• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.367-370
• /
• 2007

An EEFL with the sodium free alumino-silicate glass of high K and low $tan{\delta}$, has been investigated. As compared with borosilicate and the soda-lime EEFLs, the luminous efficiency as well as the pinhole stability of new EEFLs improves remarkably without blackening of $NaHg_2$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.347-348
• /
• 2008

언급한 바와 같이 사이즈별로 시장의 규모, 특징, 개발의 방향이 약간씩 달리하고 있으나 분명한 것은 공정단순화 및 광효율향상 포함한 원가절감을 위하여 기능성 시트들을 개발을 위한 활동이 활발하게 진행하고 있다. 광원은 중형이상의 경우 CCFL, EEFL이 주류를 이루고 있으나 초대형화, 고색재현, Local Dimming을 위한 LED 광원을 채택한 LED-BLU 개발을 활발히 진행 중이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.195-195
• /
• 2008

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

A lamp which is currently employed to LCD(Liquid Crystal Display) Backlight is almost CCFL(Cold Cathod Fluorescent Lamp) and EEFL(External Electrode Fluorescent Lamp). However, the use of these lamps is being restricted as RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) regulation is gradually reinforced. According to this situation, the manufacturing of a lamp which doesn't use mercury is unescapable. Moreover, LCD TV has a defect which take place Motion Blur phenomenon due to response time of LC(Liquid Crystal), and Hold-type characteristic which only exists in LCD differently to CRT, PDP. In this paper, an inverter is proposed to drive a plane light source lamp which is not containing mercury. Driving circuit of proposed inverter is simple because the number of semiconductor device and magnetic device is reduced by using forward topology. Also, Motion Blur phenomenon is decreased by dividing the plane light source lamp to six block along vertical direction, and scanning. Finally, we proved usefulness of proposed inverter through experiment.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.264-266
• /
• 2006

This paper presents a impedance model for the simulation of both static and dynamic characteristics of the electrodeless fulorescent lamp. A behavioral, PSpice compatible, model has been developed for the electrodeless fluorescent lamp. The model was tested at steady-state for different power levels, with an LCC modulated drive. and this model is established from some equations and measured electrical characteristics of EEFL. The validity of proposed lamp model is verified from the simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.465-469
• /
• 2004

액정 디스플레이의 백라이트 광원으로 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp)가 일반적으로 사용된다 최근 LCD 모니터의 두께는 갈수록 얇아지며, 화면은 넓어지고 있는 대형화 추세이다. 기존의 권선형 변압기를 이용 인버터를 구성하여 멀티램프를 구동하고 있지만 이는 코어나 권선 손실에 의한 효율 저하와 부피나 중량의 증가, 그리고 과열에 의한 화재의 위험성을 가지고 있다. 이러한 문제들을 해결하기 위해 본 논문에서는 압전 변압기를 이용한 멀티램프 구동용 인버터를 설계 지침에 따라 구성하였다. 인버터 하나로 압전변압기를 병렬로 연결하는 방식을 이용하였고, 또한 전류 부담이 적은 외관 전극 형광 램프(EEFL: External Electrode Fluorescent Lamp)를 이용한 멀티램프 구동 방법을 압전 인버터에 적용 가능한지 고찰하였다. 적용한 방식으로는 풀-브리지 (Full-Bridge)회로를 응용하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1586-1589
• /
• 2007

The influence of optical components constituting the backlight of TV on the luminance property of backlight was analyzed. The variation of luminance when the light emitted from light source passes each optical part was evaluated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1607-1610
• /
• 2007

The measurement technology of the electrical and optical properties of CCFL and EEFL for LCD-BLU is investigated. The lamp current and voltage are affected by the leakage of parasitic capacitance. The methods using the photometer and the integrating sphere are compared to determine the lamp efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1263-1266
• /
• 2006

A circuit model simulating the electrical characteristics of EEFL(External Electrode Fluorescent Lamp) is proposed. The model is based on linear approximation that represents the equivalent resistance and capacitance as a function of power. Simulation waveforms and experimental results are presented to verify feasibility of the equivalent model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1007-1009
• /
• 2008

This paper presents an architecture for driving multiple paralleled cold cathode fluorescent lamps (CCFLs) for back lighting applications. The key to the architecture is a proposed capacitive coupling approach for lamp ignition. This system is consist of a flyback converter, a single inverter to drive multiple lamps and conductive floating reflector. The topology is capable of driving a number of parallel lamps with independent accurate lamp, current regulation and improving cost effectiveness with significant reduction in size and weight, compared to typical high frequency ac ballast. Experimental demonstration results for ten of parallel CCFLs with simultaneous ignition. This like the EEFL it will be able to use the CCFL is the thing. Also, it investigates the effect where the leakage current goes mad to the Lamp.