed to be polysaccharides according to LC-OCD and F-EEM analysises. Removal efficiencies of geosmin and 2-MIB within the filtration column reached above 95%. It was found that the removal of total dissolved organic matter has a correlation with that of geosmin and 2-MIB in the near of filtration surface (about 50cm).

• 수산해양기술연구
• /
• 제32권3호
• /
• pp.286-293
• /
• 1996

This paper established the analytical model of sea surface oscilation of simple type fishing port with vertical wave absorbor. This model is composed by MAEM(Matched Asymptotic Expansion Method) for wave amplification in fishing port and EEM(Eigen - function Expansion Method) for wave absorbing characteristics against vertical perforated plates. Dimensionless porosity by adopting Darcy's law was introduced to evaluate wave absorbing characteristics of the perforated structure. Using the model, the efficiency of the vertical perforated plates was studied for fishing port tranqulity with number of plates, array method and plate intervals. Optimal design and arrangement of perforated plates can be applied to develop multipurpose fishing ports and villages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.406-408
• /
• 1997

This paper presents the new method of a nondestructive spot welding state inspection system using neural networks. The learning process of neural networks makes the inspection system to adapt the variable welding parameters. The inspecting process is working with on-line real-time after off-line learning process. This neural network based inspection system shows reliable results through the field test for variations of applied voltages, currents, and contact area of the welding electrode.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.11-17
• /
• 2001

In this paper, spherical Luneburg lens antennas have been systematically analyzed using the Eigenfunction Expansion Method (EEM), The developed technique has capability of performing a complete 3-D analysis to characterize the multi-layered dielectric spherical lens with arbitrary permittivity and permeability. This paper describes the analysis technique, and presents the results of the parametric study of Luneburg lens antennas by varying design parameters suoh as the diameter of the lens antenna (up to 80 wavelength), number of spherical shells (up to 30 shells), air-gaps between spherical shells, and dielectric loss of the material. Many representative engineering design curves including the far-field patterns, wide-angle sidelobe characterizations, antenna efficiency have been presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.360-361
• /
• 2008

A new kind of SBM co-polymer binder as styrene, n-butyl acrylate, and methacrylic acid (SBM) monodisperse co-polymer binder materials basted on $TiO_2$ pastes was synthesized and this $TiO_2$ pastes were applied of dye-sensitized solar cells (DSSCs). The SBM co-polymer binder was prepared by soap-free emulsion copolymerization using a PEG-EEM macromonomer. The photoanodes were characterized by morphology investigated from field emission scanning electron microscopy (FE-SEM). The photoelectrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density. DSSC based on the emulsion co-polymer binder was obtained conversion efficiency of 7.1% under irradiation of AM 1.5($100mWcm^{-2}$).

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.497-508
• /
• 2020

In the geochemical field, the chemical speciation of hexavalent uranium (U(VI)) has been widely investigated by performing measurements to determine its luminescence properties, namely the excitation, emission, and lifetime. Of these properties, the excitation has been relatively overlooked in most time-resolved laser fluorescence spectroscopy (TRLFS) studies. In this study, TRLFS and continuous-wave excitation-emission matrix spectroscopy are adopted to characterize the excitation properties of U(VI) surface species that interact with amorphous silica. The luminescence spectra of U(VI) measured from a silica suspension and silica sediment showed very similar spectral shapes with similar lifetime values. In contrast, the excitation spectra of U(VI) measured from these samples were significantly different. The results show that distinctive excitation maxima appeared at approximately 220 and 280 nm for the silica suspension and silica sediment, respectively.